ZoneMinder Wiki - User contributions [en]

Anpviz

2020-02-06T10:29:33Z

Stulander: /* IPC-D250G-S */

== IPC-D250G-S ==

Available on Amazon. Audio works. Uses RTSP, H264/H265.

This camera comes with a default IP address of 192.168.0.123.

Default login: admin | 12456

No need to install any of the included software.

Source Type: FFMPEG 
Remote Protocol: TCP 

Stream URL: rtsp://0.0.0.0/live/mpeg4

There are some cloud options in the camera UI, probably a good idea to disable them all.

Hardware Compatibility List

2020-02-06T10:19:02Z

Stulander: /* IP Network Cameras */

The ZoneMinder Wiki is community based. That means the list below is only as good as those who chose to maintain it. Did you find something outdated? Did you get a camera working, which is not shown in the list below? Please consider adding or improving this list.

== IP Network Cameras ==
Most modern IP cameras are ONVIF compliant, which means most modern IP Camera should work with ZoneMinder. There are some caveats to this general rule. Cameras which (only) send an encrypted stream will not work with any third party recording software. Some "cloud" cameras fit into this category. You should verify one can adjust camera parameters such as frame rate, resolution, contrast, etc within the camera's web portal. This, in itself, is not a show stopper, but it will make your experience a lot easier.

The following list of IP cameras is not exhaustive. If your camera is not listed, it does not mean it will not work with ZoneMinder. Rather it likely means no one has taken the time to add it to the list. Please consider adding your camera to this list once you get it working. More details on obtaining stream paths can be found on [[Finding Camera Stream Paths]].

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[AirLive AirCam OD325HD]]

* [[Amcrest QCam]]

* [[Amovision AM-Q630M | Amovision]] some

* [[Anpviz]]

* [[Android]]

* [[Anran VGB101-IP]]

* [[Apexis]] most if not all (only tested some)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] Nearly all

*[[BesDERSEC]] HX WIFI - ONVIF

* [[Brickcom]] These have been tested

* [[B-QTECH]] H.264 Camera

* [[BSTI]] Some

* [[Cisco]] some

* [[COT Pro]] some

* [[Dahua]] (IPC-HDB3200C, probably others)

* [[DBPower]] (H.264 Model, possibly others)

* [[Digoo]] At least M1Q, probably more.

* [[D-Link]] Most

* [[EasyN]] (Mini Speed Dome 1BF)

* [[Edimax]] only tested some

* [[EyeSpy247]] (Branded Sercomm RC8021)

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[GBF_PL960PM_IP_Video_Door_Phone | GBF]] One reportedly (doorbell camera)

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[Grandstream]] Grandstream (GXV-3672-FHD & GXV-3672-FHD-36 & GXV3611_HD tested)

* [[Hikvision]] Some

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[ieGeek]] CT0247UK

* [[Instar]] (IN-2905, IN-5907HD, possibly others)

* [[InternetEye]] M6840

* [[Jennov]] (only tested model JE-A73WG20-E)

* [[Keekoon]] KK002 (KK001 and 3 are probably the same)

* [[Level One]] some

* [[Lilin]] LR7022

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Messoa]] (NCR870, probably others)

* [[MPIX]] (40-IRBF-K28, probably others)

* [[Netcat]] IP Cameras

* [https://wiki.openwrt.org/tag/ip_camera?do=showtag&tag=ip_camera Openwrt] Webcam, or custom firmware on commercial cameras.
* [[Panasonic]] IP Cameras

* [[Pelco]] IP Cameras

* [[Revotech]] I6032W-P

* [[Reolink]]

* [[Rimax]] Some

* [[Rovio]]

* [[Sercomm]] (ADT)

* [[Sony]] Most

* [[Sricam]]

* [[SV3C]]

* [[TMEZON]] Some

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Uokoo]] One

* [[Vstar T7833WIP HD Dome Network Camera]]

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[Wgcc]] One

* [[Wyze Cam]]

* [[x-vision]] Xvision cameras by y3k (some)

* [[Xiongmai]] They sell modules used in multiple Chinese cameras like Misecu IPC-DM07-20SC (with module IPG-50HV20PES-S)

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* [[ZoneWay ZW-NC863M-P Megapixel IP]]

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* [[PLANET]] some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

*[[Logitech 700 series]] some

*[[Ubiqiti]] some

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== IP Video Encoder ==

Like Network Cameras, these devices produce a video stream over tcp/ip - but they do so with input from an analog video camera or other video source. An easy way to find these are to search for video encoders or video servers, e.g. 8 channel video encoder, or 2 channel video server. Newer video encoders may also support HD Analog either in addition, or instead of analog streams (how they implement HD analog, depends upon the brand. There are currently competing standards such as AHD, EX-SDI, HD-SDI, HD-CVI, HD-TVI, etc...).

