Axis

2012-12-21T05:41:47Z

Kylejohnson: Added the AXIS Q6032-E

[[Image:Axis cameras.jpg]]

ZoneMinder will work well with just about any [http://www.axis.com Axis camera], including the 205, 206, 207, 209, 210, 211 and M10 ranges. It will also work with the 213 and 2130 cameras and support their [[PTZ]] functions through the web interface.

Please note that early 207's has some hardware issues. See [http://www.zoneminder.com/forums/viewtopic.php?t=5022 this thread] in the forum for details.
Also note that the [http://www.axis.com/techsup/cam_servers/cam_2100/index.htm 2100 has been discontinued by Axis] and no longer supported, possibly due to hardware related problems. It's noted in the [http://www.zoneminder.com/forums/viewtopic.php?t=10079 forums that the camera sends the pictures it captures somewhat diced up.]

How to Offload the Motion to cameras [[AxisMotionDetection]]

Axis publishes their full, open API named VAPIX; documentation may be found at [http://www.axis.com/techsup/cam_servers/dev/index.htm Axis Developer Pages]. Note in particular the HTTP API which defines the remote host path arguments which may be used by Zoneminder.

== AXIS 2110 ==

/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS 207W ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS P33XX-V/VE ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
or
<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS P1311 ==

<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS 213PTZ ==
The axis 213PTZ works perfectly. Use the folowing settings:
'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: 554
Remote Host Path: /mpeg4/media.amp

'''CONTROL'''
Controllable: Yes
Control Type: Axis API v2
Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>

The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the [[FAQ]])

The [[AxisMotionDetection]] trick works quite well with this camera.

The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.

This was tested with zoneminder 1.24.2 running on Gentoo stable

== AXIS M1011-W ==

[http://www.axis.com/products/cam_m1011w/ M1011-W]

I get a lower load by using the MJPEG stream compared to the JPEG still images. [[User:Mathieumd|Mathieumd]] 15:52, 17 May 2012 (BST)

'''General'''
{| border="1"
! Tab/Label
! MJPEG Stream
! JPEG Stills
|-
| colspan="3" | '''General'''
|-
| Source Type
| colspan="2" align="center" | Remote
|-
| Maximum FPS
|
| 5
|-
| Alarm Maximum FPS
|
| 15
|-
| colspan="3" | '''Source'''
|-
| Remote Protocol
| colspan="2" align="center" | HTTP
|-
| Remote Method
| colspan="2" align="center" | Simple
|-
| Remote Host Name
| colspan="2" align="center" | [<USER>:<PASS>@]'''<CAM IP/HOSTNAME>'''
|-
| Remote Host Port
| colspan="2" align="center" | <CAM PORT> (usually 80 or 443)
|-
| Remote Host Path
| /axis-cgi/'''mjpg/video'''.cgi?resolution=640x480&fps=15
| /axis-cgi/'''jpg/image'''.cgi?resolution=640x480
|-
| Capture Width (pixels)
| colspan="2" align="center" | 640
|-
| Capture Height (pixels)
| colspan="2" align="center" | 480
|}

== AXIS M1031-W ==

[http://www.axis.com/products/cam_m1031w/ M1031-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480

OR for mpeg-4

'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP/HTTP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /mpeg4/media.amp

[[Category:Cameras]]

== AXIS M1054 ==

Working just fine with my zoneminder setup under Ubuntu 10.04 and 11.04, using MJPEG setup.

My camera setup:
* Source type: remote
* Function: modect
* maximum fps 8.00
* alarm fps 30.00
* remote protocol: http
* remote method: simple
* remote host name: the DNS name of the camera (or IP adress I suppose)
* remote host port: 80
* remote host path: /axis-cgi/mjpg/video.cgi
* capture width: 1280
* capture height: 800

I just captured some thiefs with this setup, police caught them and used the pictures as proof. High quality pictures for that price of a camera and very reliable (running 1/2 year now without a single crash or disfunction).[http://www.blognesian.com/ ]

==AXIS M1114==
works with following entrys
* Source type: remote
* Function: [what_you_want]
* maximum fps 0 # don't put any value here
* alarm fps 0 # don't put any value here
* remote protocol: http
* remote method: simple
* remote host name: user:password@IP-Address or user:password@DNS_Name
* remote host port: 80
* remote host path: /mjpg/video.mjpg?resolution=480x360
* capture width: 480 #depends on your "remote host path" setting, must to be the same!
* capture height: 360 #depends on your "remote host path" setting, must to be the same!

