ZoneMinder Wiki - User contributions [en]

Airlink 101

2010-03-28T08:18:36Z

Setarcos: Reordering page details, minor link and info tweaks

== AIC250W ==

Airlink101 AIC250 settings for 2 fps as JPG stream: to use this camera with Zoneminder with JPG stream, use these settings for the Monitor: "hostname = <ip of camera>", "path = /video.jpg", use these settings for Options: "ffmpeg" as encoder, "jpg" stream and not mpeg. Select the right resolution for the camera, such as 640x480. To set the resolution for the camera, use a web browser and go to the configuration pages http://<ip of camera>. While in the configuration pages, delete the username and password to get the camera to work with these settings. Save the camera configuration.

AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200

== AICN747/AICN747W (Airlink101 SkyIPCam 747W) ==

Same Camera as Fitivision CS-130A/CS-131A and TrendNet TV-IP410/TV-IP410W. The 'W'/CS-131A version is wireless. Note: the Trendnet cameras have no built-in IR illumination.

The device requires authentication, so you need to provide the Remote Host Name parameter with
hostname = <username>:<password>@<ip of camera>
path = /cgi/jpg/image.cgi for JPEG stills, or /cgi/mjpg/mjpg.cgi for MJPEG (MJPEG mode requires firmware v1.0.0-24 or later)

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: <username>:<password>@<ip of camera>

Remote Host Port: 80

Remote Host Path: /cgi/mjpg/mjpg.cgi

Remote Image colors: 24 bit

Capture Width: 640

Capture Height: 480
*[http://www.zoneminder.com/forums/viewtopic.php?t=12271 SkyIPCam 7xx PTZ module for ZM and example audio push/dump scripts]
*[http://www.zoneminder.com/forums/viewtopic.php?t=12238 Additional info on the AirLink SkyIPCam 747W]

== Airlink Skyipcam777w ==

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: {username}:{password}@{camera ip}

Remote Host Port: 80

Remote Host Path: /cgi/mjpg/mjpg.cgi

Remote Image colors: 24 bit

Capture Width: 640

Capture Height: 480

*[http://www.zoneminder.com/forums/viewtopic.php?t=14094 Additional info on the 777W]

[[Category:Cameras]]

ZoneMinder 1.24.2 Bugfixes

2010-03-28T07:47:34Z

Setarcos: /* General fixes */ errno, undefined video format, old ffmpeg and MySQL 4 compatibility bugfixes

==General information==
In this page you can find links to to bugfixes for ZoneMinder version 1.24.2.
<br>To avoid clutter, if you want to add a fix to this page, please don't copy its code directly to this page! Make a thread in [http://www.zoneminder.com/forums/viewforum.php?f=9 User Contributions forum] and add the link to this page by editing it.
<br>For things other than bugfixes, such as control scripts, there are other pages for that, such as the [[Hardware Compatibility List]] and [[Patches]]. And if not, you can always make your own.

==Web Interface fixes==
*[http://www.zoneminder.com/forums/viewtopic.php?t=14844 "Function ereg() is deprecated" warning]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15387 Missing progress bar for certain users]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15347 Marking a monitor from a restricted user]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15278 Delete group "undefined index" warning]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15273 Disabling a monitor from monitor options page]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15272 Unarchive button in events list page]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15429 Opera mjpeg streaming capability]

==General fixes==
*[http://www.zoneminder.com/forums/viewtopic.php?t=15330 "Failed to query crop" error]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15255 "Incomplete read of frame image data" error]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15621 "`errno' was not declared in this scope" error]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15621 "V4L2_PIX_FMT_HM12' was not declared in this scope" error]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15621 "avformat_alloc_context' was not declared in this scope" error]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15621 "You have an error in your SQL syntax;... 'where Name = 'Monitors'" MySQL 4.x compatibility issue]

==Other fixes==
*[http://www.zoneminder.com/forums/viewtopic.php?t=13712 Web Interface Improvements / Backend minor fixes]
*[http://www.zoneminder.com/forums/viewtopic.php?t=14008 More ZM 1.24.2 fixes]
*[http://www.zoneminder.com/forums/viewtopic.php?t=15428 Broken DVR controls and progress for some people]

Airlink 101

2010-03-26T23:59:46Z

Setarcos: /* AICN747/AICN747W */ Updated references to MJPEG support in v1.0.0-24 firmware

