General Notes

2017-12-28T16:19:54Z

Kvantum: /* Create and Populate the Database */

==Zoneminder Build Notes==
==== Required for Building ====
* MySQL [http://www.lamphowto.com www.lamphowto.com] Notes on compiling MySQL from source
* OpenSSL
* PHP
* Apache
* Perl/Libperl
./configure will complain if anything is missing.

==== Installing from Source ====
* http://www.zoneminder.com/fileadmin/downloads/README.html 
* http://www.zoneminder.com/forums/viewtopic.php?t=5715 
* http://www.zoneminder.com/forums/viewtopic.php?t=5929 
:./configure --with-mysql=/usr/local/mysql
:--with-ffmpeg=/home/src/ffmpeg-0.4.9-pre1
:--with-lame=/home/src/lame-3.96.1/libmp3lame
:--with-webdir=/home/sites/Security.658Ridgecrest.com/web
:--with-cgidir=/home/sites/Security.658Ridgecrest.com/web
:--with-webuser=httpd
:--with-webgroup=httpd
:--with-libarch=lib
:--enable-debug=yes
OR
:./configure --with-webdir=/var/www/htdocs/ZM
:--with-cgidir=/var/www/cgi-bin --sysconfdir=/etc
:--with-webuser=httpd
:--with-webgroup=httpd
OR
* http://www.zoneminder.com/forums/viewtopic.php?t=6053
:./configure --with-webdir=/var/www/html/zm
:--with-cgidir=/var/www/cgi-bin ZM_DB_PASS=<password>

==== Create and Populate the Database ====
* http://forums.zoneminder.com/viewtopic.php?t=5754 
* http://forums.zoneminder.com/viewtopic.php?t=6023 
<code>
:mysql mysql < db/zm_create.sql
:mysql mysql
:> grant select,insert,update,delete on <database name>.* to '<database user>'@localhost identified by '<database password>';
:> quit
: mysqladmin reload</code>

==== Misc Notes (Anyone care to categorize?) ====
Check zone.conf or zm.conf. Check that there are no bogus vesions of this file lying around. 
"nobody" doesn't have shell access, choose a different Apache alias like "httpd". 
zmdc.log or /var/log/messages log any errors. 
zm.sock file must be able to be created.

==Apache ==

==== Permissions Problems ====
* http://www.zoneminder.com/forums/viewtopic.php?t=5642
<code>sudo -u apache /etc/rc.d/rc.zoneminder start</code>
** now.. zmc and zma is running on user apache

==== su Issue ====
http://www.zoneminder.com/forums/viewtopic.php?t=5652

==== Allowing CGI Execution (REQUIRED for ZM) ====
http://www.zoneminder.com/forums/viewtopic.php?t=5853
*/usr/local/etc/zm.conf must exist and what process owns it.
webuser and webgroup must be correct for apache to have ownership over zm.conf

==BIOS Issues==
Turning off ACPI power management in the BIOS may help alleviate some issues with ZoneMinder and capture hardware.

==Brightness control==
* http://www.zoneminder.com/forums/viewtopic.php?t=3953
* http://www.zoneminder.com/forums/viewtopic.php?t=5680
* http://www.zoneminder.com/forums/viewtopic.php?t=3657

== Contribs Forum==
The [http://www.zoneminder.com/forums/viewforum.php?f=9 contribs forum] contains contributions from ZoneMinder users like yourself!

==Cambozola==
Cambozola is a Java plugin that decodes multipart JPEG streams. Mozilla-based browser have native support, so this plugin is for browsers like Internet Explorer that lack that support.

To install Cambozola for use in zm, Download the cambozola.jar file from the Downloads page or directly from the charliemouse website. If you download from charliemouse you will need to extract the one file (cambozola.jar) from the archive. Place cambozola.jar in the ZM root web directory (so if your web pages for ZM is installed at /var/www/html/zm the file should go there as well). Now all thats left to be done is to enable it in ZM goto options and under the web tab check that cambozola is enabled. In 1.25 you will find OPT_CAMBOZOLA under the '''Images''' tab. That's it, you're done.

* http://www.zoneminder.com/forums/viewtopic.php?t=5745
* http://www.zoneminder.com/forums/viewtopic.php?t=6320

NOTE: If you find that the Cambozola applet loads in IE but the applet just displays the version # of Cambozola and the author's name (as opposed to seeing the streaming images), you may need to chmod your cambozola.jar:

$ sudo chmod 775 cambozola.jar

Once I did this, images started to stream for me.

