ZoneMinder Wiki - User contributions [en]

Toshiba

2009-03-09T17:32:06Z

Lonewolf:

= IK-WD01A =
Source type: Remote
Remote Host Name: IP Address of Camera
Remote Host Port: 80 (Default) or the non-default port assigned to the camera in your network
Remote Host Path: /video2.mjpg

The camera can be configured to provide two video streams within the camera's configuration web page (http://<camera-ip>/setup/audiovideo.html). The above example connects to stream 2, which is configured on the camera as JPEG mode. Be sure that the frame size indicated on the camera configuration matches that in the ZoneMinder configuration. Frame rate is dependent on ambient lighting conditions, and is typically 20fps for nominal indoor ambient lighting and as high as 40fps outdoors.

= IK-WB02A =
This camera works pretty good once you use Internet Exploder to configure it (lots of ActiveX).
Set '''Remote Host Path''' to '''/Jpeg/CamImg.jpg'''

[[Category:Cameras]]

Trendnet

2009-03-09T17:22:31Z

Lonewolf:

= TV-IP100 =
Trendnet TV-IP100 works ok.
http://x.x.x.x/video.cgi

= TV-IP201P =
The TV-IP201P works ok. Use the following settings:
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass and 192.168.0.30 is the default IP)
Remote Host Port: 80
Remote Host Path: /goform/capture

= TV-IP300 =
Just remember to turn 1.0 in ZM_HTTP_VERSION in the Options > Network tab. In the x.x.x.x/cgi-bin/video.jpg gives 352 x 240 jpg.

= TV-IP301 =
This camera sends the wrong mime/type and is not compatible with ZoneMinder natively but can be made to work.

http://www.zoneminder.com/forums/viewtopic.php?t=7320

= TV-IP400 / TV-IP400W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.

New Driver and instructions for ZM 1.23.x :
http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/

Older Driver and instructions for 1.22.x:
http://www.sfpeter.com/2007/08/14/controlling-the-trendnet-tv-ip400w-camera-with-zoneminder/
The above link is missing the "Move" tab when creating the control. You need to select "Can Move", "Can Move Diagonally" and "Can Move Relative".

[[Category:Cameras]]

Vivotek

2009-03-09T17:08:39Z

Lonewolf:

= IP7131 =
== ZM < v. 1.24 ==
In versions of ZoneMinder prior to 1.24, the only way to use the Vivotek 7131 camera was by streaming the snapshot (which gives you an inconsistent FPS of 1 - 3). Use '''/cgi-bin/video.jpg''' as the '''Remote Host Path''' (Under '''Source''').

== ZM >= v. 1.24 ==
Starting with version 1.24 of ZoneMinder, RTSP is supported. As the Vivotek 7131 camera supports RTSP, we can now make full use of this camera.
I have successfully setup a a Vivotek 7131 on an Ubuntu 8.10 Server using RTSP at 640x480, 24-bit color and streaming at 20FPS using RTSP.
To make this work, use the following settings:

Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: x.x.x.x
Remote Host Port: 554
Remote Host Path: /live.sdp
Remote Host SubPath: /trackID=
Remote Image Colours: 24 bit colour
Capture Width (pixels): 640
Capture Height (pixels): 480

= IP7138 =
== < v. 1.24 ==
In versions of ZoneMinder prior to 1.24, the only way to use the Vivotek 7138 camera was by streaming the snapshot (which gives you an inconsistent FPS of 1 - 3). Use '''/cgi-bin/viewer/video.jpg''' as the '''Remote Host Path''' (Under '''Source''').

[[Category:Cameras]]

Vivotek

2009-03-09T17:03:46Z

Lonewolf:

= IP7131 =
== ZM < v. 1.24 ==
In versions of ZoneMinder prior to 1.24, the only way to use the Vivotek 7131 camera was by streaming the snapshot (which gives you an inconsistent FPS of 1 - 3). Use '''/cgi-bin/video.jpg''' as the '''Remote Host Path''' (Under '''Source''').

== ZM >= v. 1.24 ==
Starting with version 1.24 of ZoneMinder, RTSP is supported. As the Vivotek 7131 camera supports RTSP, we can now make full use of this camera.
I have successfully setup a a Vivotek 7131 on an Ubuntu 8.10 Server using RTSP at 640x480, 24-bit color and streaming at 20FPS using RTSP.
To make this work, use the following settings:

;Remote Protocol : RTSP
;Remote Method : RTP/RTSP
;Remote Host Name : x.x.x.x
;Remote Host Port : 554
;Remote Host Path : /live.sdp
;Remote Host SubPath : /trackID=
;Remote Image Colours : 24 bit colour
;Capture Width (pixels) : 640
;Capture Height (pixels) : 480

= IP7138 =
== < v. 1.24 ==
In versions of ZoneMinder prior to 1.24, the only way to use the Vivotek 7138 camera was by streaming the snapshot (which gives you an inconsistent FPS of 1 - 3). Use '''/cgi-bin/viewer/video.jpg''' as the '''Remote Host Path''' (Under '''Source''').

[[Category:Cameras]]