ZoneMinder Wiki - User contributions [en]

Trendnet

2012-05-19T09:06:35Z

Mathieumd: /* TV-IP422 */

= TV-IP100 =
Trendnet TV-IP100 works ok.
http://x.x.x.x/video.cgi

= TV-IP100W-N =
great little wireless camera with digital zoom

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

=TV-IP110 & TV-IP110W=

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <username>:<password>@x.x.x.x
Remote host Port: 80
Remote Host Path: /cgi/mjpg/mjpg.cgi
Remote Image Colors: 24 bit color
Capture Width: 640
Capture Height: 480

The capture height and width can be changed using the camera's web interface by modifying the "Video Quality" setting.
VGA = 640 x 480
QVGA = 320 x 240
QQVGA = 160 x 120

= TV-IP201P and TV-IP201W =
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass and 192.168.0.30 is the default IP)
Remote Host Port: 80
Remote Host Path: /goform/capture

= TV-IP252P =
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default)
Remote Host Port: 80
Remote Host Path: cgi/mjpg/mjpg.cgi

= TV-IP300 =
Just remember to turn 1.0 in ZM_HTTP_VERSION in the Options > Network tab. In the x.x.x.x/cgi-bin/video.jpg gives 352 x 240 jpg.

= TV-IP301 =
This camera sends the wrong mime/type and is not compatible with ZoneMinder natively but can be made to work.

http://www.zoneminder.com/forums/viewtopic.php?t=7320

= TV-IP400 / TV-IP400W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.

New Driver and instructions for ZM 1.23.x :
http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/

Older Driver and instructions for 1.22.x:
http://www.sfpeter.com/2007/08/14/controlling-the-trendnet-tv-ip400w-camera-with-zoneminder/
The above link is missing the "Move" tab when creating the control. You need to select "Can Move", "Can Move Diagonally" and "Can Move Relative".

= TV-IP410 and TV-IP410W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.
Look at http://www.dubuque.k12.ia.us/it/zoneminder.html

= TV-IP422 =

[http://trendnet.com/products/proddetail.asp?prod=150_TV-IP422&cat=152 TRENDnet TV-IP422]

Info from [http://thierry-jaouen.fr/dokuwiki/doku.php?id=serveur_zoneminder#tv-ip422 thierry-jaouen.fr] (in French)

JPEG stills streaming seems to be very slow.

'''General'''
{| border="1"
! Tab/Label
! MJPEG Stream
! JPEG Stills
|-
| colspan="3" | '''Source'''
|-
| Remote Host Name
| colspan="2" align="center" | [<USER>:<PASS>@]'''<CAM IP/HOSTNAME>'''
|-
| Remote Host Port
| colspan="2" align="center" | 80
|-
| Remote Host Path
| /cgi/mjpg/mjpg.cgi<br>(not "/mjpeg.cgi" because of its broken MIME type)
| /cgi/jpg/image.cgi
|}

= TV-IP501P =
This camera works just like the IP400 without the PTZ contols.

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

= TV-IP501W =

the Trendnet IP501W works. Here are the settings

Source Type: Remote

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: username:password@IP-address

Remote Host Port: 80

Remote Path: /video.cgi

=TV-IP512P=

[[Image:TV-IP512P.jpg]]

HTTP
Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /video/mjpg.cgi (for mjpeg stream)
Remote Host Path: /image/jpeg.cgi (for a single jpeg frame)

RTSP
Source Type: ffmpeg
Source Path: rtsp://user:pass@<IP Address of Camera>/play1.sdp (or play2.sdp)

ZoneMinder 1.24.2 (Haven't tried earlier versions)

RTSP works with ffmpeg as above pulling 30fps when camera set to 30fps for that Profile.

Alternatively, the monitor can be configured:

Source Type: Remote
Remote Protocol: RTSP
Remote Method: RTP/Unicast
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 554
Remote Host Path: /play1.sdp

When using the above ffmpeg RTSP and camera is set to Night Mode using the 30fps setting fps drop to 15fps in the dark as per the warning that this may happen at low light levels.