NOTE: If you find that Cambozola doesn't load in IE at all, but instead you get a black 'X' where the video should be, Zoneminder is incorrectly detecting that your IE can handle MJPEG streams. To fix, go to '''Options''' then '''High B/W''', '''Medium B/W''', or '''Low B/W''' (depending on which you use) and set the option '''Override the automatic detection of browser streaming capability''' to "no". This will force all browsers to use Cambozola. Also, with modern versions of Java, you'll probably also have to go into your Control Panel to the Java options and add the URL of your Zoneminder instance to your Exception Site List, due to the fact that Cambozola.jar is self-signed. Otherwise you'll get a Java message '''Application Blocked by Security Settings'''

==Capture Card Issues==
==== Image is Flipped ====
* Applies to 4 inputs on one chip:
**http://www.zoneminder.com/forums/viewtopic.php?t=6042

==== Scrambled Images ====
* Applies to 4 inputs on one chip, using lspci and dmesg to determine hardware.
**http://www.zoneminder.com/forums/viewtopic.php?t=6024
**http://www.zoneminder.com/wiki/index.php/Pico2000

==== Black Screen bttv Video Devices ====
* Black Screen in ZM when using 2.6.21.5 kernel '''but''' works with TVTime
** http://www.zoneminder.com/forums/viewtopic.php?t=10108 describes why a V4L2 app has to init the devices 1st before a V4L1 app.
** A script to workaround this is available at http://www.zoneminder.com/forums/viewtopic.php?t=9414

==CAUSE NOTES field section==
*http://www.zoneminder.com/forums/viewtopic.php?t=6065

==Database MySQL==
==== Create a New Database ====
* http://www.zoneminder.com/forums/viewtopic.php?t=5754

==== Repair a Database ====
* http://www.zoneminder.com/forums/viewtopic.php?t=5657
* http://www.zoneminder.com/forums/viewtopic.php?t=5845

==== Backup a Database ====
In Ubuntu and other modern distributions you can install MySQL administrator GUI.

the default login is :- 
Server Hostname ---- localhost Username ---- Root Password ----- (Blank, no password)

In here, there is backup and restore functions. The backup can also be scheduled.

==== Delete Databases/Tables ====

==== Database Tricks/Tips ====

=====MySQL Tune Up=====
For small one or two camera systems with few events the default MySQL settings should work quite well. Hi resolution cameras with lots of activity or monitors on Record or Mocord will run up thousands of events in short order. This will put a strain on MySQL with default settings.
Many Linux distributions provide MySQL 5.5 or older. For these I recommend setting up MySQL to use INNODB tables. Researching the web I found this to be faster for larger tables (as events grow) and much more reliable. to do this:

Edit the MySQL config file (for Ubuntu 14.04 it is /etc/mysql/my.cnf) and add:

[mysqld]

innodb_file_per_table

If you have a running system you can convert to INNODB
*[[Enable and convert MySQL to innodb_file_per_table for Zoneminder]]

One tool I use is mysqltuner. This is run from the command line and gives clear instructions as to what values to change. If these instructions are not clear to you I recommend my friend Google.

On a new system under load we recommend running mysqltuner daily until you get to stability with the amount of events you store.

When you run mysqltuner you will be prompted to enter the admin user (normally root) and then the password.

Many of the settings in MySQL are "default" and are not listed in the configuration file. So, if mysqltuner recommends you change the value for innodb_buffer_pool_size and you open the my.cnf (or other config file) and you do not find the value you will have to add it! Something like this:

[mysqld]

innodb_file_per_table

innodb_buffer_pool_size = 512m (Note that memory values can be also written in bytes)

Stop Zoneminder, restart MySQL, then start Zoneminder to apply changes

Forum topics about MySQL
* http://www.zoneminder.com/forums/viewtopic.php?t=6000
* http://www.zoneminder.com/forums/viewtopic.php?t=6143
* http://www.zoneminder.com/forums/viewtopic.php?t=5657
* http://www.zoneminder.com/forums/viewtopic.php?t=6095

====Update Database After Installing from RPM's====
* http://www.zoneminder.com/forums/viewtopic.php?t=5887

== ffmpeg ==
*Install ffmpeg for Fedora with
yum -i ffmpeg 
yum -i ffmpeg-devel

*Install ffmpeg and ffmpeg-devel on Fedore4
**http://www.zoneminder.com/forums/viewtopic.php?t=5601
<code>
rpm -ivh http://rpm.livna.org/livna-release4.rpm
yum install ffmpeg ffmpeg-devel
</code>
Place the devel stuff in /usr/include/ffmpeg
Now configure, make, make install

*http://www.zoneminder.com/forums/viewtopic.php?t=5576&sid=4e7192b74fe4306e341e9c4036727f7b
*After getting ffmpeg from CVS, do:
<code>./configure , make, make install, make installibs</code>

===Changes in ffmpeg again===
It would seem that ffmpeg has possibly changed things again, no real supprise there but it complicates building ZM.