== Airlink Skyipcam777w ==

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: {username}:{password}@{camera ip}

Remote Host Port: 80

Remote Host Path: /cgi/mjpg/mjpg.cgi

Remote Image colors: 24 bit

Capture Width: 640

Capture Height: 480

http://www.zoneminder.com/forums/viewtopic.php?t=14094

== AIC250W ==

Airlink101 AIC250 settings for 2 fps as JPG stream: to use this camera with Zoneminder with JPG stream, use these settings for the Monitor: "hostname = <ip of camera>", "path = /video.jpg", use these settings for Options: "ffmpeg" as encoder, "jpg" stream and not mpeg. Select the right resolution for the camera, such as 640x480. To set the resolution for the camera, use a web browser and go to the configuration pages http://<ip of camera>. While in the configuration pages, delete the username and password to get the camera to work with these settings. Save the camera configuration.

AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200

Airlink101 SkyIPCam 747W
The device requires authentication, so you need to provide the Remote Host Name parameter with <username>:<password>@mycamip

/cgi/jpg/image.cgi

http://www.zoneminder.com/forums/viewtopic.php?t=12238&highlight=cameras

== AICN747/AICN747W ==

Same Camera as Fitivision CS-130A/CS-131A and TrendNet TV-IP410/TV-IP410W. The 'W'/CS-131A version is wireless. Note: the Trendnet cameras have no built-in IR illumination.

hostname = <username>:<password>@<ip of camera>
path = /cgi/jpg/image.cgi for JPEG stills, or /cgi/mjpg/mjpg.cgi for MJPEG (MJPEG mode requires firmware v1.0.0-24 or later)

PTZ module details: [http://www.zoneminder.com/forums/viewtopic.php?t=12271 SkyIPCam 7xx ZM Module and Audio dump script]

[http://www.zoneminder.com/forums/viewtopic.php?t=12238 Additional info on the AirLink SkyIPCam 747W]

[[Category:Cameras]]

Airlink 101

2008-09-19T06:04:19Z

Setarcos: Added link to PTZ module for AICN747 and made a few formatting changes

Airlink 101

2008-09-12T20:43:25Z

Setarcos: Addition of TrendNet TV-IP410/TV-IP410W

Airlink101 AIC250 settings for 2 fps as JPG stream: to use this camera with Zoneminder with JPG stream, use these settings for the Monitor: "hostname = <ip of camera>", "path = /video.jpg", use these settings for Options: "ffmpeg" as encoder, "jpg" stream and not mpeg. Select the right resolution for the camera, such as 640x480. To set the resolution for the camera, use a web browser and go to the configuration pages http://<ip of camera>. While in the configuration pages, delete the username and password to get the camera to work with these settings. Save the camera configuration.

AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200

AICN747/AICN747W - Same Camera as Fitivision CS-130A/CS-131A and TrendNet TV-IP410/TV-IP410W. The 'W'/CS-131A version is wireless. Note: the Trendnet cameras have no built-in IR illumination.
hostname = <username>:<password>@<ip of camera>
path = /cgi/jpg/image.cgi for JPEG stills, or /cgi/mjpg/mjpeg.cgi for MJPEG (MJPEG mode doesn't return the correct MIME type, and thus doesn't appear to work with ZM)
PTZ support for this camera is forthcoming.

Airlink 101

2008-09-12T20:29:36Z

Setarcos: Addition of AICN747/AICN747W

Airlink101 AIC250 settings for 2 fps as JPG stream: to use this camera with Zoneminder with JPG stream, use these settings for the Monitor: "hostname = <ip of camera>", "path = /video.jpg", use these settings for Options: "ffmpeg" as encoder, "jpg" stream and not mpeg. Select the right resolution for the camera, such as 640x480. To set the resolution for the camera, use a web browser and go to the configuration pages http://<ip of camera>. While in the configuration pages, delete the username and password to get the camera to work with these settings. Save the camera configuration.

AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200

AICN747/AICN747W - Same Camera as Fitivision CS-130A/CS-131A. The 'W'/CS-131A version is wireless.
hostname = <username>:<password>@<ip of camera>
path = /cgi/jpg/image.cgi for JPEG stills, or /cgi/mjpg/mjpeg.cgi for MJPEG (MJPEG mode doesn't return the correct MIME type, and thus doesn't appear to work with ZM)
PTZ support for this camera is forthcoming.