=TV-IP512WN=
The TV-IP512WN is pretty much the same device as TV-IP512P. It features an additional WLAN interface and can be used with the same settings as the [[Trendnet#TV-IP512P|TV-IP512P]].

=TV-IP522P=
Warning: even though this is a 'MegaPixel' camera, it has a very wide-angle lens so the image detail isn't very high. Furthermore, replacement 1/2" lenses seem to be hard to find.

ZM configuration is similar to TV-IP512P (above) except the 522 has multiple video profiles, which should be specified as

Remote Host Path: /video/mjpg.cgi?profileid=1

(1, 2, or 3, depending on the desired profile)

Also be sure to set Capture Width and Capture Height appropriately.

MPEG and RTSP were not tested but the camera does support them.[http://www.blognesian.com/ ]

[[Category:Cameras]]
[[Category:Network Cameras]]

Trendnet

2012-05-19T09:06:12Z

Mathieumd: /* TV-IP422 */

= TV-IP100 =
Trendnet TV-IP100 works ok.
http://x.x.x.x/video.cgi

= TV-IP100W-N =
great little wireless camera with digital zoom

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

=TV-IP110 & TV-IP110W=

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <username>:<password>@x.x.x.x
Remote host Port: 80
Remote Host Path: /cgi/mjpg/mjpg.cgi
Remote Image Colors: 24 bit color
Capture Width: 640
Capture Height: 480

The capture height and width can be changed using the camera's web interface by modifying the "Video Quality" setting.
VGA = 640 x 480
QVGA = 320 x 240
QQVGA = 160 x 120

= TV-IP201P and TV-IP201W =
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass and 192.168.0.30 is the default IP)
Remote Host Port: 80
Remote Host Path: /goform/capture

= TV-IP252P =
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default)
Remote Host Port: 80
Remote Host Path: cgi/mjpg/mjpg.cgi

= TV-IP300 =
Just remember to turn 1.0 in ZM_HTTP_VERSION in the Options > Network tab. In the x.x.x.x/cgi-bin/video.jpg gives 352 x 240 jpg.

= TV-IP301 =
This camera sends the wrong mime/type and is not compatible with ZoneMinder natively but can be made to work.

http://www.zoneminder.com/forums/viewtopic.php?t=7320

= TV-IP400 / TV-IP400W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.

New Driver and instructions for ZM 1.23.x :
http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/

Older Driver and instructions for 1.22.x:
http://www.sfpeter.com/2007/08/14/controlling-the-trendnet-tv-ip400w-camera-with-zoneminder/
The above link is missing the "Move" tab when creating the control. You need to select "Can Move", "Can Move Diagonally" and "Can Move Relative".

= TV-IP410 and TV-IP410W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.
Look at http://www.dubuque.k12.ia.us/it/zoneminder.html

= TV-IP422 =

[http://trendnet.com/products/proddetail.asp?prod=150_TV-IP422&cat=152 TRENDnet TV-IP422]

Info from [http://thierry-jaouen.fr/dokuwiki/doku.php?id=serveur_zoneminder#tv-ip422 thierry-jaouen.fr] (in French)

JPEG stills streaming seems to be very slow.

'''General'''
{| border="1"
! Tab/Label
! MJPEG Stream
! JPEG Stills
|-
| colspan="3" | '''Source'''
|-
| Remote Host Name
| colspan="2" align="center" | [<USER>:<PASS>@]'''<CAM IP/HOSTNAME>'''
|-
| Remote Host Port
| colspan="2" align="center" | 80
|-
| Remote Host Path
| /cgi/mjpg/mjpg.cgi<br>(not "mjpeg.cgi" because of its broken MIME type)
| /cgi/jpg/image.cgi
|}

= TV-IP501P =
This camera works just like the IP400 without the PTZ contols.

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

= TV-IP501W =

the Trendnet IP501W works. Here are the settings

Source Type: Remote

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: username:password@IP-address

Remote Host Port: 80

Remote Path: /video.cgi

=TV-IP512P=

[[Image:TV-IP512P.jpg]]

HTTP
Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /video/mjpg.cgi (for mjpeg stream)
Remote Host Path: /image/jpeg.cgi (for a single jpeg frame)

RTSP
Source Type: ffmpeg
Source Path: rtsp://user:pass@<IP Address of Camera>/play1.sdp (or play2.sdp)

ZoneMinder 1.24.2 (Haven't tried earlier versions)

RTSP works with ffmpeg as above pulling 30fps when camera set to 30fps for that Profile.