So if you find when you make:

zm_mpeg.h:29:29: error: ffmpeg/avformat.h: No such file or directory

zm_mpeg.h:31:28: error: ffmpeg/swscale.h: No such file or directory

and whereis turns up:

/usr/include/libavformat/avformat.h

/usr/include/libswscale/swscale.h

The file you would need to change is zm_mpeg.h
and change the following two lines in that file:

#include <ffmpeg/avformat.h>
#include <ffmpeg/swscale.h>

Would have to be canged to:

#include <libavformat/avformat.h>
#include <libswscale/swscale.h>

==Increase Image size==
If you increase the image size on a camera, it's always best to close down any streams and restart ZM to make sure that all memory is released.
http://www.zoneminder.com/forums/viewtopic.php?t=7049

==Image display problems==
http://www.zoneminder.com/forums/viewtopic.php?t=6027

Also remember you may need to increase your 'shared memory'. See the FAQ for details

==Firefox, Colorzilla Extensions==
http://www.zoneminder.com/forums/viewtopic.php?t=5647

==Kodicom Capture Cards==
* http://www.zoneminder.com/forums/viewtopic.php?t=5640
* http://www.zoneminder.com/forums/viewtopic.php?t=4130
* http://www.zoneminder.com/forums/viewtopic.php?t=6158
*KMC-8800 8-chip bt878 capture card
** http://www.zoneminder.com/forums/viewtopic.php?t=5609
** http://www.linuxtv.org/wiki/index.php/Kodicom_4400R
** http://www.linuxtv.org/wiki/index.php/Kodicom_8800R
** http://www.zoneminder.com/forums/viewtopic.php?t=6012

*modprobe.conf file
**http://www.zoneminder.com/forums/viewtopic.php?t=5508&postdays=0&postorder=asc&start=15
** http://www.zoneminder.com/forums/viewtopic.php?t=6024
Edit your /etc/modprobe.conf file and add this line: 
options bttv card=77 
*http://www.linux.com/howtos/Webcam-HOWTO/dev-intro.shtml
*http://www.zoneminder.com/forums/viewtopic.php?t=6892
All screens must be the same resolution.

*bttv settings
**http://www.zoneminder.com/forums/viewtopic.php?t=5603&sid=4e7192b74fe4306e341e9c4036727f7b

note that under ubuntu that the file to edit is /etc/modprobe.d/aliases.

==Logitech USB QuickCam==
*I'm using FC4 and had a similiar problem with a quickcam 4000.
I guess you are using the default module supplied with CentOS. I think, not sure about this though, that it is missing some capabilities. So I installed the pwc module (http://www.saillard.org/linux/pwc/INSTALL.en) and these crashes stopped.
http://www.zoneminder.com/forums/viewtopic.php?t=5906

==Message Logs==
http://www.zoneminder.com/forums/viewtopic.php?t=5771

==Memory Problems/Tweaks==
*http://www.zoneminder.com/forums/viewtopic.php?t=6242
*Shared memory setting must be high.
**http://www.zoneminder.com/forums/viewtopic.php?t=6024

==SELinux Issues==
*http://www.zoneminder.com/forums/viewtopic.php?t=6337
*http://www.zoneminder.com/forums/viewtopic.php?t=4836
*http://www.zoneminder.com/forums/viewtopic.php?t=6147
<code>
cat sysctl.conf
# Disable response to broadcasts.
# You don't want yourself becoming a Smurf amplifier.
net.ipv4.icmp_echo_ignore_broadcasts = 1
# enable route verification on all interfaces
net.ipv4.conf.all.rp_filter = 1
# enable ipV6 forwarding
#net.ipv6.conf.all.forwarding = 1
kernel.shmall = 134217728
kernel.shmmax = 134217728
</code>
* http://www.zoneminder.com/forums/viewtopic.php?t=6000

==Mocord, Record, Modect==
http://www.zoneminder.com/forums/viewtopic.php?t=6120

==External Triggering==
====zmtrigger.pl====
Some discussion on using external events (X10 for example) to trigger your ZM camera:
http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=

(Could use your help here)

==Modprobe==
modprobe.conf
mod = 133 or something like that for Kodicom
http://www.zoneminder.com/forums/viewtopic.php?t=5603