* [[Synectics E100]] encoder

*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

* [[Axis]] Multiple

* [[Bosch VIP X1 Single-channel]] video encoder [http://products.boschsecuritysystems.eu/en/EMEA/products/bxp/SKU15449253232961378955-CATMda7ec5dc0edf5b1a0b8cb619e2e11308]

* [[GXV3504]] Grandstream 4 channel video encoder.

* [[Hikvision]] HD Analog (With errors)

* [[Samsung]] uses AHD cameras, and possibly NTSC/PAL cameras.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Howell-Tempest VC 878B-Q]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[UDP Technology NCP3200v2]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

[[KesCom PG104]]

[[IEI Technology Corp. IVC-268G-R20]]

== bt8x8 Cards ==
BT8x8 cards are handled by the Kernel module BTTV. A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

Geovision GV-800 8 inputs - [https://forums.zoneminder.com/viewtopic.php?f=14&t=12327] Recommended to review forums.

Most other BTTV (bt878, bt848) cards, see '''/usr/src/linux/Documentation/video4linux/bttv/CARDLIST''' on your system for a list. You can also find more details on the BTTV module, such as parameters to pass via insmod, [https://www.kernel.org/doc/html/latest/media/v4l-drivers/bttv.html here].

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: Advent AWC213, Creative Labs VF0420, [[Logitech QuickCam Express]], Logitech HD C270, QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

*Company name: PU`Aimetis model: PUAN-3656 (2MP / Max resolution: 1920*1080, MJPEG - 1920X1080 @ 30fps / YUV2 - 1920X1080 @ 5fps)

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the [http://www.zoneminder.com/forums/viewforum.php?f=10 HCL]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder

== Single Board Computers ==

Single board computers such as the Raspberry Pi, Odroid, Beagleboard, and many others.

See [[Single Board Computers]]

Ampviz

2020-02-06T10:18:23Z

Stulander: Stulander moved page Ampviz to Anpviz: Name was typo

#REDIRECT [[Anpviz]]

Anpviz

2020-02-06T10:18:23Z

Stulander: Stulander moved page Ampviz to Anpviz: Name was typo

== IPC-D250G-S ==

Available on Amazon. Haven't tried audio yet. Uses RTSP, H264/H265.

This camera comes with a default IP address of 192.168.0.123, but for some reason you won't be able to connect to it until you install the "webconfig.exe" software and assign it a new IP address. Yes, connecting with cable direct to your PC and changing your IPv4 address to 192.168.0.10 or whatever won't work. The manual seems to imply that this should be possible however, so I'm not sure why it behaves like this.

The webconfig.exe is your standard Chinese crapware, you may want to install it in a VM if you're paranoid. I did. By default it will try to look up some Chinese domain names, you can turn it off by disabling all cloud features etc. within the web UI.

Source Type: FFMPEG 
Remote Protocol: TCP

Hardware Compatibility List

2020-02-06T10:17:15Z

Stulander: /* IP Network Cameras */

The ZoneMinder Wiki is community based. That means the list below is only as good as those who chose to maintain it. Did you find something outdated? Did you get a camera working, which is not shown in the list below? Please consider adding or improving this list.

== IP Network Cameras ==
Most modern IP cameras are ONVIF compliant, which means most modern IP Camera should work with ZoneMinder. There are some caveats to this general rule. Cameras which (only) send an encrypted stream will not work with any third party recording software. Some "cloud" cameras fit into this category. You should verify one can adjust camera parameters such as frame rate, resolution, contrast, etc within the camera's web portal. This, in itself, is not a show stopper, but it will make your experience a lot easier.