Alternatively, the monitor can be configured:

Source Type: Remote
Remote Protocol: RTSP
Remote Method: RTP/Unicast
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 554
Remote Host Path: /play1.sdp

When using the above ffmpeg RTSP and camera is set to Night Mode using the 30fps setting fps drop to 15fps in the dark as per the warning that this may happen at low light levels.

=TV-IP512WN=
The TV-IP512WN is pretty much the same device as TV-IP512P. It features an additional WLAN interface and can be used with the same settings as the [[Trendnet#TV-IP512P|TV-IP512P]].

=TV-IP522P=
Warning: even though this is a 'MegaPixel' camera, it has a very wide-angle lens so the image detail isn't very high. Furthermore, replacement 1/2" lenses seem to be hard to find.

ZM configuration is similar to TV-IP512P (above) except the 522 has multiple video profiles, which should be specified as

Remote Host Path: /video/mjpg.cgi?profileid=1

(1, 2, or 3, depending on the desired profile)

Also be sure to set Capture Width and Capture Height appropriately.

MPEG and RTSP were not tested but the camera does support them.[http://www.blognesian.com/ ]

[[Category:Cameras]]
[[Category:Network Cameras]]

Trendnet

2012-05-19T09:04:24Z

Mathieumd: Added TV-IP422

= TV-IP100 =
Trendnet TV-IP100 works ok.
http://x.x.x.x/video.cgi

= TV-IP100W-N =
great little wireless camera with digital zoom

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

=TV-IP110 & TV-IP110W=

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <username>:<password>@x.x.x.x
Remote host Port: 80
Remote Host Path: /cgi/mjpg/mjpg.cgi
Remote Image Colors: 24 bit color
Capture Width: 640
Capture Height: 480

The capture height and width can be changed using the camera's web interface by modifying the "Video Quality" setting.
VGA = 640 x 480
QVGA = 320 x 240
QQVGA = 160 x 120

= TV-IP201P and TV-IP201W =
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass and 192.168.0.30 is the default IP)
Remote Host Port: 80
Remote Host Path: /goform/capture

= TV-IP252P =
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default)
Remote Host Port: 80
Remote Host Path: cgi/mjpg/mjpg.cgi

= TV-IP300 =
Just remember to turn 1.0 in ZM_HTTP_VERSION in the Options > Network tab. In the x.x.x.x/cgi-bin/video.jpg gives 352 x 240 jpg.

= TV-IP301 =
This camera sends the wrong mime/type and is not compatible with ZoneMinder natively but can be made to work.

http://www.zoneminder.com/forums/viewtopic.php?t=7320

= TV-IP400 / TV-IP400W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.

New Driver and instructions for ZM 1.23.x :
http://www.sfpeter.com/2008/07/31/new-trendnet-tv-ip400w-controller-for-zoneminder-123x/

Older Driver and instructions for 1.22.x:
http://www.sfpeter.com/2007/08/14/controlling-the-trendnet-tv-ip400w-camera-with-zoneminder/
The above link is missing the "Move" tab when creating the control. You need to select "Can Move", "Can Move Diagonally" and "Can Move Relative".

= TV-IP410 and TV-IP410W =
These are cheap but fun Pan Tilt Zoom IP cameras and are now also supported by ZoneMinder.
Look at http://www.dubuque.k12.ia.us/it/zoneminder.html

= TV-IP422 =

Info from [http://thierry-jaouen.fr/dokuwiki/doku.php?id=serveur_zoneminder#tv-ip422 thierry-jaouen.fr] (in French)

JPEG stills streaming seems to be very slow.

