http://wiki.staging.zoneminder.com/api.php?action=feedcontributions&feedformat=atom&user=PiphoserZoneMinder Wiki - User contributions [en]2026-04-20T03:03:47ZUser contributionsMediaWiki 1.37.1http://wiki.staging.zoneminder.com/index.php?title=Hikvision&diff=6238Hikvision2014-06-26T13:36:59Z<p>Piphoser: /* Source Tab */</p>
<hr />
<div><br />
These seem to work. The biggest problem is people trying to use 'network camera' instead of 'ffmpeg' source type. Both have rtsp but only ffmpeg works here (because of h.264?) see [[http://www.cctvforum.com/viewtopic.php?f=19&t=37034]]<br />
<br />
The DS-2CD2732F-I and DS-2CD2032-I are tested<br />
<br />
=== Videostream: ===<br />
<br />
==== General Tab ====<br />
:Source Type : Ffmpeg<br />
==== Source Tab ====<br />
:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp<br />
(example: rtsp://admin:12345@mycamera.mydomain.com//Streaming/Channels/1)<br />
:Target Colorspace : 24 bit colour<br />
:Capture Width (pixels) : 1280 (set these to match camera config)<br />
:Capture Height (pixels) : 720<br />
<br />
I also had to set max FPS slightly higher than set in camera, or i lost the lower half of the frame. (Camera seems to send 10.6fps when 10 is selected)<br />
<br />
The following URL gives another Source path that was far more stable on Zoneminder 1.25: http://onlinetechadvice.blogspot.com/2014/04/hikvision-ds-2cd2032-i-working-in.html#comment-form<br />
<br />
The Source path that worked for me is: rtsp://username:password@XXX.XXX.XXX.XXX:554/cam/realmonitor?channel=1&subtype=0?tcp<br />
Of course, replace username and password and port with your specific installation information.<br />
<br />
===Model specific wikis===<br />
<br />
[[Hikvision_DS_2CD2732FIS|Hikvision DS-2CD2732F-I(S) Megapixel Outdoor IP Dome Camera]]</div>Piphoserhttp://wiki.staging.zoneminder.com/index.php?title=Hikvision&diff=6237Hikvision2014-06-26T13:36:19Z<p>Piphoser: /* Source Tab */</p>
<hr />
<div><br />
These seem to work. The biggest problem is people trying to use 'network camera' instead of 'ffmpeg' source type. Both have rtsp but only ffmpeg works here (because of h.264?) see [[http://www.cctvforum.com/viewtopic.php?f=19&t=37034]]<br />
<br />
The DS-2CD2732F-I and DS-2CD2032-I are tested<br />
<br />
=== Videostream: ===<br />
<br />
==== General Tab ====<br />
:Source Type : Ffmpeg<br />
==== Source Tab ====<br />
:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp<br />
(example: rtsp://admin:12345@mycamera.mydomain.com//Streaming/Channels/1)<br />
:Target Colorspace : 24 bit colour<br />
:Capture Width (pixels) : 1280 (set these to match camera config)<br />
:Capture Height (pixels) : 720<br />
<br />
I also had to set max FPS slightly higher than set in camera, or i lost the lower half of the frame. (Camera seems to send 10.6fps when 10 is selected)<br />
<br />
The following URL gives another Source path that was far more stable on Zoneminder 1.25: http://onlinetechadvice.blogspot.com/2014/04/hikvision-ds-2cd2032-i-working-in.html#comment-form<br />
<br />
The Source path that worked for me is: rtsp://username:password@192.168.1.120:554/cam/realmonitor?channel=1&subtype=0?tcp<br />
Of course, replace username and password and port with your specific installation information.<br />
<br />
===Model specific wikis===<br />
<br />
[[Hikvision_DS_2CD2732FIS|Hikvision DS-2CD2732F-I(S) Megapixel Outdoor IP Dome Camera]]</div>Piphoser