ZoneMinder Wiki - User contributions [en]

Airlink 101

2011-03-16T19:29:28Z

Joymonkey: added page to the 'Network Cameras' category

== AIC250W ==

Airlink101 AIC250 settings for 2 fps as JPG stream: to use this camera with Zoneminder with JPG stream, use these settings for the Monitor: "hostname = <ip of camera>", "path = /image.jpg", use these settings for Options: "ffmpeg" as encoder, "jpg" stream and not mpeg. Select the right resolution for the camera, such as 640x480. To set the resolution for the camera, use a web browser and go to the configuration pages http://<ip of camera>. While in the configuration pages, delete the username and password to get the camera to work with these settings. Save the camera configuration.

AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200

== AICN747/AICN747W (Airlink101 SkyIPCam 747W) ==

Same Camera as Fitivision CS-130A/CS-131A and TrendNet TV-IP410/TV-IP410W. The 'W'/CS-131A version is wireless. Note: the Trendnet cameras have no built-in IR illumination.

The device requires authentication, so you need to provide the Remote Host Name parameter with
hostname = <username>:<password>@<ip of camera>
path = /cgi/jpg/image.cgi for JPEG stills, or /cgi/mjpg/mjpg.cgi for MJPEG (MJPEG mode requires firmware v1.0.0-24 or later)

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: <username>:<password>@<ip of camera>

Remote Host Port: 80

Remote Host Path: /cgi/mjpg/mjpg.cgi

Remote Image colors: 24 bit

Capture Width: 640

Capture Height: 480
*[http://www.zoneminder.com/forums/viewtopic.php?t=12271 SkyIPCam 7xx PTZ module for ZM and example audio push/dump scripts]
*[http://www.zoneminder.com/forums/viewtopic.php?t=12238 Additional info on the AirLink SkyIPCam 747W]

== Airlink Skyipcam777w ==

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: {username}:{password}@{camera ip}

Remote Host Port: 80

Remote Host Path: /cgi/mjpg/mjpg.cgi

Remote Image colors: 24 bit

Capture Width: 640

Capture Height: 480

*[http://www.zoneminder.com/forums/viewtopic.php?t=14094 Additional info on the 777W]

[[Category:Cameras]]
[[Category:Network Cameras]]

Instar

2011-03-16T19:28:44Z

Joymonkey: added page to the 'Network Cameras' category

==IN2905==

You have two methods to access the images (see Remote Host Path):

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: {username}:{password}@{camera ip}

Remote Host Port: 80

Remote Host Path: /videostream.cgi?
or
Remote Host Path: /snapshot.cgi?

Remote Image colors: 24 bit

Capture Width: 640

Capture Height: 480

Select the right resolution for the camera, such as 640x480.
To set the resolution for the camera, use a web browser and go to the configuration page of the camera. While in the configuration page, also set the the username and password accordingly.

[[Category:Cameras]]
[[Category:Network Cameras]]

Cisco

2011-03-16T19:27:57Z

Joymonkey: added page to the 'Network Cameras' category

WVC80N

*MPEG-4
**Source Type: ffmpeg
**Source Path: http://##.##.##.##/img/video.asf OR http://User:Pass@##.##.##.##/img/video.asf

*MJPEG
**Remote Protocol: HTTP
**Remote Method: Simple
**Remote Host Name: ip.address (or User:pass@ip.address if you configured the cam to only allow authenticated viewing)
**Remote Host Port: 80 (or whatever port you are forwarding if remote)
**Remote Host Path: /img/video.mpjeg OR /img/mjpeg.cgi

[[Category:Cameras]]
[[Category:Network Cameras]]

D-Link

2011-03-16T19:25:15Z

Joymonkey: added page to the 'Network Cameras' category

DLink is a supplier of several IP Cameras. Not all work with ZoneMinder.
DCS-1000(W) and DCS-900 - plus other D-Link IP models (This have been hit and miss, not all work with ZM. A partial list of unsupported cameras are inside).

=DCS-900=
[[Image:DCS900.png]]

There are 2 versions of this camera. The "A" version is reported to work extremely well with ZoneMinder. The "B" version also works, but has a been reported to have lesser performance. I have been able to get upto 8 fps with my revision "B" camera.

