ZoneMinder Wiki - User contributions [en]

Reolink

2020-11-13T07:51:26Z

Ffrrrr:

===Reolink Cameras That Can Work With ZoneMinder===

PoE camera: RLC-410, 520, 522, 423, 511, 510A, 520A, 810A, 820A, 1220A, 1210A;

WiFi camera: E1 Pro; E1 Zoom; 410W, 510W;

Learn more about these cameras in Reolink official site: https://reolink.com/

Please note:

#1. The list doesn't include the discontinued products. If you want to learn about these discontinued device, please ask Reolink employee in reddit: https://www.reddit.com/r/reolinkcam/ . Thanks!

#2. The models that have "A" in the name are the cameras having on-board Person/Vehicle Detection, that is, RLC-510A, 520A, 810A, 820A, 1220A, 1210A. You may not use this local smart detection with Zoneminder, but you can use the advanced AI powered detection feature supported by the ZM.

#3. When there are new products, this list will be updated.

===Reolink Cameras (Recommended)===
The latest step-by-step guide here

https://www.reddit.com/r/reolinkcam/comments/jnurzm/adding_reolink_cameras_to_zoneminder_nvr/

===RLC-410===
There is a lengthy forum thread here:
https://forums.zoneminder.com/viewtopic.php?f=10&t=25874

===RLC-423===

<pre>
Soooo, after lots of reading and just as much trial and error, I came up with this config that seems to work best:

Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
Options: reorder_queue_size=5000,allowed_media_types=video,buffer_size=10000000
Capture Resolution: 640x480
Controllable: yes
Control Address: admin:password@10.0.0.165:8000
Auto Stop Timeout: 0.25

The high quality stream is "channel0_main", the low quality on "channnel0_sub". Strangely, the high quality channnel only works when I put the low quality resolution. So instead of 2560x1920 I need to put 640x480. That was a hard thing to find.

On the camera the following settings seem to provide the best results in ZM:

Clear Stream:
Resolution: 2560x1920
Frame Rate: 30
Maximum Bitrate: 6144
H2.64 Profile: Base

Fluent Stream:
Resolution: 640x480
Frame Rate: 7
Maximum Bitrate: 160
H2.64 Profile: Base
</pre>
Ref: https://forums.zoneminder.com/viewtopic.php?f=14&t=30078

===RLC-520===

[[File:REOLINK-PoE-IP-Camera-Outdoor-5MP-rlc-520.jpg|200px]]

Learn more about this camera: https://reolink.com/product/rlc-520/

<pre>
Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
</pre>

The default username/password on this model is "admin" and an empty password, but I had to set a password before the source path above would work.

If you want audio with the video recordings place this in the "Options" field of the "Source" tab:
<pre>
allowed_media_types=video,audio
</pre>

And use this option in the "Video Writer" field of the "Storage" tab:
<pre>
H264 Camera Passthrough
</pre>

Reolink

2020-11-13T07:49:33Z

Ffrrrr:

===Reolink Cameras That Can Work With ZoneMinder===

PoE camera: RLC-410, 520, 522, 423, 511, 510A, 520A, 810A, 820A, 1220A, 1210A;

WiFi camera: E1 Pro; E1 Zoom; 410W, 510W;

Learn more about these cameras in Reolink official site: https://reolink.com/

Please note:

#1. The list doesn't include the discontinued products. If you want to learn about these discontinued device, please ask Reolink employee in reddit: https://www.reddit.com/r/reolinkcam/ . Thanks!

#2. The models that have "A" in the name are the cameras having on-board Person/Vehicle Detection, that is, RLC-510A, 520A, 810A, 820A, 1220A, 1210A. You may not use this local smart detection with Zoneminder, but you can use the advanced AI powered detection feature supported by the ZM.

#3. When there are new products, this list will be updated.

===Reolink Cameras (Recommended)===
The latest step-by-step guide here

https://www.reddit.com/r/reolinkcam/comments/jnurzm/adding_reolink_cameras_to_zoneminder_nvr/

===RLC-410===
There is a lengthy forum thread here:
https://forums.zoneminder.com/viewtopic.php?f=10&t=25874

===RLC-423===

<pre>
Soooo, after lots of reading and just as much trial and error, I came up with this config that seems to work best:

Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
Options: reorder_queue_size=5000,allowed_media_types=video,buffer_size=10000000
Capture Resolution: 640x480
Controllable: yes
Control Address: admin:password@10.0.0.165:8000
Auto Stop Timeout: 0.25

The high quality stream is "channel0_main", the low quality on "channnel0_sub". Strangely, the high quality channnel only works when I put the low quality resolution. So instead of 2560x1920 I need to put 640x480. That was a hard thing to find.

On the camera the following settings seem to provide the best results in ZM:

Clear Stream:
Resolution: 2560x1920
Frame Rate: 30
Maximum Bitrate: 6144
H2.64 Profile: Base

Fluent Stream:
Resolution: 640x480
Frame Rate: 7
Maximum Bitrate: 160
H2.64 Profile: Base
</pre>
Ref: https://forums.zoneminder.com/viewtopic.php?f=14&t=30078

===RLC-520===

[[File:REOLINK-PoE-IP-Camera-Outdoor-5MP-rlc-520.jpg|200px]]

[https://reolink.com/product/rlc-520/]

<pre>
Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
</pre>

The default username/password on this model is "admin" and an empty password, but I had to set a password before the source path above would work.