'''General'''
{| border="1"
! Tab/Label
! MJPEG Stream
! JPEG Stills
|-
| colspan="3" | '''Source'''
|-
| Remote Host Name
| colspan="2" align="center" | [<USER>:<PASS>@]'''<CAM IP/HOSTNAME>'''
|-
| Remote Host Port
| colspan="2" align="center" | 80
|-
| Remote Host Path
| /cgi/mjpg/mjpg.cgi<br>(not "mjpeg.cgi" because of its broken MIME type)
| /cgi/jpg/image.cgi
|}

= TV-IP501P =
This camera works just like the IP400 without the PTZ contols.

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: user:pass@x.x.x.x (admin:admin is the default user/pass)
Remote Host Port: 80
Remote Host Path: /MJPEG.CGI

= TV-IP501W =

the Trendnet IP501W works. Here are the settings

Source Type: Remote

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: username:password@IP-address

Remote Host Port: 80

Remote Path: /video.cgi

=TV-IP512P=

[[Image:TV-IP512P.jpg]]

HTTP
Source Type: Remote
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 80 (Default)
Remote Host Path: /video/mjpg.cgi (for mjpeg stream)
Remote Host Path: /image/jpeg.cgi (for a single jpeg frame)

RTSP
Source Type: ffmpeg
Source Path: rtsp://user:pass@<IP Address of Camera>/play1.sdp (or play2.sdp)

ZoneMinder 1.24.2 (Haven't tried earlier versions)

RTSP works with ffmpeg as above pulling 30fps when camera set to 30fps for that Profile.

Alternatively, the monitor can be configured:

Source Type: Remote
Remote Protocol: RTSP
Remote Method: RTP/Unicast
Remote Host Name: user:pass@<IP Address of Camera>
Remote Host Port: 554
Remote Host Path: /play1.sdp

When using the above ffmpeg RTSP and camera is set to Night Mode using the 30fps setting fps drop to 15fps in the dark as per the warning that this may happen at low light levels.

=TV-IP512WN=
The TV-IP512WN is pretty much the same device as TV-IP512P. It features an additional WLAN interface and can be used with the same settings as the [[Trendnet#TV-IP512P|TV-IP512P]].

=TV-IP522P=
Warning: even though this is a 'MegaPixel' camera, it has a very wide-angle lens so the image detail isn't very high. Furthermore, replacement 1/2" lenses seem to be hard to find.

ZM configuration is similar to TV-IP512P (above) except the 522 has multiple video profiles, which should be specified as

Remote Host Path: /video/mjpg.cgi?profileid=1

(1, 2, or 3, depending on the desired profile)

Also be sure to set Capture Width and Capture Height appropriately.

MPEG and RTSP were not tested but the camera does support them.[http://www.blognesian.com/ ]

[[Category:Cameras]]
[[Category:Network Cameras]]

Axis

2012-05-17T14:52:08Z

Mathieumd: /* AXIS M1011-W */

[[Image:Axis cameras.jpg]]

ZoneMinder will work well with just about any [http://www.axis.com Axis camera], including the 205, 206, 207, 209, 210, 211 and M10 ranges. It will also work with the 213 and 2130 cameras and support their [[PTZ]] functions through the web interface.

Please note that early 207's has some hardware issues. See [http://www.zoneminder.com/forums/viewtopic.php?t=5022 this thread] in the forum for details.
Also note that the [http://www.axis.com/techsup/cam_servers/cam_2100/index.htm 2100 has been discontinued by Axis] and no longer supported, possibly due to hardware related problems. It's noted in the [http://www.zoneminder.com/forums/viewtopic.php?t=10079 forums that the camera sends the pictures it captures somewhat diced up.]

How to Offload the Motion to cameras [[AxisMotionDetection]]

Axis publishes their full, open API named VAPIX; documentation may be found at [http://www.axis.com/techsup/cam_servers/dev/index.htm Axis Developer Pages]. Note in particular the HTTP API which defines the remote host path arguments which may be used by Zoneminder.

== AXIS 2110 ==

/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS 207W ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS P33XX-V/VE ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
or
<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS P1311 ==

<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS 213PTZ ==
The axis 213PTZ works perfectly. Use the folowing settings:
'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: 554
Remote Host Path: /mpeg4/media.amp

'''CONTROL'''
Controllable: Yes
Control Type: Axis API v2
Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>

The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the [[FAQ]])

The [[AxisMotionDetection]] trick works quite well with this camera.