==Official ZoneMinder Manual==
http://www.zoneminder.com/fileadmin/downloads/README.html

==MMS Gateway and API Aoftware==
GPRS or HTTP a Jpeg image to the MMS gateway server which in turn sends the image to a mobile phone
*http://www.redcoal.com/
*http://www.zoneminder.com/forums/viewtopic.php?t=6101
*http://wurfl.sourceforge.net/

==Multiple zones==
http://www.zoneminder.com/forums/viewtopic.php?t=6079

==Perl Package zmpgk.pl==
*http://www.zoneminder.com/forums/viewtopic.php?t=5801

==Roundrobin==
*http://www.zoneminder.com/forums/viewtopic.php?t=5658

==Remote Camera Source/ Using Another ZM Box as a Source====
*http://www.zoneminder.com/forums/viewtopic.php?t=5549
*http://www.zoneminder.com/forums/viewtopic.php?t=5595
*http://www.zoneminder.com/forums/viewtopic.php?t=5549
*http://www.zoneminder.com/forums/viewtopic.php?t=12037

==Simultaneous connections (number off ) to Web browser==
*http://www.zoneminder.com/forums/viewtopic.php?t=6765

==Streaming ==
*rtp and raw streaming
http://www.zoneminder.com/forums/viewtopic.php?t=5572

==Settings==
*"disable farm out writing of images" if frame capture errors appear in log. 
** http://www.zoneminder.com/forums/viewtopic.php?t=5992

*color pallet, video hieght, or video width. Try starting with 320x240 (assuming ntsc) and try different pallets.
**http://www.zoneminder.com/forums/viewtopic.php?t=6027&sid=9a52386394831b24741c67ba70cc1507

==Timelapsed video==
http://www.zoneminder.com/forums/viewtopic.php?t=6049

==Vehicle Detection Links==
*http://www.zoneminder.com/forums/viewtopic.php?t=5858
*http://www.zoneminder.com/forums/viewtopic.php?t=5184&highlight=truck+intersection

*All things are possible and the example someone posted a while back of detecting trucks and buses, but not cars, passing over a distant intersection is probably appropriate for you. What I would suggest you need are quite high pixel differences (indicating difference from the background) and pretty small counts of changed pixels or blob sizes. You might find it useful to turn on diagnostic images initially (and only for a while as they slow everything down a lot) which will output what ZM thinks the differences etc are are in the images.

==Water marked==
http://www.zoneminder.com/forums/viewtopic.php?t=4591&highlight=watermark
http://www.zoneminder.com/forums/viewtopic.php?t=4188&highlight=watermark

==xawtv ==
*http://www.zoneminder.com/forums/viewtopic.php?t=5696
what from xawtv -hwscan?
xawtv -device /dev/video?

==zmc daemon captures the images==
*http://www.zoneminder.com/forums/viewtopic.php?t=6146

==Zone Configurations and Fine Tunings==

The way I tuned my zones was to walk out in front of the camera and stand at the furthest distance from the camera where it would be useful to detect motion.

Then I replayed the footage and took a still of my standing away from the camera, loaded it into a photo editor and cropped the image to the size of my body.

Then looking at the image attibutes gave me the dimensions of the remaining space, I took the height and width and multiplied them to get a minumum number of changed pixels I wanted to cause an alarm.

I went into my zone and changed the units from percent to pixels. Then input the number I got from my previous calculation into the first two min fields, and subtracted 15% and put that number in the last minumum field.

* This section needs alot of work. Please contribute as much as you can!

Once you have Zoneminder up and running and all your cameras recording events, it then becomes important to fine tune your zones so that you record all of the events that are important to you, and just as important, NOT record events that are not important

There are many parameters to be adjusted. So many, in fact, that it is easy to change just a few parameters, and create a config that does not do what you want at all. It is all so confusing. Here, we will attempt to document some basic configs, and explain in some detail the effects that each parameter will have and how each parameter relates to the other parameters.

The Documentation page offers some help in understanding how these parameters are related and important. You can view the online documentation here:

[http://www.zoneminder.com/fileadmin/downloads/README.html#_Toc151468571 Zone Config Documentation]

[[Reference Image Blend Percentage aka Vapor Trails]]

[[Zone Parameter Explanations version 1.21]]

[[Zone Parameter Explanations version 1.22]]

[[Zone Analysis Pseudo Algorithm]]

[[Zone Configuration Basics]]

[[Zone Configuration Advanced]]

[[Special Situation Configs]]

ZoneMinder Wiki - User contributions [en]

General Notes