http://wiki.staging.zoneminder.com/api.php?action=feedcontributions&feedformat=atom&user=Netstar98 2026-05-03T13:40:17Z User contributions MediaWiki 1.37.1 http://wiki.staging.zoneminder.com/index.php?title=Swann&diff=17841 2025-12-16T02:25:04Z

<p>Netstar98: /* SWIFI-SPOTCAM 1080P IP WIFI/Ethernet */</p> <hr /> <div><br /> Have been able to get the following model working:<br /> <br /> == SWNHD-806CAM 720P IP POE ==<br /> <br /> With the help of: [http://sourceforge.net/projects/onvifdm/ Onvif Device Manager] found the correct port and path to camera feed as follows:<br /> <br /> rtsp://&lt;ip path to camera&gt;:554/h264Preview_01_main<br /> <br /> Tested this in VLC and was able to connect to the stream. Therefore used the following setting in Zoneminder camera setup:<br /> <br /> Source Type: Libvlc<br /> <br /> Max FPS 40<br /> <br /> Source Path: rtsp://&lt;ip path to camera&gt;:554/h264Preview_01_main<br /> <br /> Remote Method: RTP/Multicast<br /> <br /> Options: none<br /> <br /> Target Colorspace: 24 bit colour<br /> <br /> Capture Width (pixels): 1280<br /> <br /> Capture Height (pixels): 720<br /> <br /> Preserve Aspect Ratio: (not selected)<br /> <br /> As yet, haven&#039;t ramped up the security settings on this or tweaked any of the Zoneminder settings and not sure if the Morecord feature works, but Record definitely does! --[[User:Jakestrat|Jakestrat]] ([[User talk:Jakestrat|talk]])<br /> <br /> <br /> == SWIFI-SPOTCAM 1080P IP WIFI/Ethernet ==<br /> <br /> A permanent-power standalone 1080P 2.4Ghz Wifi/Ethernet camera with audio. Contrary to Swann&#039;s specifications, it is entirely possible to record audio with these cameras as part of the stream.<br /> <br /> Cameradar was used to brute-force the rtsp parameters.<br /> <br /> Using ffmpeg to encode it is possible to record the stream from either wifi or the optional ethernet port.<br /> <br /> Overlay date/time and &quot;camera name&quot; are embedded in stream.<br /> <br /> <br /> Stream was recorded with the following parameters:<br /> <br /> Camera connection path: &quot;rtsp://:@&lt;ip_path_to_camera&gt;:554//&quot;<br /> <br /> Codec: H264<br /> <br /> Resolution: 1920x1080<br /> <br /> Max FPS: ~14-15<br /> <br /> Color Space: Rec. 709 in daylight (monochrome IR night vision)<br /> <br /> Audio Sample Rate: 8khz<br /> <br /> Audio Bits per sample: 32<br /> <br /> <br /> <br /> Attempting to use VLC to monitor RTSP stream causes camera to power-cycle for some unknown reason?<br /> <br /> No authentication required and several other network ports open - consider air-gapping your setup with these cameras.<br /> <br /> Have not yet integrated into Zoneminder setup, so results may vary.<br /> <br /> <br /> <br /> --[[User:netstar98|netstar98]]<br /> <br /> == Links ==<br /> <br /> [http://ipcamlive.com/faqs How do I get my camera connected to IPCamLive?]<br /> <br /> <br /> [http://swann.com/downloads/New_FTP/Name/Public_Software_Archives/Swannview_Link/ Swann&#039;s Own viewing software]<br /> NB Swann&#039;s viewing software is designed for their bespoke system.</div>

Netstar98 http://wiki.staging.zoneminder.com/index.php?title=Swann&diff=17840 2025-12-16T02:24:21Z

<p>Netstar98: /* SWNHD-806CAM 720P IP POE */</p> <hr /> <div><br /> Have been able to get the following model working:<br /> <br /> == SWNHD-806CAM 720P IP POE ==<br /> <br /> With the help of: [http://sourceforge.net/projects/onvifdm/ Onvif Device Manager] found the correct port and path to camera feed as follows:<br /> <br /> rtsp://&lt;ip path to camera&gt;:554/h264Preview_01_main<br /> <br /> Tested this in VLC and was able to connect to the stream. Therefore used the following setting in Zoneminder camera setup:<br /> <br /> Source Type: Libvlc<br /> <br /> Max FPS 40<br /> <br /> Source Path: rtsp://&lt;ip path to camera&gt;:554/h264Preview_01_main<br /> <br /> Remote Method: RTP/Multicast<br /> <br /> Options: none<br /> <br /> Target Colorspace: 24 bit colour<br /> <br /> Capture Width (pixels): 1280<br /> <br /> Capture Height (pixels): 720<br /> <br /> Preserve Aspect Ratio: (not selected)<br /> <br /> As yet, haven&#039;t ramped up the security settings on this or tweaked any of the Zoneminder settings and not sure if the Morecord feature works, but Record definitely does! --[[User:Jakestrat|Jakestrat]] ([[User talk:Jakestrat|talk]])<br /> <br /> <br /> == SWIFI-SPOTCAM 1080P IP WIFI/Ethernet ==<br /> <br /> A permanent-power standalone 1080P 2.4Ghz Wifi/Ethernet camera with audio. Contrary to Swann&#039;s specifications, it is entirely possible to record audio with these cameras as part of the stream.<br /> <br /> Cameradar was used to brute-force the rtsp parameters.<br /> <br /> Using ffmpeg to encode it is possible to record the stream from either wifi or the optional ethernet port.<br /> <br /> Overlay date/time and &quot;camera name&quot; are embedded in stream.<br /> <br /> <br /> <br /> Attempting to use VLC to monitor RTSP stream causes camera to power-cycle for some unknown reason?<br /> <br /> No authentication required and several other network ports open - consider air-gapping your setup with these cameras.<br /> <br /> Have not yet integrated into Zoneminder setup, so results may vary.<br /> <br /> <br /> Stream was recorded with the following parameters:<br /> <br /> Camera connection path: &quot;rtsp://:@&lt;ip_path_to_camera&gt;:554//&quot;<br /> <br /> Codec: H264<br /> <br /> Resolution: 1920x1080<br /> <br /> Max FPS: ~14-15<br /> <br /> Color Space: Rec. 709 in daylight (monochrome IR night vision)<br /> <br /> Audio Sample Rate: 8khz<br /> <br /> Audio Bits per sample: 32<br /> <br /> <br /> --[[User:netstar98|netstar98]]<br /> <br /> == Links ==<br /> <br /> [http://ipcamlive.com/faqs How do I get my camera connected to IPCamLive?]<br /> <br /> <br /> [http://swann.com/downloads/New_FTP/Name/Public_Software_Archives/Swannview_Link/ Swann&#039;s Own viewing software]<br /> NB Swann&#039;s viewing software is designed for their bespoke system.</div>

Netstar98