The following list of IP cameras is not exhaustive. If your camera is not listed, it does not mean it will not work with ZoneMinder. Rather it likely means no one has taken the time to add it to the list. Please consider adding your camera to this list once you get it working. More details on obtaining stream paths can be found on [[Finding Camera Stream Paths]].

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[AirLive AirCam OD325HD]]

* [[Amcrest QCam]]

* [[Amovision AM-Q630M | Amovision]] some

* [[Ampviz | Anpviz]]

* [[Android]]

* [[Anran VGB101-IP]]

* [[Apexis]] most if not all (only tested some)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] Nearly all

*[[BesDERSEC]] HX WIFI - ONVIF

* [[Brickcom]] These have been tested

* [[B-QTECH]] H.264 Camera

* [[BSTI]] Some

* [[Cisco]] some

* [[COT Pro]] some

* [[Dahua]] (IPC-HDB3200C, probably others)

* [[DBPower]] (H.264 Model, possibly others)

* [[Digoo]] At least M1Q, probably more.

* [[D-Link]] Most

* [[EasyN]] (Mini Speed Dome 1BF)

* [[Edimax]] only tested some

* [[EyeSpy247]] (Branded Sercomm RC8021)

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[GBF_PL960PM_IP_Video_Door_Phone | GBF]] One reportedly (doorbell camera)

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[Grandstream]] Grandstream (GXV-3672-FHD & GXV-3672-FHD-36 & GXV3611_HD tested)

* [[Hikvision]] Some

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[ieGeek]] CT0247UK

* [[Instar]] (IN-2905, IN-5907HD, possibly others)

* [[InternetEye]] M6840

* [[Jennov]] (only tested model JE-A73WG20-E)

* [[Keekoon]] KK002 (KK001 and 3 are probably the same)

* [[Level One]] some

* [[Lilin]] LR7022

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Messoa]] (NCR870, probably others)

* [[MPIX]] (40-IRBF-K28, probably others)

* [[Netcat]] IP Cameras

* [https://wiki.openwrt.org/tag/ip_camera?do=showtag&tag=ip_camera Openwrt] Webcam, or custom firmware on commercial cameras.
* [[Panasonic]] IP Cameras

* [[Pelco]] IP Cameras

* [[Revotech]] I6032W-P

* [[Reolink]]

* [[Rimax]] Some

* [[Rovio]]

* [[Sercomm]] (ADT)

* [[Sony]] Most

* [[Sricam]]

* [[SV3C]]

* [[TMEZON]] Some

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Uokoo]] One

* [[Vstar T7833WIP HD Dome Network Camera]]

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[Wgcc]] One

* [[Wyze Cam]]

* [[x-vision]] Xvision cameras by y3k (some)

* [[Xiongmai]] They sell modules used in multiple Chinese cameras like Misecu IPC-DM07-20SC (with module IPG-50HV20PES-S)

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* [[ZoneWay ZW-NC863M-P Megapixel IP]]

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* [[PLANET]] some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

*[[Logitech 700 series]] some

*[[Ubiqiti]] some

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== IP Video Encoder ==

Like Network Cameras, these devices produce a video stream over tcp/ip - but they do so with input from an analog video camera or other video source. An easy way to find these are to search for video encoders or video servers, e.g. 8 channel video encoder, or 2 channel video server. Newer video encoders may also support HD Analog either in addition, or instead of analog streams (how they implement HD analog, depends upon the brand. There are currently competing standards such as AHD, EX-SDI, HD-SDI, HD-CVI, HD-TVI, etc...).

* [[Synectics E100]] encoder

*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

* [[Axis]] Multiple

* [[Bosch VIP X1 Single-channel]] video encoder [http://products.boschsecuritysystems.eu/en/EMEA/products/bxp/SKU15449253232961378955-CATMda7ec5dc0edf5b1a0b8cb619e2e11308]

* [[GXV3504]] Grandstream 4 channel video encoder.

* [[Hikvision]] HD Analog (With errors)

* [[Samsung]] uses AHD cameras, and possibly NTSC/PAL cameras.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Howell-Tempest VC 878B-Q]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[UDP Technology NCP3200v2]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

[[KesCom PG104]]

[[IEI Technology Corp. IVC-268G-R20]]

== bt8x8 Cards ==
BT8x8 cards are handled by the Kernel module BTTV. A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

Geovision GV-800 8 inputs - [https://forums.zoneminder.com/viewtopic.php?f=14&t=12327] Recommended to review forums.

