ZoneMinder Wiki - User contributions [en]

Talk:D-Link

2017-01-12T20:24:03Z

Jarod83: /* DCS-820L babycam */

These URLs might be of interest to owners of a D-Link DCS-5222L PTZ ip camera.

move to preset #0: /cgi/ptdc.cgi?command=goto_preset_position&presetId=0
move to home position: /cgi/ptdc.cgi?command=go_home
pan left by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=-10&posY=0
pan right by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=10&posY=0
tilt up by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=0&posY=10
tilt down by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=0&posY=-10
auto pan: /cgi/ptdc.cgi?command=pan_patrol
auto pan/tilt between user configured positions: /cgi/ptdc.cgi?command=user_patrol
stop auto: /cgi/ptdc.cgi?command=stop

When given command to pan further than possible, the cam will refuse to do so.

--[[User:Bjornr1989|Bjornr1989]] ([[User talk:Bjornr1989|talk]]) 22:17, 30 April 2014 (BST)

Try the [[TV-IP672PI_Control_Script]] that I uploaded. It appears to use the nearly the same command set. Should at least point you in the right direction. [[User:Thekorn|Thekorn]] ([[User talk:TheKorn|talk]])

== DCS-5009: ==

DCS-5009 works with same settings as DCS-5010L, DCS-5020L and DCS-5025L

== DCS-820L babycam ==
<pre>
Source Type: Remote
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /video/mjpg.cgi
Colors: 24 bit
Capture width: 640
Capture Height: 480
</pre>

Talk:D-Link

2017-01-12T20:20:16Z

Jarod83: /* DCS-820L babycam */ new section

These URLs might be of interest to owners of a D-Link DCS-5222L PTZ ip camera.

move to preset #0: /cgi/ptdc.cgi?command=goto_preset_position&presetId=0
move to home position: /cgi/ptdc.cgi?command=go_home
pan left by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=-10&posY=0
pan right by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=10&posY=0
tilt up by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=0&posY=10
tilt down by 10 units: /cgi/ptdc.cgi?command=set_relative_pos&posX=0&posY=-10
auto pan: /cgi/ptdc.cgi?command=pan_patrol
auto pan/tilt between user configured positions: /cgi/ptdc.cgi?command=user_patrol
stop auto: /cgi/ptdc.cgi?command=stop

When given command to pan further than possible, the cam will refuse to do so.

--[[User:Bjornr1989|Bjornr1989]] ([[User talk:Bjornr1989|talk]]) 22:17, 30 April 2014 (BST)

Try the [[TV-IP672PI_Control_Script]] that I uploaded. It appears to use the nearly the same command set. Should at least point you in the right direction. [[User:Thekorn|Thekorn]] ([[User talk:TheKorn|talk]])

== DCS-5009: ==

DCS-5009 works with same settings as DCS-5010L, DCS-5020L and DCS-5025L

== DCS-820L babycam ==

Source Type: Remote
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /video/mjpg.cgi
Colors: 24 bit
Capture width: 640
Capture Height: 480

Talk:D-Link

2017-01-12T19:43:51Z

Jarod83: /* DCS-5009: */ new section