http://wiki.staging.zoneminder.com/api.php?action=feedcontributions&feedformat=atom&user=LviperZoneMinder Wiki - User contributions [en]2026-04-20T00:03:17ZUser contributionsMediaWiki 1.37.1http://wiki.staging.zoneminder.com/index.php?title=Trendnet&diff=3373Trendnet2009-10-28T18:43:03Z<p>Lviper: </p>
<hr />
<div>= TV-IP100 =<br />
Trendnet TV-IP100 works ok.<br />
http://x.x.x.x/video.cgi<br />
<br />
= TV-IP201P =<br />
The TV-IP201P works ok. Use the following settings:<br />
Remote Protocol: HTTP<br />
Remote Method: Simple<br />
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass and 192.168.0.30 is the default IP)<br />
Remote Host Port: 80<br />
Remote Host Path: /goform/capture<br />
<br />
= TV-IP300 =<br />
Just remember to turn 1.0 in ZM_HTTP_VERSION in the Options > Network tab. In the x.x.x.x/cgi-bin/video.jpg gives 352 x 240 jpg. <br />
<br />
= TV-IP301 =<br />
This camera sends the wrong mime/type and is not compatible with ZoneMinder natively but can be made to work.<br />
<br />
http://www.zoneminder.com/forums/viewtopic.php?t=7320<br />
<br />
= TV-IP400 / TV-IP400W =<br />
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder. <br />
<br />
New Driver and instructions for ZM 1.23.x : <br />
http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/<br />
<br />
Older Driver and instructions for 1.22.x: <br />
http://www.sfpeter.com/2007/08/14/controlling-the-trendnet-tv-ip400w-camera-with-zoneminder/<br />
The above link is missing the "Move" tab when creating the control. You need to select "Can Move", "Can Move Diagonally" and "Can Move Relative".<br />
<br />
= TV-IP501P =<br />
This camera works just like the IP400 without the PTZ contols.<br />
<br />
Remote Protocol: HTTP<br />
Remote Method: Simple<br />
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)<br />
Remote Host Port: 80<br />
Remote Host Path: /MJPEG.CGI<br />
<br />
[[Category:Cameras]]</div>Lviper