Source Type: Remote
Remote Host Name: IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /VIDEO.CGI or /IMAGE.JPEG
(/VIDEO.CGI is the MJpeg stream, and gets higher FPS in my testing)

With version A2
Source Type: Remote
Remote Host Name: user:pass@<IP_Address_of_Camera> (user:pass@192.168.0.5)
Remote Host Port: 80 (Default)
Remote Host Path: VIDEO.CGI

With the latest versions of the DCS-900 "B" there is an additional step needed in the "Options > Network" section of ZoneMinder.
ZM_NETCAM_REGEXPS Value = (no-checkmark)

=DCS-910 / 920=
[[Image:DCS-910.jpg]]

Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /VIDEO.CGI? for stream

There is the same aditional step as in DCS-900B, in the "Options > Network" section of ZoneMinder.
ZM_NETCAM_REGEXPS Value = (no-checkmark)

=DCS-930L=
[[Image:DCS-930L.jpg]]

Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /image/jpeg.cgi

=DCS-2100+, DCS-2100G=
[[Image:DSC2100plus.jpg]][[Image:DCS2100g.jpg]]
Source Type: Remote
Remote Host Name: IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /cgi-bin/video.jpg

Note: you must change Network -> ZM_HTTP_VERSION option to 1.0 for this camera to work!

=DCS-2120=
[[Image:DCS2100g.jpg]]

Source Type: Remote
Remote Host Name: IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /cgi-bin/video.jpg

=DCS-2121=
Source Type: Remote
Remote Host Name: username:password@cam_ip
Remote Host Port: 80 (Default)
Remote Host Path: /image/jpeg.cgi?profileid=1

=DCS-3220=
[[Image:DCS-3220.jpg]]
Source Type: Remote
Remote Host Name: IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /cgi-bin/video.jpg

=DCS-5300G=

[[Image:DCS-5300G.jpg]]

Source Type: Remote
Remote Host Name: IP Address of Camera
Remote Host Port: 80 (Default)
Remote Host Path: /cgi-bin/video.jpg

Note: you must change Network -> ZM_HTTP_VERSION option to 1.0 for this camera to work!

=DCS-6620G=

[[Image:DCS-6620G.jpg]]

Source type: Remote
Remote Host Name: IP Address of Camera
Remote Host Port: 80 (Default) or the non-default port assigned to the camera in your network
Remote host Path: /cgi-bin/video.jpg
Control script: download at www.condrau.com/download/zmcontrol-dcs6620g.pl

The control script supports all controls for this camera, but it can be used for other D-Link and Vivotek cameras as well. I verified it with DCS-6620 and Vivotek's PT7137, as the software is compatible with these 2 cameras. It should also work with other models such as the DCS-5300.

Note that I implemented a real name preset functionality, where you can set any desired name as the preset name. It is basically possible to set the presets through ZM's interface, but I prefer to do it through the cam's firmware interface, which is the default setting in the script. By changing one constant definition, you may change this behaviour. In any case still activate the "can set presets" option in ZM, after which you can assign names to each preset.

I would further recommend to update the cam's firmware. I found smoother operation in ZM after having updated the firmware, and also with the latest firmware you can set ZM_HTTP_VERSION option to 1.1.
[bco]

=DCS-3410=

[[Image:DSC-3410.jpg]]

HTTP
Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /video/mjpg.cgi (for mjpeg stream)

RTSP
Source Type: ffmpeg
Source Path: rtsp://user:pass@<IP Address of Camera>/play1.sdp (or play2.sdp)

ZoneMinder 1.24.2 (Haven't tried earlier versions)

Tried it with just admin:@<IP Address of Camera> without password before setting camera password and it worked. Created an account with a password, tried that and it also worked.

May need /video/mjpg.cgi?profileid=3 caught that from tcpdump, suspect the numbers are resolution but don't seem to have any affect.

Seems like it's operating in factory default Profile 3, 704x480 10fps jpeg. Haven't found a way to change the Profile used yet. Could only pull about 22fps when camera was set to 30fps (mjpeg) so opted to set camera to 15fps.

RTSP works with ffmpeg as above pulling 30fps when camera set to 30fps for that Profile but could not get it working with Source Type Remote and Remote Protocol RTSP.

Looks like Audio is at /audio/ACAS.cgi but haven't done anything with that.

=DCS-3710=
HTTP
Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /video2.mjpg (for stream 2)

ZoneMinder 1.24.3 (Haven't tried earlier versions)

Video profile mode must be set to JPEG.

=Incompatible Hardware=

I know that the DCS-1110 is not compattible with ZoneMinder, as it requires ActiveX to recive the MJpeg stream.

If you know of other DLink cameras that don't work, please add them to the list!