Most other BTTV (bt878, bt848) cards, see '''/usr/src/linux/Documentation/video4linux/bttv/CARDLIST''' on your system for a list. You can also find more details on the BTTV module, such as parameters to pass via insmod, [https://www.kernel.org/doc/html/latest/media/v4l-drivers/bttv.html here].

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: Advent AWC213, Creative Labs VF0420, [[Logitech QuickCam Express]], Logitech HD C270, QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

*Company name: PU`Aimetis model: PUAN-3656 (2MP / Max resolution: 1920*1080, MJPEG - 1920X1080 @ 30fps / YUV2 - 1920X1080 @ 5fps)

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the [http://www.zoneminder.com/forums/viewforum.php?f=10 HCL]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder

== Single Board Computers ==

Single board computers such as the Raspberry Pi, Odroid, Beagleboard, and many others.

See [[Single Board Computers]]

Hardware Compatibility List

2020-02-06T10:16:39Z

Stulander: /* IP Network Cameras */

The ZoneMinder Wiki is community based. That means the list below is only as good as those who chose to maintain it. Did you find something outdated? Did you get a camera working, which is not shown in the list below? Please consider adding or improving this list.

== IP Network Cameras ==
Most modern IP cameras are ONVIF compliant, which means most modern IP Camera should work with ZoneMinder. There are some caveats to this general rule. Cameras which (only) send an encrypted stream will not work with any third party recording software. Some "cloud" cameras fit into this category. You should verify one can adjust camera parameters such as frame rate, resolution, contrast, etc within the camera's web portal. This, in itself, is not a show stopper, but it will make your experience a lot easier.

The following list of IP cameras is not exhaustive. If your camera is not listed, it does not mean it will not work with ZoneMinder. Rather it likely means no one has taken the time to add it to the list. Please consider adding your camera to this list once you get it working. More details on obtaining stream paths can be found on [[Finding Camera Stream Paths]].

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[AirLive AirCam OD325HD]]

* [[Amcrest QCam]]

* [[Amovision AM-Q630M | Amovision]] some

* [[Anpviz | Ampviz]]

* [[Android]]

* [[Anran VGB101-IP]]

* [[Apexis]] most if not all (only tested some)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] Nearly all

*[[BesDERSEC]] HX WIFI - ONVIF

* [[Brickcom]] These have been tested

* [[B-QTECH]] H.264 Camera

* [[BSTI]] Some

* [[Cisco]] some

* [[COT Pro]] some

* [[Dahua]] (IPC-HDB3200C, probably others)

* [[DBPower]] (H.264 Model, possibly others)

* [[Digoo]] At least M1Q, probably more.

* [[D-Link]] Most

* [[EasyN]] (Mini Speed Dome 1BF)

* [[Edimax]] only tested some

* [[EyeSpy247]] (Branded Sercomm RC8021)

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[GBF_PL960PM_IP_Video_Door_Phone | GBF]] One reportedly (doorbell camera)

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[Grandstream]] Grandstream (GXV-3672-FHD & GXV-3672-FHD-36 & GXV3611_HD tested)

* [[Hikvision]] Some

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[ieGeek]] CT0247UK

* [[Instar]] (IN-2905, IN-5907HD, possibly others)

* [[InternetEye]] M6840

* [[Jennov]] (only tested model JE-A73WG20-E)

* [[Keekoon]] KK002 (KK001 and 3 are probably the same)

* [[Level One]] some

* [[Lilin]] LR7022

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Messoa]] (NCR870, probably others)

* [[MPIX]] (40-IRBF-K28, probably others)

* [[Netcat]] IP Cameras

* [https://wiki.openwrt.org/tag/ip_camera?do=showtag&tag=ip_camera Openwrt] Webcam, or custom firmware on commercial cameras.
* [[Panasonic]] IP Cameras

* [[Pelco]] IP Cameras

* [[Revotech]] I6032W-P

* [[Reolink]]

* [[Rimax]] Some

* [[Rovio]]

* [[Sercomm]] (ADT)

* [[Sony]] Most

* [[Sricam]]

* [[SV3C]]

* [[TMEZON]] Some

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Uokoo]] One

* [[Vstar T7833WIP HD Dome Network Camera]]