Using remote host path and arguments from the Axis VAPIX HTTP API. Includes limiting the frame rate (fps=x)

* Remote Protocol: HTTP
* Remote Method: Simple
* Remote Host Name: <user>:<password>@<hostname or IP>
* Remote Host Port: 80
* Remote Host Path: /axis-cgi/mjpg/video.cgi?fps=15&resolution=1024x640
* Remote Image Colours: 24 bit color
* Capture Width (pixels): 1024
* Capture Height (pixels): 640

==AXIS Q6032-E==

* Remote Protocol: HTTP
* Remote Method: Simple
* Remote Host Name: <user>:<password>@<hostname or IP>
* Remote Host Port: 80
* Remote Host Path: /mjpg/video.mjpg
* Remote Image Colours: <24 bit color|32 bit color>
* Capture Width (pixels): 704
* Capture Height (pixels): 480

Vivotek

2009-03-03T15:40:44Z

Kylejohnson:

= < v. 1.24 =
In versions of ZoneMinder prior to 1.24, the only way to use the Vivotek 7131 camera was by streaming the snapshot (which gives you an inconsistent FPS of 1 - 3). Use '''/cgi-bin/video.jpg''' as the '''Remote Host Path''' (Under '''Source''').

= >= v. 1.24 =
Starting with version 1.24 of ZoneMinder, RTSP is supported. As the Vivotek 7131 camera supports RTSP, we can now make full use of this camera.
I have successfully setup a a Vivotek 7131 on an Ubuntu 8.10 Server using RTSP at 640x480, 24-bit color and streaming at 20FPS using RTSP.
I had manually changed the RTSP port in the camera settings to port 7070. This is probably not necessary, and I do not remember the default - so adjust accordingly.
To make this work, use the following settings:

;Remote Protocol : RTSP
;Remote Method : RTP/RTSP
;Remote Host Name : x.x.x.x
;Remote Host Port : 7070
;Remote Host Path : /live.sdp
;Remote Host SubPath : /trackID=
;Remote Image Colours : 24 bit colour
;Capture Width (pixels) : 640
;Capture Height (pixels) : 480

[[Category:Cameras]]

File:Search 3.png

2009-02-02T16:09:37Z

Kylejohnson:

File:Search 2.png

2009-02-02T16:05:27Z

Kylejohnson: Example of a search, showing all matching events.

Example of a search, showing all matching events.

File:Search 1.png

2009-02-02T15:56:02Z

Kylejohnson: Example of searching for an event that happened on 2009/01/31, later than 8:00 AM, earlier than 9:30 PM, and on Camera ID 4

Example of searching for an event that happened on 2009/01/31, later than 8:00 AM, earlier than 9:30 PM, and on Camera ID 4

Ubuntu

2009-01-25T19:22:49Z

Kylejohnson:

Ubuntu is a Linux distribution based on Debian. It's a good system for a home / office user and the install CD installs 'most everything the home / office user will need.

==Installation Guides==
[[Ubuntu 5.10]]

[[Ubuntu 6.06 - Dapper]]

[[Ubuntu 6.06 - Alternate]] (cut-n-paste)

[[Ubuntu 6.10]]

[[Ubuntu 7.04]]

[[Ubuntu 8.04.1]]

[[Ubuntu 8.10]]

==Installation Notes==
http://www.zoneminder.com/forums/viewtopic.php?t=5633
GUI package that installs Mplayer etc.
http://ubuntuforums.org/showpost.php?p=356392
EXTRA_LIBS parameter in .configure script
http://www.zoneminder.com/forums/viewtopic.php?t=6141

==Links==
[http://ubuntulinux.org http://ubuntulinux.org]

[[Categories: Linux distributions]]

Vivotek

2008-10-15T15:29:47Z

Kylejohnson:

The Vivotek 7131 works, though only with snap shots - not mpeg or mjpeg.<br />
Use '''/cgi-bin/video.jpg''' as the '''Remote Host Path''' (Under '''Source''').

[[Category:Cameras]]

ZoneMinder Wiki - User contributions [en]

Axis

Vivotek

File:Search 3.png

File:Search 2.png

File:Search 1.png

Ubuntu

Vivotek