The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.

This was tested with zoneminder 1.24.2 running on Gentoo stable

== AXIS M1011-W ==

[http://www.axis.com/products/cam_m1011w/ M1011-W]

I get a lower load by using the MJPEG stream compared to the JPEG still images. [[User:Mathieumd|Mathieumd]] 15:52, 17 May 2012 (BST)

'''General'''
{| border="1"
! Tab/Label
! MJPEG Stream
! JPEG Stills
|-
| colspan="3" | '''General'''
|-
| Source Type
| colspan="2" align="center" | Remote
|-
| Maximum FPS
|
| 5
|-
| Alarm Maximum FPS
|
| 15
|-
| colspan="3" | '''Source'''
|-
| Remote Protocol
| colspan="2" align="center" | HTTP
|-
| Remote Method
| colspan="2" align="center" | Simple
|-
| Remote Host Name
| colspan="2" align="center" | [<USER>:<PASS>@]'''<CAM IP/HOSTNAME>'''
|-
| Remote Host Port
| colspan="2" align="center" | <CAM PORT> (usually 80 or 443)
|-
| Remote Host Path
| /axis-cgi/'''mjpg/video'''.cgi?resolution=640x480&fps=15
| /axis-cgi/'''jpg/image'''.cgi?resolution=640x480
|-
| Capture Width (pixels)
| colspan="2" align="center" | 640
|-
| Capture Height (pixels)
| colspan="2" align="center" | 480
|}

== AXIS M1031-W ==

[http://www.axis.com/products/cam_m1031w/ M1031-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480

OR for mpeg-4

'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP/HTTP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /mpeg4/media.amp

[[Category:Cameras]]

== AXIS M1054 ==

Working just fine with my zoneminder setup under Ubuntu 10.04 and 11.04, using MJPEG setup.

My camera setup:
* Source type: remote
* Function: modect
* maximum fps 8.00
* alarm fps 30.00
* remote protocol: http
* remote method: simple
* remote host name: the DNS name of the camera (or IP adress I suppose)
* remote host port: 80
* remote host path: /axis-cgi/mjpg/video.cgi
* capture width: 1280
* capture height: 800

I just captured some thiefs with this setup, police caught them and used the pictures as proof. High quality pictures for that price of a camera and very reliable (running 1/2 year now without a single crash or disfunction).[http://www.blognesian.com/ ]

==AXIS M1114==
works with following entrys
* Source type: remote
* Function: [what_you_want]
* maximum fps 0 # don't put any value here
* alarm fps 0 # don't put any value here
* remote protocol: http
* remote method: simple
* remote host name: user:password@IP-Address or user:password@DNS_Name
* remote host port: 80
* remote host path: /mjpg/video.mjpg?resolution=480x360
* capture width: 480 #depends on your "remote host path" setting, must to be the same!
* capture height: 360 #depends on your "remote host path" setting, must to be the same!

Using remote host path and arguments from the Axis VAPIX HTTP API. Includes limiting the frame rate (fps=x)

* Remote Protocol: HTTP
* Remote Method: Simple
* Remote Host Name: <user>:<password>@<hostname or IP>
* Remote Host Port: 80
* Remote Host Path: /axis-cgi/mjpg/video.cgi?fps=15&resolution=1024x640
* Remote Image Colours: 24 bit color
* Capture Width (pixels): 1024
* Capture Height (pixels): 640

Axis

2012-05-17T13:45:49Z

Mathieumd: /* AXIS M1011-W */

[[Image:Axis cameras.jpg]]

ZoneMinder will work well with just about any [http://www.axis.com Axis camera], including the 205, 206, 207, 209, 210, 211 and M10 ranges. It will also work with the 213 and 2130 cameras and support their [[PTZ]] functions through the web interface.

Please note that early 207's has some hardware issues. See [http://www.zoneminder.com/forums/viewtopic.php?t=5022 this thread] in the forum for details.
Also note that the [http://www.axis.com/techsup/cam_servers/cam_2100/index.htm 2100 has been discontinued by Axis] and no longer supported, possibly due to hardware related problems. It's noted in the [http://www.zoneminder.com/forums/viewtopic.php?t=10079 forums that the camera sends the pictures it captures somewhat diced up.]