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[Wgcc]] One

* [[Wyze Cam]]

* [[x-vision]] Xvision cameras by y3k (some)

* [[Xiongmai]] They sell modules used in multiple Chinese cameras like Misecu IPC-DM07-20SC (with module IPG-50HV20PES-S)

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* [[ZoneWay ZW-NC863M-P Megapixel IP]]

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* [[PLANET]] some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

*[[Logitech 700 series]] some

*[[Ubiqiti]] some

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== IP Video Encoder ==

Like Network Cameras, these devices produce a video stream over tcp/ip - but they do so with input from an analog video camera or other video source. An easy way to find these are to search for video encoders or video servers, e.g. 8 channel video encoder, or 2 channel video server. Newer video encoders may also support HD Analog either in addition, or instead of analog streams (how they implement HD analog, depends upon the brand. There are currently competing standards such as AHD, EX-SDI, HD-SDI, HD-CVI, HD-TVI, etc...).

* [[Synectics E100]] encoder

*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

* [[Axis]] Multiple

* [[Bosch VIP X1 Single-channel]] video encoder [http://products.boschsecuritysystems.eu/en/EMEA/products/bxp/SKU15449253232961378955-CATMda7ec5dc0edf5b1a0b8cb619e2e11308]

* [[GXV3504]] Grandstream 4 channel video encoder.

* [[Hikvision]] HD Analog (With errors)

* [[Samsung]] uses AHD cameras, and possibly NTSC/PAL cameras.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Howell-Tempest VC 878B-Q]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[UDP Technology NCP3200v2]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

[[KesCom PG104]]

[[IEI Technology Corp. IVC-268G-R20]]

== bt8x8 Cards ==
BT8x8 cards are handled by the Kernel module BTTV. A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

Geovision GV-800 8 inputs - [https://forums.zoneminder.com/viewtopic.php?f=14&t=12327] Recommended to review forums.

Most other BTTV (bt878, bt848) cards, see '''/usr/src/linux/Documentation/video4linux/bttv/CARDLIST''' on your system for a list. You can also find more details on the BTTV module, such as parameters to pass via insmod, [https://www.kernel.org/doc/html/latest/media/v4l-drivers/bttv.html here].

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: Advent AWC213, Creative Labs VF0420, [[Logitech QuickCam Express]], Logitech HD C270, QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

*Company name: PU`Aimetis model: PUAN-3656 (2MP / Max resolution: 1920*1080, MJPEG - 1920X1080 @ 30fps / YUV2 - 1920X1080 @ 5fps)

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the [http://www.zoneminder.com/forums/viewforum.php?f=10 HCL]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder

== Single Board Computers ==

Single board computers such as the Raspberry Pi, Odroid, Beagleboard, and many others.

See [[Single Board Computers]]

Hardware Compatibility List

2020-02-06T10:16:20Z

Stulander: Fixed typo "ampviz" > "anpviz"

Beginner hardware

2020-02-06T10:14:36Z

Stulander: Removed subjective comments on hikvision's bad press - doesn't explain where or how it has been addressed. Not relevant.

==Option 1==

The best, first advice is to check that your camera is compatible with zoneminder's motion JPEG (MJPEG).

You should read the [https://zoneminder.readthedocs.io/en/stable/ Documentation]. The developers spent and continue to spend a great deal of time writing it... you should spend at least a little time reading it. Specifically, read the part about shared memory.

'''Recommended IP cameras'''

[[Axis]] brand cameras are a good choice, but expensive.

[[Hikvision]] cameras have decent quality and are more affordable.

Generally speaking, any camera that is ONVIF compliant will work with ZoneMinder. The differences between a more expensive camera versus a cheaper camera is how well it performs in non-ideal lighting conditions. If your camera is in area that is always well (and evenly) lit, then that too-good-to-be-true super-cheap 1080p IP camera, might work just fine. On the other hand, it might look terrible at night or if part of scene is under a shadow. It's these kind of performance features that are hard to determine ahead of time without physically testing the camera.

==Option 2==

The best beginners hardware and setup is to use an old unused system, anything from late Pentium 3 or Athlon XP generation of cpus will be more than enough for a setup capable of running 2 or 3 (analog) cameras depending on configuration.

