Level One

2012-08-02T13:15:56Z

Bacci:

=== General information ===
This camera(s) works fine with zoneminder.

*Remote Host Name: user:password@<ip>
*Remote Host Port: 80 (is default, alternative 1024 when you've setup this port by webconfig)
*Remote Host Path: /img/video.mjpeg

=== WCS-2003 ===

This camera supports MP4 or MJPEG. Additional to the information above the remote path
is different:

* MP4 stream remote path: /img/video.asf

In the Monitor definition window of Zoneminder set following values: 
Select as source type: Ffmpeg 
Source Path: <nowiki>http://<your_camera_ip>/img/video.asf</nowiki> 
Set capture width and capture height according the configuration settings of your camera 

* MJPEG stream remote path: /img/mjpeg.jpg (not yet fully tested)

This camera has a Linux based firmware. The source code of the firmware is available at the
[http://www.level-one.de/levelone.php?page=prod&cat=7004&model=WCS-2003&show=downloads#tabs Level One WCS-2003 page] 
file [http://download.level1.info/gpl/WCS-2003(GPL)_2004-07-28.zip WCS-2003(GPL)_2004-07-28.zip] 

=== FCS-1101 ===

This camera supports MPEG4 or MJPEG. I just got MJPEG to work with Zoneminder. I didn't get RTSP (Port 554) and MPEG4 Port 8090 to work with Zoneminder, but it's no problem to access these ports with VLC. 
 
Here are the settings: 
*Source type: Remote 
*Remote Protocol: HTTP 
*Remote Method: Simple 
*Remote Hostname: Your Cameras IP 
*Remote Hostport: 8070 
*Remote Hostpath: /video.mjpg 
*Width: Set width depending to the image width you have configured 
*Height: Set height depending to the image width you have configured 

=== FCS-5030 ===

This camera is working with Zoneminder. 
 
Here are the settings: 
*Source type: Remote 
*Remote Protocol: HTTP 
*Remote Method: Simple 
*Remote Host Name: <USERNAME>:<PASSWORD>@<IP CAMERA> <-- example root:@192.168.1.2 
*Remote Host Port: 80 
*Remote Host Path: video.mjpg 
*Width: Set width depending to the image width you have configured 
*Height: Set height depending to the image width you have configured 

=== FCS-5051 ===

Unfortunately at this moment ffmpeg (svn date: 2011-12-21) doesn't support RTSP or MJPEG stream for this camera. Zoneminder works fine with JPG snapshot. 
 
Here are the settings: 
*Source type: Remote 
*Maximum FPS: 10 
*Alarm Maximum FPS: 12 
*Remote Protocol: HTTP 
*Remote Method: Simple 
*Remote Host Name: <USERNAME>:<PASSWORD>@<IP CAMERA> <-- example root:@192.168.1.2 
*Remote Host Port: 80 
*Remote Host Path: /cgi-bin/jpg/image.cgi? 
*Width: Set width depending to the image width you have configured 
*Height: Set height depending to the image width you have configured 

=== WCS-0030 (likely also FCS-0030 and perhaps other but not tested) ===

I got this camera (hardware version 2) to work in RTSP using the following settings: 

WCS-0030 configuration:
*Video >> Stream >> Video Codec: MPEG4
*Video >> RTSP Server >> Port: 554
*Video >> RTSP Server >> Authentication: None 

Zoneminder:
*Source type: Remote 
*Remote Protocol: RTSP 
*Remote Method: RTP/Unicast 
*Remote Hostname: login:password@YourIP 
*Remote Hostport: 554 
*Remote Hostpath: /channel1 
*Width: Set width depending to the image width you have configured 
*Height: Set height depending to the image width you have configured 

1280x800@15fps in highest quality works fine.

=== Other Level One cameras (not tested) ===

'''''Note: This is not tested, just for infomation.'''''

This information is from [http://knx-user-forum.de/praxis/3629-levelone-kameras.html here]:

Following cameras use URL '''<nowiki>http://IP-AddressCamera/cdi-bin/video.jpg</nowiki>''': 
FCS-1010, FCS-1030, FCS-1040, FCS-1060, FCS-1070, FCS-3000, FCS-3021, WCS-2010, WCS-2030, WCS-2040, WCS-2060, WCS-2070

The cameras FCS-0010, FCS-0020, FCS-1091, WCS-0010, WCS-0020, WCS-1090 are supporting MJPG, the URL is 
'''<nowiki>http://IP-address/video.mjpg</nowiki>'''

For the cameras FCS-1081, FCS-1081A, FCS-4000, FCS-4100, FCS-4200, FCS-4300, FCS-4400, FCS-4500, FCS-7011 the command to get
the actual JPG image is: 
'''<nowiki>http://ip_address_of_camera/cgi-bin/jpg/image</nowiki>''' and then '''<nowiki>http://ip_address_of_camera/jpg/image.jpg</nowiki>'''
or for MJPG '''<nowiki>http://IPaddresse:port/video.mjpg</nowiki>'''

The SDK´s for the Level One cameras could be downloaded from:

http://www.level1.tw/level1/other/SDK_2008-01-24.zip

[[Category:Cameras]]

ZoneMinder Wiki - User contributions [en]

Level One