How to Offload the Motion to cameras [[AxisMotionDetection]]

Axis publishes their full, open API named VAPIX; documentation may be found at [http://www.axis.com/techsup/cam_servers/dev/index.htm Axis Developer Pages]. Note in particular the HTTP API which defines the remote host path arguments which may be used by Zoneminder.

== AXIS 2110 ==

/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS 207W ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS P33XX-V/VE ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
or
<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS P1311 ==

<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS 213PTZ ==
The axis 213PTZ works perfectly. Use the folowing settings:
'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: 554
Remote Host Path: /mpeg4/media.amp

'''CONTROL'''
Controllable: Yes
Control Type: Axis API v2
Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>

The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the [[FAQ]])

The [[AxisMotionDetection]] trick works quite well with this camera.

The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.

This was tested with zoneminder 1.24.2 running on Gentoo stable

== AXIS M1011-W ==

[http://www.axis.com/products/cam_m1011w/ M1011-W]

'''General'''
{| border="1"
| Source Type
| '''Remote'''
|-
| Maximum FPS
| 5
|-
| Alarm Maximum FPS
| 15
|}

'''Source'''
{| border="1"
| Remote Protocol
| '''HTTP'''
|-
| Remote Method
| '''Simple'''
|-
| Remote Host Name
| [<USER>:<PASS>@]'''<CAM IP/HOSTNAME>'''
|-
| Remote Host Port
| '''<CAM PORT>''' (usually 80 or 443)
|-
| Remote Host Path
| '''/axis-cgi/mjpg/video.cgi'''?resolution=640x480&fps=15
|-
| Capture Width (pixels)
| 640
|-
| Capture Height (pixels)
| 480
|}

== AXIS M1031-W ==

[http://www.axis.com/products/cam_m1031w/ M1031-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480

OR for mpeg-4

'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP/HTTP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /mpeg4/media.amp

[[Category:Cameras]]

== AXIS M1054 ==

Working just fine with my zoneminder setup under Ubuntu 10.04 and 11.04, using MJPEG setup.

My camera setup:
* Source type: remote
* Function: modect
* maximum fps 8.00
* alarm fps 30.00
* remote protocol: http
* remote method: simple
* remote host name: the DNS name of the camera (or IP adress I suppose)
* remote host port: 80
* remote host path: /axis-cgi/mjpg/video.cgi
* capture width: 1280
* capture height: 800

I just captured some thiefs with this setup, police caught them and used the pictures as proof. High quality pictures for that price of a camera and very reliable (running 1/2 year now without a single crash or disfunction).[http://www.blognesian.com/ ]

==AXIS M1114==
works with following entrys
* Source type: remote
* Function: [what_you_want]
* maximum fps 0 # don't put any value here
* alarm fps 0 # don't put any value here
* remote protocol: http
* remote method: simple
* remote host name: user:password@IP-Address or user:password@DNS_Name
* remote host port: 80
* remote host path: /mjpg/video.mjpg?resolution=480x360
* capture width: 480 #depends on your "remote host path" setting, must to be the same!
* capture height: 360 #depends on your "remote host path" setting, must to be the same!

Using remote host path and arguments from the Axis VAPIX HTTP API. Includes limiting the frame rate (fps=x)

* Remote Protocol: HTTP
* Remote Method: Simple
* Remote Host Name: <user>:<password>@<hostname or IP>
* Remote Host Port: 80
* Remote Host Path: /axis-cgi/mjpg/video.cgi?fps=15&resolution=1024x640
* Remote Image Colours: 24 bit color
* Capture Width (pixels): 1024
* Capture Height (pixels): 640

Axis

2012-05-17T12:53:35Z

Mathieumd: /* AXIS M1011-W */

[[Image:Axis cameras.jpg]]

ZoneMinder will work well with just about any [http://www.axis.com Axis camera], including the 205, 206, 207, 209, 210, 211 and M10 ranges. It will also work with the 213 and 2130 cameras and support their [[PTZ]] functions through the web interface.