You will need one of the cheap pci cctv capture cards from Ebay that use the bt878 chip, if you search for pci cctv on ebay then most of the cheap cards that show up will be a card of this type, see the [[Pico2000]] section of the Zoneminder wiki for a few photos of these cards and a little more technical information.
For capture cards with tw6800 chips you have to compile the driver. Have a look at [[KesCom PG104]] for instructions.

You can alternatively buy them and better boards from the retailers in the [[shop]] section of this webpage.

You will need to configure the capture card as described in the [[Pico2000]] wiki

Another (possibly better) option is to purchase a standalone IP Video Encoder. see [[Hardware_Compatibility_List]] for more details.

Next source some standard analogue cameras from the retailers listed on this page or any other source you like.

Install Zoneminder using the [[CentOS]] guide contained in the wiki or any other distro guide you are happy with, I personally started with the CentOS guide and it has worked well for me.

EDIT: [[Ubuntu]] and [[Debian]] are the easiest to setup, and best supported. Beginners are advised to use those.

Configure and then you're running!!!.

This is of course a beginners system and so can be expanded and improved on once you are happy, my aim in this design is to build a Zoneminder system as cheaply and basic as possible, I have made a lots of setups that are still operating on the above basis.

==See Also==
[[Dummies Guide]]

Anpviz

2019-11-01T12:23:45Z

Stulander: /* Ampviz */

Anpviz

2019-11-01T12:08:32Z

Stulander:

== Ampviz ==

Only tested IPC-D250G-S. Available on Amazon. Haven't tried audio yet. Uses RTSP, H264/H265.

This camera comes with a default IP address of 192.168.0.123, but for some reason you won't be able to connect to it until you install the "webconfig.exe" software and assign it a new IP address. Yes, connecting with cable direct to your PC and changing your IPv4 address to 192.168.0.10 or whatever won't work. The manual seems to imply that this should be possible however, so I'm not sure why it behaves like this.

The webconfig.exe is your standard Chinese crapware, you may want to install it in a VM if you're paranoid. I did. By default it will try to look up some Chinese domain names, you can turn it off by disabling all cloud features etc. within the web UI.

Source Type: FFMPEG 
Remote Protocol: TCP

Anpviz

2019-11-01T12:03:25Z

Stulander: Created page with "== Ampviz == Only tested IPC-D250G-S. Available on Amazon. Haven't tried audio yet. Source Type: FFMPEG Remote Protocol: TCP "

== Ampviz ==

Only tested IPC-D250G-S. Available on Amazon. Haven't tried audio yet.

Source Type: FFMPEG 
Remote Protocol: TCP

Hardware Compatibility List

2019-11-01T11:59:35Z

Stulander: /* IP Network Cameras */

The ZoneMinder Wiki is community based. That means the list below is only as good as those who chose to maintain it. Did you find something outdated? Did you get a camera working, which is not shown in the list below? Please consider adding or improving this list.

== IP Network Cameras ==
Most modern IP cameras are ONVIF compliant, which means most modern IP Camera should work with ZoneMinder. There are some caveats to this general rule. Cameras which (only) send an encrypted stream will not work with any third party recording software. Some "cloud" cameras fit into this category. You should verify one can adjust camera parameters such as frame rate, resolution, contrast, etc within the camera's web portal. This, in itself, is not a show stopper, but it will make your experience a lot easier.

The following list of IP cameras is not exhaustive. If your camera is not listed, it does not mean it will not work with ZoneMinder. Rather it likely means no one has taken the time to add it to the list. Please consider adding your camera to this list once you get it working. More details on obtaining stream paths can be found on [[Finding Camera Stream Paths]].

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[AirLive AirCam OD325HD]]

* [[Amcrest QCam]]

* [[Amovision AM-Q630M | Amovision]] some

* [[Ampviz]]

* [[Android]]

* [[Anran VGB101-IP]]

* [[Apexis]] most if not all (only tested some)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] Nearly all

*[[BesDERSEC]] HX WIFI - ONVIF

* [[Brickcom]] These have been tested

* [[B-QTECH]] H.264 Camera

* [[BSTI]] Some

* [[Cisco]] some

* [[COT Pro]] some

* [[Dahua]] (IPC-HDB3200C, probably others)

* [[DBPower]] (H.264 Model, possibly others)

* [[Digoo]] At least M1Q, probably more.

