Axis

2011-08-13T18:30:02Z

Astir13: /* AXIS M1031-W */

[[Image:Axis cameras.jpg]]

ZoneMinder will work well with just about any [http://www.axis.com Axis camera], including the 205, 206, 207, 209, 210, 211 and M10 ranges. It will also work with the 213 and 2130 cameras and support their [[PTZ]] functions through the web interface.

Please note that early 207's has some hardware issues. See [http://www.zoneminder.com/forums/viewtopic.php?t=5022 this thread] in the forum for details.
Also note that the [http://www.axis.com/techsup/cam_servers/cam_2100/index.htm 2100 has been discontinued by Axis] and no longer supported, possibly due to hardware related problems. It's noted in the [http://www.zoneminder.com/forums/viewtopic.php?t=10079 forums that the camera sends the pictures it captures somewhat diced up.]

How to Offload the Motion to cameras [[AxisMotionDetection]]

== AXIS 2110 ==

/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS 207W ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS P33XX-V/VE ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
or
<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS P1311 ==

<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS 213PTZ ==
The axis 213PTZ works perfectly. Use the folowing settings:
'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: 554
Remote Host Path: /mpeg4/media.amp

'''CONTROL'''
Controllable: Yes
Control Type: Axis API v2
Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>

The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the [[FAQ]])

The [[AxisMotionDetection]] trick works quite well with this camera.

The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.

This was tested with zoneminder 1.24.2 running on Gentoo stable

== AXIS M1031-W ==

[http://www.axis.com/products/cam_m1031w/ M1031-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480

[[Category:Cameras]]

== AXIS M1054 ==

Working just fine with my zoneminder setup under Ubuntu 10.04 and 11.04, using MJPEG setup.

My camera setup:
* Source type: remote
* Function: modect
* maximum fps 8.00
* alarm fps 30.00
* remote protocol: http
* remote method: simple
* remote host name: the DNS name of the camera (or IP adress I suppose)
* remote host port: 80
* remote host path: /axis-cgi/mjpg/video.cgi
* capture width: 1280
* capture height: 800

I just captured some thiefs with this setup, police caught them and used the pictures as proof. High quality pictures for that price of a camera and very reliable (running 1/2 year now without a single crash or disfunction).

ZoneMinder Wiki - User contributions [en]

Axis