ZoneMinder Wiki - User contributions [en]

Compro

2014-04-02T07:36:55Z

Difacom:

Cheap cameras from Taiwan (Despite the American references on the name)

IP70

Setup REQUIRES Internet Explorer (the configuration pages contain broken javascript which hide various settings and won't let you save settings unless you're running IE)

mjpeg is not. The browser page for live view is merely a javascript wrapper which requests a static jpg repeatedly. This would be fine for Zoneminder if it wasn't for the fact that the js appends a unique identifier to the end of each fetch and the camera appears to cache files without this. So if you dig through the html to find the url and try it in zm, zm will just record the first image repeatedly.

DOES work with RTSP / MPEG4 (Zoneminder 1.24.2)

However - it does NOT work very well! Feed drops out at random points. Zm reconnects ok, but it cannot be relied upon.

Source tab;

Remote Protocol RTSP
Remote Method RTP/RTSP
Remote Host Name IP of camera
Remote Host Port 554
Remote Host Path /medias2
Remote Image Colours 24 bit
Capture Width (pixels) 640
Capture Height (pixels) 480
Preserve Aspect Ratio Unticked
Orientation Normal

On the camera configuration;

Update to firmware "IP70 1.47"

Enter Setup, Camera tab;
Dot Turbo Picture
Tick "Enable 2nd stream"

Under Stream2 settings (Use IE if old firmware as FF doesn't save settings)

Untick 3GPP
Set Resolution to VGA
Codec: MPEG-4
Framerate 5
Quality 1Mbps

Update, November 2010 - Compro now have a new firmware - 1.51 - on their website. What it does is not fully listed - the page mentions it does SMS announcement and some other minor stuff, but I note the stream now works in firefox which it didn't before. [http://www.difacomsolusindo.com/jasa pembuatan website] | [http://www.doxapest.co.id/pembasmi rayap] although the controls are still broken. In IE, a new activex component requires installing and a restart is mandatory.

Ipcs

2014-03-12T12:29:40Z

Difacom:

I have the following line in /etc/modprobe.d/bttv.conf options bttv card=131,131,131,131,131,131,131,131

or on a newer system (as .conf is deprecated)

/etc/modprobe.d/mycapturecard options bttv card=131,131,131,131,131,131,131,131

I have 8x131 as I have 2 cards which I think is a WDT 2116. which gives me 16 inputs.
ipcs -m Shows what shared memory segments are in use and whom they are owned by.
[http://www.difacomsolusindo.com/ Jasa Pembuatan Website] | [http://www.doxapest.co.id/ Anti Rayap] | [http://www.doxapest.co.id Pembasmi Hama] | [http://garisbuku.com/ Toko Buku Online] | [http://www.doxapest.co.id/ Pembasmi Rayap]

Ipcs

2014-03-12T12:28:49Z

Difacom:

Ipcs

2014-03-12T12:26:18Z

Difacom:

I have the following line in /etc/modprobe.d/bttv.conf options bttv card=131,131,131,131,131,131,131,131

or on a newer system (as .conf is deprecated)

/etc/modprobe.d/mycapturecard options bttv card=131,131,131,131,131,131,131,131

I have 8x131 as I have 2 cards which I think is a WDT 2116. which gives me 16 inputs.
ipcs -m Shows what shared memory segments are in use and whom they are owned by.
[http://subconscious-therapy.com/hipnoterapi-surabaya/ Hipnoterapi Surabaya] | [http://littletods.com/en/content/4-perlengkapan-bayi Perlengkapan Bayi] | [http://www.pbtaxand.com/our-services/tax-advisory-services Konsultan Pajak] | [http://www.tiraimodern.com/product/vertical-blind Vertical Blind] | [http://www.tiraimodern.com/product/roller-blind Roller Blind]