* [[D-Link]] Most

* [[EasyN]] (Mini Speed Dome 1BF)

* [[Edimax]] only tested some

* [[EyeSpy247]] (Branded Sercomm RC8021)

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[GBF_PL960PM_IP_Video_Door_Phone | GBF]] One reportedly (doorbell camera)

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[Grandstream]] Grandstream (GXV-3672-FHD & GXV-3672-FHD-36 & GXV3611_HD tested)

* [[Hikvision]] Some

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[ieGeek]] CT0247UK

* [[Instar]] (IN-2905, IN-5907HD, possibly others)

* [[InternetEye]] M6840

* [[Jennov]] (only tested model JE-A73WG20-E)

* [[Keekoon]] KK002 (KK001 and 3 are probably the same)

* [[Level One]] some

* [[Lilin]] LR7022

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Messoa]] (NCR870, probably others)

* [[MPIX]] (40-IRBF-K28, probably others)

* [[Netcat]] IP Cameras

* [https://wiki.openwrt.org/tag/ip_camera?do=showtag&tag=ip_camera Openwrt] Webcam, or custom firmware on commercial cameras.
* [[Panasonic]] IP Cameras

* [[Pelco]] IP Cameras

* [[Revotech]] I6032W-P

* [[Rimax]] Some

* [[Rovio]]

* [[Sercomm]] (ADT)

* [[Sony]] Most

* [[Sricam]]

* [[SV3C]]

* [[TMEZON]] Some

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Vstar T7833WIP HD Dome Network Camera]]

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[Wyze Cam]]

* [[x-vision]] Xvision cameras by y3k (some)

* [[Xiongmai]] They sell modules used in multiple Chinese cameras like Misecu IPC-DM07-20SC (with module IPG-50HV20PES-S)

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* [[ZoneWay ZW-NC863M-P Megapixel IP]]

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* [[PLANET]] some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

*[[Logitech 700 series]] some

*[[Ubiqiti]] some

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== IP Video Encoder ==

Like Network Cameras, these devices produce a video stream over tcp/ip - but they do so with input from an analog video camera or other video source. An easy way to find these are to search for video encoders or video servers, e.g. 8 channel video encoder, or 2 channel video server. Newer video encoders may also support HD Analog either in addition, or instead of analog streams (how they implement HD analog, depends upon the brand. There are currently competing standards such as AHD, EX-SDI, HD-SDI, HD-CVI, HD-TVI, etc...).

* [[Synectics E100]] encoder

*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

* [[Axis]] Multiple

* [[Bosch VIP X1 Single-channel]] video encoder [http://products.boschsecuritysystems.eu/en/EMEA/products/bxp/SKU15449253232961378955-CATMda7ec5dc0edf5b1a0b8cb619e2e11308]

* [[GXV3504]] Grandstream 4 channel video encoder.

* [[Hikvision]] HD Analog (With errors)

* [[Samsung]] uses AHD cameras, and possibly NTSC/PAL cameras.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Howell-Tempest VC 878B-Q]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[UDP Technology NCP3200v2]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

[[KesCom PG104]]

[[IEI Technology Corp. IVC-268G-R20]]

== bt8x8 Cards ==
BT8x8 cards are handled by the Kernel module BTTV. A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

Geovision GV-800 8 inputs - [https://forums.zoneminder.com/viewtopic.php?f=14&t=12327] Recommended to review forums.

Most other BTTV (bt878, bt848) cards, see '''/usr/src/linux/Documentation/video4linux/bttv/CARDLIST''' on your system for a list. You can also find more details on the BTTV module, such as parameters to pass via insmod, [https://www.kernel.org/doc/html/latest/media/v4l-drivers/bttv.html here].

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: Advent AWC213, Creative Labs VF0420, [[Logitech QuickCam Express]], Logitech HD C270, QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

*Company name: PU`Aimetis model: PUAN-3656 (2MP / Max resolution: 1920*1080, MJPEG - 1920X1080 @ 30fps / YUV2 - 1920X1080 @ 5fps)

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the [http://www.zoneminder.com/forums/viewforum.php?f=10 HCL]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder

== Single Board Computers ==

Single board computers such as the Raspberry Pi, Odroid, Beagleboard, and many others.

See [[Single Board Computers]]