ZoneMinder Wiki - User contributions [en]

Hikvision DS-2CD2142FWD-I

2016-03-16T23:44:06Z

Thermionic:

DS-2CD2142FWD-I 4MP Mini Vandal Dome IP Camera PoE with English firmware [http://overseas.hikvision.com/en/Products_accessries_158_i5605.html]

Confirmed working with Zonminder 1.29 on Ubuntu 14.04 using RTP/Unicast or RTP/RTSP on

== Videostream settings (for me): ==

Source type libvlc, FPS boxes left blank

:Source Path main channel : rtsp://user:password@<hostname>//Streaming/Channels/1
:Source Path sub channel : rtsp://user:password@<hostname>//Streaming/Channels/2

:Main Capture Width (pixels) : 1920
:Main Capture Height (pixels): 1080

:Sub Capture Width (pixels) : 640
:Sub Capture Height (pixels): 360

everything else as default

also works at 2699x1520 & 1280x720 if the camera is set appropriately

Hikvision DS-2CD2142FWD-I

2016-03-16T23:41:04Z

Thermionic: Created page with "DS-2CD2142FWD-I 4MP Mini Vandal Dome IP Camera PoE [http://overseas.hikvision.com/en/Products_accessries_158_i5605.html] Confirmed working with Zonminder 1.29 on Ubuntu 14.04..."

DS-2CD2142FWD-I 4MP Mini Vandal Dome IP Camera PoE [http://overseas.hikvision.com/en/Products_accessries_158_i5605.html]

Confirmed working with Zonminder 1.29 on Ubuntu 14.04 using RTP/Unicast or RTP/RTSP on

== Videostream settings (for me): ==

Source type libvlc, FPS boxes left blank

:Source Path main channel : rtsp://user:password@<hostname>//Streaming/Channels/1
:Source Path sub channel : rtsp://user:password@<hostname>//Streaming/Channels/2

:Main Capture Width (pixels) : 1920
:Main Capture Height (pixels): 1080

:Sub Capture Width (pixels) : 640
:Sub Capture Height (pixels): 360

everything else as default

also works at 2699x1520 & 1280x720 if the camera is set appropriately

Hikvision DS-2CD2332-I

2016-03-16T23:20:56Z

Thermionic: Undo revision 7512 by Thermionic (talk)

DS-2CD2332-I 3MP Outdoor Network Mini Dome Camera.
[http://overseas.hikvision.com/en/Products_accessries_159_i3668.html]

I bought this one [http://www.ebay.com/itm/Hikvision-DS-2CD2332-I-3MP-IP66-IR-EXIR-Turret-Outdoor-Network-Dome-Camera-POE-/111360908513 Hikvision DS-2CD2332-I 3MP IP66 IR EXIR Turret Outdoor Network Dome Camera POE].

I can confirm that the cam works with Zoneminder 1.26 on Ubuntu 14.04 using RTSP. The quality is rather poor: lower half of the screen is often blurred. Then I upgraded to Zoneminder 1.28 [https://launchpad.net/~iconnor/+archive/ubuntu/zoneminder PPA Isaac Connor] and chose RTP/RTSP and the cam is working fine. The installed package (seen with dpkg) is 1.28.0-trusty on amd64.

== Videostream settings (for me): ==

Source type ffmpeg, max 9 FPS and max 15 FPS (and maybe others, didn't try)

:Source Path : rtsp://user:password@192.0.2.1//Streaming/Channels/1

:Capture Width (pixels) : 1920
:Capture Height (pixels): 1080

Buffers en Misc stay default.

2048x1536 also seems to work, although view seems to be more 'zoomed' in.

Hikvision DS-2CD2332-I

2016-03-16T23:20:13Z

Thermionic: /* Videostream settings (for me): */

DS-2CD2332-I 3MP Outdoor Network Mini Dome Camera.
[http://overseas.hikvision.com/en/Products_accessries_159_i3668.html]

I bought this one [http://www.ebay.com/itm/Hikvision-DS-2CD2332-I-3MP-IP66-IR-EXIR-Turret-Outdoor-Network-Dome-Camera-POE-/111360908513 Hikvision DS-2CD2332-I 3MP IP66 IR EXIR Turret Outdoor Network Dome Camera POE].

