http://wiki.staging.zoneminder.com/api.php?action=feedcontributions&feedformat=atom&user=MrEvoManZoneMinder Wiki - User contributions [en]2026-04-20T01:36:16ZUser contributionsMediaWiki 1.37.1http://wiki.staging.zoneminder.com/index.php?title=Airlink_101&diff=4204Airlink 1012010-11-22T15:12:02Z<p>MrEvoMan: /* AIC250W */</p>
<hr />
<div>== AIC250W ==<br />
<br />
Airlink101 AIC250 settings for 2 fps as JPG stream: to use this camera with Zoneminder with JPG stream, use these settings for the Monitor: "hostname = <ip of camera>", "path = /image.jpg", use these settings for Options: "ffmpeg" as encoder, "jpg" stream and not mpeg. Select the right resolution for the camera, such as 640x480. To set the resolution for the camera, use a web browser and go to the configuration pages http://<ip of camera>. While in the configuration pages, delete the username and password to get the camera to work with these settings. Save the camera configuration.<br />
<br />
AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200<br />
<br />
== AICN747/AICN747W (Airlink101 SkyIPCam 747W) ==<br />
<br />
Same Camera as Fitivision CS-130A/CS-131A and TrendNet TV-IP410/TV-IP410W. The 'W'/CS-131A version is wireless. Note: the Trendnet cameras have no built-in IR illumination. <br />
<br />
The device requires authentication, so you need to provide the Remote Host Name parameter with <br />
hostname = <username>:<password>@<ip of camera><br />
path = /cgi/jpg/image.cgi for JPEG stills, or /cgi/mjpg/mjpg.cgi for MJPEG (MJPEG mode requires firmware v1.0.0-24 or later)<br />
<br />
<br />
Remote Protocol: HTTP<br />
<br />
Remote Method: Simple<br />
<br />
Remote Host Name: <username>:<password>@<ip of camera><br />
<br />
Remote Host Port: 80<br />
<br />
Remote Host Path: /cgi/mjpg/mjpg.cgi<br />
<br />
Remote Image colors: 24 bit<br />
<br />
Capture Width: 640<br />
<br />
Capture Height: 480 <br />
*[http://www.zoneminder.com/forums/viewtopic.php?t=12271 SkyIPCam 7xx PTZ module for ZM and example audio push/dump scripts]<br />
*[http://www.zoneminder.com/forums/viewtopic.php?t=12238 Additional info on the AirLink SkyIPCam 747W]<br />
<br />
<br />
== Airlink Skyipcam777w ==<br />
<br />
Remote Protocol: HTTP<br />
<br />
Remote Method: Simple<br />
<br />
Remote Host Name: {username}:{password}@{camera ip}<br />
<br />
Remote Host Port: 80<br />
<br />
Remote Host Path: /cgi/mjpg/mjpg.cgi<br />
<br />
Remote Image colors: 24 bit<br />
<br />
Capture Width: 640<br />
<br />
Capture Height: 480<br />
<br />
<br />
*[http://www.zoneminder.com/forums/viewtopic.php?t=14094 Additional info on the 777W]<br />
<br />
<br />
[[Category:Cameras]]</div>MrEvoMan