If you want audio with the video recordings place this in the "Options" field of the "Source" tab:
<pre>
allowed_media_types=video,audio
</pre>

And use this option in the "Video Writer" field of the "Storage" tab:
<pre>
H264 Camera Passthrough
</pre>

Reolink

2020-11-13T07:46:43Z

Ffrrrr:

===Reolink Cameras That Can Work With ZoneMinder===

PoE camera: RLC-410, 520, 522, 423, 511, 510A, 520A, 810A, 820A, 1220A, 1210A;

WiFi camera: E1 Pro; E1 Zoom; 410W, 510W;

Learn more about these cameras in Reolink official site: https://reolink.com/

Please note:

#1. The list doesn't include the discontinued products. If you want to learn about these discontinued device, please ask Reolink employee in reddit: https://www.reddit.com/r/reolinkcam/ . Thanks!

#2. The models that have "A" in the name are the cameras having on-board Person/Vehicle Detection, that is, RLC-510A, 520A, 810A, 820A, 1220A, 1210A. You may not use this local smart detection with Zoneminder, but you can use the advanced AI powered detection feature supported by the ZM.

#3. When there are new products, this list will be updated.

===Reolink Cameras===
The latest step-by-step guide here

https://www.reddit.com/r/reolinkcam/comments/jnurzm/adding_reolink_cameras_to_zoneminder_nvr/

===RLC-410===
There is a lengthy forum thread here:
https://forums.zoneminder.com/viewtopic.php?f=10&t=25874

===RLC-423===

<pre>
Soooo, after lots of reading and just as much trial and error, I came up with this config that seems to work best:

Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
Options: reorder_queue_size=5000,allowed_media_types=video,buffer_size=10000000
Capture Resolution: 640x480
Controllable: yes
Control Address: admin:password@10.0.0.165:8000
Auto Stop Timeout: 0.25

The high quality stream is "channel0_main", the low quality on "channnel0_sub". Strangely, the high quality channnel only works when I put the low quality resolution. So instead of 2560x1920 I need to put 640x480. That was a hard thing to find.

On the camera the following settings seem to provide the best results in ZM:

Clear Stream:
Resolution: 2560x1920
Frame Rate: 30
Maximum Bitrate: 6144
H2.64 Profile: Base

Fluent Stream:
Resolution: 640x480
Frame Rate: 7
Maximum Bitrate: 160
H2.64 Profile: Base
</pre>
Ref: https://forums.zoneminder.com/viewtopic.php?f=14&t=30078

===RLC-520===

[[File:REOLINK-PoE-IP-Camera-Outdoor-5MP-rlc-520.jpg|200px]]

[https://reolink.com/product/rlc-520/]

<pre>
Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
</pre>

The default username/password on this model is "admin" and an empty password, but I had to set a password before the source path above would work.

If you want audio with the video recordings place this in the "Options" field of the "Source" tab:
<pre>
allowed_media_types=video,audio
</pre>

And use this option in the "Video Writer" field of the "Storage" tab:
<pre>
H264 Camera Passthrough
</pre>

Reolink

2020-11-13T07:38:51Z

Ffrrrr:

===Reolink Cameras===
The step-by-step guide here (can applies to most of reolink cameras)

https://www.reddit.com/r/reolinkcam/comments/jnurzm/adding_reolink_cameras_to_zoneminder_nvr/

===RLC-410===
There is a lengthy forum thread here:
https://forums.zoneminder.com/viewtopic.php?f=10&t=25874

===RLC-423===

<pre>
Soooo, after lots of reading and just as much trial and error, I came up with this config that seems to work best:

Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
Options: reorder_queue_size=5000,allowed_media_types=video,buffer_size=10000000
Capture Resolution: 640x480
Controllable: yes
Control Address: admin:password@10.0.0.165:8000
Auto Stop Timeout: 0.25

The high quality stream is "channel0_main", the low quality on "channnel0_sub". Strangely, the high quality channnel only works when I put the low quality resolution. So instead of 2560x1920 I need to put 640x480. That was a hard thing to find.

On the camera the following settings seem to provide the best results in ZM:

Clear Stream:
Resolution: 2560x1920
Frame Rate: 30
Maximum Bitrate: 6144
H2.64 Profile: Base

Fluent Stream:
Resolution: 640x480
Frame Rate: 7
Maximum Bitrate: 160
H2.64 Profile: Base
</pre>
Ref: https://forums.zoneminder.com/viewtopic.php?f=14&t=30078

===RLC-520===

[[File:REOLINK-PoE-IP-Camera-Outdoor-5MP-rlc-520.jpg|200px]]

[https://amzn.to/2J7OrqG REOLINK PoE IP Camera Outdoor 5MP]

[https://amzn.to/2J7OrqG https://amzn.to/2J7OrqG]

<pre>
Source Type: ffmpeg
Source Path: rtmp://10.0.0.165:1935/bcs/channel0_main.bcs?channel=0&stream=0&user=admin&password=password
Method: UDP
</pre>

The default username/password on this model is "admin" and an empty password, but I had to set a password before the source path above would work.

If you want audio with the video recordings place this in the "Options" field of the "Source" tab:
<pre>
allowed_media_types=video,audio
</pre>

And use this option in the "Video Writer" field of the "Storage" tab:
<pre>
H264 Camera Passthrough
</pre>