I can confirm that the cam works with Zoneminder 1.26 on Ubuntu 14.04 using RTSP. The quality is rather poor: lower half of the screen is often blurred. Then I upgraded to Zoneminder 1.28 [https://launchpad.net/~iconnor/+archive/ubuntu/zoneminder PPA Isaac Connor] and chose RTP/RTSP and the cam is working fine. The installed package (seen with dpkg) is 1.28.0-trusty on amd64.

== Videostream settings (for me): ==

Source type ffmpeg, max 9 FPS and max 15 FPS (and maybe others, didn't try)

:Source Path : rtsp://user:password@192.0.2.1//Streaming/Channels/1

:Capture Width (pixels) : 1920
:Capture Height (pixels): 1080

Buffers en Misc stay default.

resolution to match what the camera has been set to

2688 × 1520
1920 x 1080
1280 x 720

Hikvision

2016-03-16T23:16:35Z

Thermionic: /* Model specific wikis */

These seem to work. The biggest problem is people trying to use 'network camera' instead of 'ffmpeg' source type. Both have rtsp but only ffmpeg works here (because of h.264?) see [[http://www.cctvforum.com/viewtopic.php?f=19&t=37034]]

The '''DS-2CD2732F-I''' and '''DS-2CD2032-I''' are tested.

[The DS-2CD2032-I's come in several different versions (Chinese, Int'l, English, etc...) each with multiple firmwares available. Be sure that you use the correct firmware for your camera model for best results.]

The '''DS-2CD2532F-IWS''' was tested to work reliably only with Libvlc as source type.

The '''DS-2CD2012-I''' works too.

The '''DS-2CD2632F-IS''' outdoor bullet seems to work using Ffmpeg as described below, 1920x1080x24bit @25fps

=== Videostream: ===

==== General Tab ====
:Source Type : Ffmpeg / Libvlc / Remote(only some FW revisions)
==== Source Tab ====
:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp
(example: rtsp://admin:12345@mycamera.mydomain.com//Streaming/Channels/1)
:Target Colorspace : 24 bit colour
:Capture Width (pixels) : 1280 (set these to match camera config)
:Capture Height (pixels) : 720

I also had to set max FPS slightly higher than set in camera, or i lost the lower half of the frame. (Camera seems to send 10.6fps when 10 is selected)

The following URL gives another Source path that was far more stable on Zoneminder 1.25: http://onlinetechadvice.blogspot.com/2014/04/hikvision-ds-2cd2032-i-working-in.html#comment-form

The Source path that worked for me is: rtsp://username:password@XXX.XXX.XXX.XXX:554/cam/realmonitor?channel=1&subtype=0?tcp
Of course, replace username and password and port with your specific installation information.

The "Remote" option also seems to work now in ZM 1.28 (at least with ds-2cd2032-i's of a certain firmware version), with less rtsp streaming errors than when using ffmpeg. The source path /Streaming/Channels/1 works fine with firmware version 5.1.6, but seems to not work any longer in 5.2.5. The source path /cam/realmonitor?channel=1&subtype=0 works on any firmware model. In ZM 1.28 (perhaps earlier as well), TCP is automatically forced when the "Remote" source type is chosen and RTP/RTSP is used (https://github.com/ZoneMinder/ZoneMinder/issues/323), so the trailing "?tcp" is not necessary for either URL when this configuration is used.

===Model specific wikis===

[[Hikvision_DS_2CD2732FIS|Hikvision DS-2CD2732F-I(S) Megapixel Outdoor IP Dome Camera]]

[[Hikvision_DS-2CD2532F-IWS|Hikvision DS-2CD2532F-IWS 3MP Outdoor IP Mini Dome Camera]]

[[Hikvision_DS-2CD2012-I|Hikvision DS-2CD2012-I 1.3MP IR Mini Bullet Camera]]

[[Hikvision_DS-2CD2332-I|Hikvision DS-2CD2332-I 3MP Outdoor Network Mini Dome Camera]]

For the [http://overseas.hikvision.com/en/Products_accessries_157_i3206.html DS-2CD2032-I] model, see the line above (the DS-2CD2332-I model).

[[Hikvision_DS-2CD2142FWD-I|Hikvision_DS-2CD2142FWD-I 4MP Mini Vandal Dome IP Camera PoE]]