JVC

2009-02-20T13:37:22Z

Pygram:

JVC VN-C20 works with zoneminder 1.23. See details [http://www.pygram.com/libre/en:zoneminder here].

Axis

2009-02-20T13:30:03Z

Pygram:

ZoneMinder will work well with just about any [http://www.axis.com Axis camera], including the 205, 206, 207, 209, 210 and 211 ranges. It will also work with the 213 and 2130 cameras and support their [[PTZ]] functions through the web interface. It will not currently work with any camera that only provides an mpeg based image feed, though I don't know of any in this category at present.

Please note that early 207's has some hardware issues. See [http://www.zoneminder.com/forums/viewtopic.php?t=5022 this thread] in the forum for details.

Also note that the [http://www.axis.com/techsup/cam_servers/cam_2100/index.htm 2100 has been discontinued by Axis] and no longer supported, possibly due to hardware related problems. It's noted in the [http://www.zoneminder.com/forums/viewtopic.php?t=10079 forums that the camera sends the pictures it captures somewhat diced up.]

How to Offload the Motion detection to the camera [http://www.zoneminder.com/forums/viewtopic.php?t=10872&highlight=axis+motion thread here]

[http://www.pygram.com/libre/en:zoneminder Details] for Axis [http://www.axis.com/products/cam_207w/index.htm 207W] and [http://www.axis.com/products/cam_2110/ 2110]

[[Category:Cameras]]

Hardware Compatibility List

2009-02-20T13:26:06Z

Pygram: /* Network Cameras */

Zoneminder will work with almost any capture card that is supported by the linux kernel.

AKA; HCL, Hardware Compatibility List

== Capture Cards ==

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] - I don't know the name for it, 4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - options bttv card=77,77,77,77,77,77,77,77

[[Hauppauge]]

[[Ituner Spectra 8]] [http://www.ituner.com/spectra.htm]

[[Linux Media Labs LMLBT44]] [http://www.linuxmedialabs.com]

[[Hawkeye]]

[[Avermedia]]

[[TView 95/99]]

[[WinFast TV2000 XP]]

[[Osprey 100]]

[[Grandtec Grand X Guard]] [http://www.grandtec.com/xguard.htm]

[[Kodicom 4400r]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[Digiflower]]

Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.

A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== Network Cameras ==
For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.

*[[Sercomm RC8030]] Sold in Scandinavia/UK by Clas Ohlsson art.No. 36-2914. Get video from /img/video.mjpeg (undocumented, but works). Pan/tilt not tried (yet). Video better than Axis205, especially in low light conditions. Good P/T camera for the price, at least in Scandinavia.

* [[Axis]] (just about all recent models, including support for PTZ functions)

* [[D-Link]]

* [[Airlink 101]]

* [[Conceptronic]]

* [[Gadspot]] GS9603 IP Camera with Pan/Tilt, As well as the GS1600(H).

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.
* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* [[JVC]]

* [[Level One]] [[WCS-1090]]

* OvisLink AirLive WL-5400CAM

* [[Panasonic]]

* [[Sony]] SNC-M1 and SNC-M3 wired and wireless - including PTZ support. Possibly other Sony SNC-, RZ-, and IP- series?

*[[Toshiba]]

* [[Trendnet]] TV-IP200 / TV-IP200W, TV-IP300 and the TV-IP400 / TV-IP400W with PTZ control support.

* [[Veo Observer IP NetCam]] / Orite IP-Cam IC-301 / Sweex IP Network Camera JA200010 / other clones

* Any network camera that allows access to single JPEG image grabs or '''some but not all''' multi-part JPEG feeds.

== Network Digitizers ==

Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.

*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3

*[[Logitech QuickCam Express]], QuickCam Pro 3000, QuickCam Communicate STX

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

* Indirectly supports any [[Uvc | UVC/V4L2]] supported cam such as Logitech Quickcam Pro 5000 using [[Uvc | UVC Streaming]] .

'''Note that most USB cameras that can use Video4Linux, and so can be used by ZoneMinder, have older chipsets and can be hard to find new.'''
'''Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links.'''
[http://www.smcc.demon.nl/webcam/ Old Maintainer]
[http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the HCL at [http://www.linuxquestions.org/hcl/ linuxquestions.org]

[http://kmuto.jp/debian/hcl/ Debian]

[http://fedoraproject.org/wiki/HCL Fedora] [http://fedora-linux.nl/wiki/index.php/HCL Fedora Unofficial HCL]

[http://www.mandriva.com/hardware Mandriva]

[https://hardware.redhat.com/index.cgi RedHat]

[http://en.opensuse.org/Hardware Suse]

[http://doc.gwos.org/index.php/HCL Ubuntu]

Consultants

2009-02-20T13:20:06Z

Pygram: /* Any links here are not associated with or endorsed by ZoneMinder or its community, use them at your own risk. */

== Any links here are not associated with or endorsed by ZoneMinder or its community, use them at your own risk. ==

[http://www.prowessnetworks.com Prowess Networks]

[http://www.stagecoach-wireless.com Stagecoach Wireless engineers large-scale Monitoring Cameras Systems using ZM]

[http://www.pygram.com Pygram (Nantes, France)]

ZoneMinder Wiki - User contributions [en]

JVC

Axis

Hardware Compatibility List

Consultants