DCS-950 not compatible. Mpeg stream. Authentication is OCX application based, not web standard authentication. JPG file generated at random url, not predictable.

[[Category:Cameras]]
[[Category:Network Cameras]]

Trendnet

2011-03-16T19:23:54Z

Joymonkey: added page to the 'Network Cameras' category

= TV-IP100 =
Trendnet TV-IP100 works ok.
http://x.x.x.x/video.cgi

= TV-IP100W-N =
great little wireless camera with digital zoom

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

=TV-IP110 & TV-IP110W=

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <username>:<password>@x.x.x.x
Remote host Port: 80
Remote Host Path: /cgi/mjpg/mjpg.cgi
Remote Image Colors: 24 bit color
Capture Width: 640
Capture Height: 480

The capture height and width can be changed using the camera's web interface by modifying the "Video Quality" setting.
VGA = 640 x 480
QVGA = 320 x 240
QQVGA = 160 x 120

= TV-IP201P =
The TV-IP201P works ok. Use the following settings:
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass and 192.168.0.30 is the default IP)
Remote Host Port: 80
Remote Host Path: /goform/capture

= TV-IP252P =

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default)
Remote Host Port: 80
Remote Host Path: cgi/mjpg/mjpg.cgi

= TV-IP300 =
Just remember to turn 1.0 in ZM_HTTP_VERSION in the Options > Network tab. In the x.x.x.x/cgi-bin/video.jpg gives 352 x 240 jpg.

= TV-IP301 =
This camera sends the wrong mime/type and is not compatible with ZoneMinder natively but can be made to work.

http://www.zoneminder.com/forums/viewtopic.php?t=7320

= TV-IP400 / TV-IP400W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.

New Driver and instructions for ZM 1.23.x :
http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/

Older Driver and instructions for 1.22.x:
http://www.sfpeter.com/2007/08/14/controlling-the-trendnet-tv-ip400w-camera-with-zoneminder/
The above link is missing the "Move" tab when creating the control. You need to select "Can Move", "Can Move Diagonally" and "Can Move Relative".

= TV-IP501P =
This camera works just like the IP400 without the PTZ contols.

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

= TV-IP501W =

the Trendnet IP501W works. Here are the settings

Source Type: Remote

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: username:password@IP-address

Remote Host Port: 80

Remote Path: /video.cgi

=TV-IP512P=

[[Image:TV-IP512P.jpg]]

HTTP
Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /video/mjpg.cgi (for mjpeg stream)
Remote Host Path: /image/jpeg.cgi (for a single jpeg frame)

RTSP
Source Type: ffmpeg
Source Path: rtsp://user:pass@<IP Address of Camera>/play1.sdp (or play2.sdp)

ZoneMinder 1.24.2 (Haven't tried earlier versions)

RTSP works with ffmpeg as above pulling 30fps when camera set to 30fps for that Profile.

Alternatively, the monitor can be configured:

Source Type: Remote
Remote Protocol: RTSP
Remote Method: RTP/Unicast
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 554
Remote Host Path: /play1.sdp

When using the above ffmpeg RTSP and camera is set to Night Mode using the 30fps setting fps drop to 15fps in the dark as per the warning that this may happen at low light levels.

=TV-IP512WN=
The TV-IP512WN is pretty much the same device as TV-IP512P. It features an additional WLAN interface and can be used with the same settings as the [[Trendnet#TV-IP512P|TV-IP512P]].

=TV-IP522P=
Warning: even though this is a 'MegaPixel' camera, it has a very wide-angle lens so the image detail isn't very high. Furthermore, replacement 1/2" lenses seem to be hard to find.

ZM configuration is similar to TV-IP512P (above) except the 522 has multiple video profiles, which should be specified as

Remote Host Path: /video/mjpg.cgi?profileid=1

(1, 2, or 3, depending on the desired profile)

Also be sure to set Capture Width and Capture Height appropriately.

MPEG and RTSP were not tested but the camera does support them.