Please note that early 207's has some hardware issues. See [http://www.zoneminder.com/forums/viewtopic.php?t=5022 this thread] in the forum for details.
Also note that the [http://www.axis.com/techsup/cam_servers/cam_2100/index.htm 2100 has been discontinued by Axis] and no longer supported, possibly due to hardware related problems. It's noted in the [http://www.zoneminder.com/forums/viewtopic.php?t=10079 forums that the camera sends the pictures it captures somewhat diced up.]

How to Offload the Motion to cameras [[AxisMotionDetection]]

Axis publishes their full, open API named VAPIX; documentation may be found at [http://www.axis.com/techsup/cam_servers/dev/index.htm Axis Developer Pages]. Note in particular the HTTP API which defines the remote host path arguments which may be used by Zoneminder.

== AXIS 2110 ==

/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS 207W ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS P33XX-V/VE ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
or
<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS P1311 ==

<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS 213PTZ ==
The axis 213PTZ works perfectly. Use the folowing settings:
'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: 554
Remote Host Path: /mpeg4/media.amp

'''CONTROL'''
Controllable: Yes
Control Type: Axis API v2
Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>

The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the [[FAQ]])

The [[AxisMotionDetection]] trick works quite well with this camera.

The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.

This was tested with zoneminder 1.24.2 running on Gentoo stable

== AXIS M1011-W ==

[http://www.axis.com/products/cam_m1011w/ M1011-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: [<USER>:<PASS>@]<CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480&fps=15&compression=70&rotation=0
Capture Width (pixels): 640
Capture Height (pixels): 480

== AXIS M1031-W ==

[http://www.axis.com/products/cam_m1031w/ M1031-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480

OR for mpeg-4

'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP/HTTP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /mpeg4/media.amp

[[Category:Cameras]]

== AXIS M1054 ==

Working just fine with my zoneminder setup under Ubuntu 10.04 and 11.04, using MJPEG setup.

My camera setup:
* Source type: remote
* Function: modect
* maximum fps 8.00
* alarm fps 30.00
* remote protocol: http
* remote method: simple
* remote host name: the DNS name of the camera (or IP adress I suppose)
* remote host port: 80
* remote host path: /axis-cgi/mjpg/video.cgi
* capture width: 1280
* capture height: 800

I just captured some thiefs with this setup, police caught them and used the pictures as proof. High quality pictures for that price of a camera and very reliable (running 1/2 year now without a single crash or disfunction).[http://www.blognesian.com/ ]

==AXIS M1114==
works with following entrys
* Source type: remote
* Function: [what_you_want]
* maximum fps 0 # don't put any value here
* alarm fps 0 # don't put any value here
* remote protocol: http
* remote method: simple
* remote host name: user:password@IP-Address or user:password@DNS_Name
* remote host port: 80
* remote host path: /mjpg/video.mjpg?resolution=480x360
* capture width: 480 #depends on your "remote host path" setting, must to be the same!
* capture height: 360 #depends on your "remote host path" setting, must to be the same!

Using remote host path and arguments from the Axis VAPIX HTTP API. Includes limiting the frame rate (fps=x)

* Remote Protocol: HTTP
* Remote Method: Simple
* Remote Host Name: <user>:<password>@<hostname or IP>
* Remote Host Port: 80
* Remote Host Path: /axis-cgi/mjpg/video.cgi?fps=15&resolution=1024x640
* Remote Image Colours: 24 bit color
* Capture Width (pixels): 1024
* Capture Height (pixels): 640

Axis

2012-05-17T10:41:42Z

Mathieumd: Added AXIS M1011-W

[[Image:Axis cameras.jpg]]

ZoneMinder will work well with just about any [http://www.axis.com Axis camera], including the 205, 206, 207, 209, 210, 211 and M10 ranges. It will also work with the 213 and 2130 cameras and support their [[PTZ]] functions through the web interface.

Please note that early 207's has some hardware issues. See [http://www.zoneminder.com/forums/viewtopic.php?t=5022 this thread] in the forum for details.
Also note that the [http://www.axis.com/techsup/cam_servers/cam_2100/index.htm 2100 has been discontinued by Axis] and no longer supported, possibly due to hardware related problems. It's noted in the [http://www.zoneminder.com/forums/viewtopic.php?t=10079 forums that the camera sends the pictures it captures somewhat diced up.]

How to Offload the Motion to cameras [[AxisMotionDetection]]

Axis publishes their full, open API named VAPIX; documentation may be found at [http://www.axis.com/techsup/cam_servers/dev/index.htm Axis Developer Pages]. Note in particular the HTTP API which defines the remote host path arguments which may be used by Zoneminder.

== AXIS 2110 ==

/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS 207W ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240

== AXIS P33XX-V/VE ==

<User>:<Password>@<IP Address>/axis-cgi/mjpg/video.cgi?camera=&resolution=320×240
or
<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS P1311 ==

<User>:<Password>@<IP Address>/mjpg/video.mjpg

== AXIS 213PTZ ==
The axis 213PTZ works perfectly. Use the folowing settings:
'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: 554
Remote Host Path: /mpeg4/media.amp

'''CONTROL'''
Controllable: Yes
Control Type: Axis API v2
Control Address: <USER>:<PASS>@<CAM IP/HOSTNAME>

The resolution must match the one especified in the camera settings. Resolutions up to CIF will work without any problems but 2CIF and 4CIF will need the shared memory tweak (lean more at the [[FAQ]])

The [[AxisMotionDetection]] trick works quite well with this camera.

The Max FPS option of zoneminder introduces very big latency, so I use the option of the camera for limiting the FPS.

This was tested with zoneminder 1.24.2 running on Gentoo stable

== AXIS M1011-W ==

[http://www.axis.com/products/cam_m1011w/ M1011-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: [<USER>:<PASS>@]<CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480
Capture Width (pixels): 640
Capture Height (pixels): 480

== AXIS M1031-W ==

[http://www.axis.com/products/cam_m1031w/ M1031-W]

'''SOURCE'''
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: <CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /axis-cgi/mjpg/video.cgi?resolution=640x480

OR for mpeg-4

'''SOURCE'''
Remote Protocol: RTSP
Remote Method: RTP/RTSP/HTTP
Remote Host Name: <USER>:<PASS>@<CAM IP/HOSTNAME>
Remote Host Port: <CAM PORT>
Remote Host Path: /mpeg4/media.amp

[[Category:Cameras]]

== AXIS M1054 ==

Working just fine with my zoneminder setup under Ubuntu 10.04 and 11.04, using MJPEG setup.

My camera setup:
* Source type: remote
* Function: modect
* maximum fps 8.00
* alarm fps 30.00
* remote protocol: http
* remote method: simple
* remote host name: the DNS name of the camera (or IP adress I suppose)
* remote host port: 80
* remote host path: /axis-cgi/mjpg/video.cgi
* capture width: 1280
* capture height: 800

I just captured some thiefs with this setup, police caught them and used the pictures as proof. High quality pictures for that price of a camera and very reliable (running 1/2 year now without a single crash or disfunction).[http://www.blognesian.com/ ]

==AXIS M1114==
works with following entrys
* Source type: remote
* Function: [what_you_want]
* maximum fps 0 # don't put any value here
* alarm fps 0 # don't put any value here
* remote protocol: http
* remote method: simple
* remote host name: user:password@IP-Address or user:password@DNS_Name
* remote host port: 80
* remote host path: /mjpg/video.mjpg?resolution=480x360
* capture width: 480 #depends on your "remote host path" setting, must to be the same!
* capture height: 360 #depends on your "remote host path" setting, must to be the same!

Using remote host path and arguments from the Axis VAPIX HTTP API. Includes limiting the frame rate (fps=x)

* Remote Protocol: HTTP
* Remote Method: Simple
* Remote Host Name: <user>:<password>@<hostname or IP>
* Remote Host Port: 80
* Remote Host Path: /axis-cgi/mjpg/video.cgi?fps=15&resolution=1024x640
* Remote Image Colours: 24 bit color
* Capture Width (pixels): 1024
* Capture Height (pixels): 640