[[Category:Cameras]]
[[Category:Network Cameras]]

Linksys

2011-03-16T19:22:20Z

Joymonkey: added page to the 'Network Cameras' category

WVC-210 PTZ

remote host path = /img/video.mjpeg

http://www.zoneminder.com/forums/viewtopic.php?t=13484&highlight=cameras

WVC2300 / PVC2300

A few options for these cameras:

*Base hit uses still image snapshots:
**Remote Host Name: user:password@ip.ad.dr.ess
**Remote Host Path: img/snapshot.cgi?size=3&quality=1
***size=1-3 (160x120, 320x240, 640x480)
***quality=1-5(very high - very low)
*Even better solution is to use pushed jpegs:
**Remote Host Name: user:password@ip.ad.dr.ess
**Remote Host Path: img/mjpeg.jpg
**Use the web administration UI for the camera to set size, quality and framerate throttling
*Would like to use ffmpeg, however this seems to be giving problems - partial image scans etc
**Source Path: http://user:password@ip.ad.dr.ess/img/video.asf
**Seems to use size and quality settings from the administration website
*What doesnt work
**img/video.mjpeg (and other similar urls). Generally barfs on zm_remote_camera_http.cpp:134, and I cant be bothered debugging it.
*Other notes
**See [http://www.lavrsen.dk/foswiki/bin/view/Motion/NetcamMjpegStreamDumps] for information from the 'motion' application (scroll down to Linksys WVC54G which gave me some hints)

WVC54GC

*Source Type: ffmpeg
*Source Path: http://##.##.##.##/img/mjpeg.cgi

[[Category:Network Cameras]]

Y-Cam

2011-03-16T19:20:59Z

Joymonkey: added page to the 'Network Cameras' category

Y-Cam Black:

RTSP MPEG4 stream: /live_mpeg4.sdp

RTSP MJPEG stream: /live_mjpeg.sdp

HTTP MPEG4 stream: /stream.av

HTTP MJPEG stream: /stream.jpg

HTTP snapshot image: /snapshot.jpg

Size of each stream is setup in preferences. Normally recommended to leave primary stream as the maximum and set the secondary stream for 320x240 for thumbnails or smaller recorded streams.

Note: Colour balance on some of the Y-Cam blacks is /very/ off. Greens as pinks etc.

Do not use this camera if colour is important, however as a night-time room Infra-red camera it is very suitable. We use several for welfare monitoring of horses.

[[Category:Network Cameras]]

Category:Network Cameras

2011-03-16T19:18:31Z

Joymonkey: added note about this category

'''Note:''' Cameras listed under Network Cameras on the [[Hardware_Compatibility_List#Network_Cameras|Hardware Compatibility List]] page should appear in this sub-category.
[[Category:Cameras]]

Category:Network Cameras

2011-03-16T19:14:39Z

Joymonkey: added this category to the 'Cameras' category

[[Category:Cameras]]

Maygion

2011-03-16T19:13:24Z

Joymonkey: added this page to the 'Network Cameras' category.

== How to setup Maygion IP CAM (or clones) ==

Camera IP-603 (wifi/LAN)

http://www.maygion.com/Picfiles/ip-603.jpg

Camera IP-604 (LAN)

http://www.maygion.com/Picfiles/ip-604.jpg

'''Camera useful information'''

Support/downloads-> http://www.maygion.com/

Camera specs-> http://www.maygion.com/product_ui.html

CGI commands manual-> http://www.maygion.com/downloads/20091208/IPCamera%20CGI%20manual.pdf

I recommend to setup the camera settings using Windows (yes...I have to recognize that using the ActiveX and IE makes it easier than sending CGI commands...., am I lazy?), but you could setup your camera using CGI commands as follows:

'''Setting video resolution'''

QVGA(320x240) -> http://XXX.XXX.XXX.XXX/cgi.cmd?cmd=setqvga?usr=your_user&pwd=your_pwd

VGA(640x480) -> http://XXX.XXX.XXX.XXX/cgi.cmd?cmd=setvga?usr=your_user&pwd=your_pwd

== Zoneminder settings (these are the settings I'm using, change them to match your needs as appropriate): ==

'''General Tab:'''

Source Type : Remote

Enabled : checked

Maximum FPS : 6

Alarm Maximum FPS : 12

Reference Image Blend %ge : 9

'''Source Tab:'''

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: put.your.cam.ip

Remote Host Port: 80

Remote Host Path: /snapshot.cgi?usr=your_user&pwd=your_pwd

Remote Image Colors: 24 bit color

Capture Width (pixels): 320

Capture Height (pixels): 240

'''Buffers:'''

Image Buffer Size (frames): 40

Warmup Frames: 18

Pre Event Image Count: 18

Post Event Image Count: 60

Stream Replay Image Buffer: 480

Alarm Frame Count: 4

Hope it helps,

--[[User:PacoLM|PacoLM]] 08:53, 17 March 2010 (UTC)

[[Category:Network Cameras]]