ZoneMinder Wiki - User contributions [en]

Kodicom 4400r

2016-01-27T09:19:53Z

Tonyguards:

This card works a little different than the others. The inputs are not bound to any spacific bt878 chip but go through a crosspoint video switch. The way this works is you have inputs (channles) 0-15 and you can assign them to any of the video devices (bt878 chips /dev/video 0-3)
 /dev/video0 (3) assigns composit input 3 to the first device
 /dev/video1 (0) assigns composit input 0 to the second device etc...
More information can be obtained

For video display in ZonEMindeR, make sure you select "Video For Linux Version 1" and the proper resolution for the camera.

==Add a single card==
modprobe bttv gbuffers=16 card=133,132,133,133 tuner=4,4,4,4 
or 
edit your modprobe.conf (on modern linux distributions, the options below should be placed in /etc/modprobe.d/bttv.conf) to include 
options bttv gbuffers=16 card=133,132,133,133 tuner=4,4,4,4 
requires a 2.6.12 kernel but fully supported in a 2.6.13 
I tried and failed on the 2.6.12 but succeeded on the 2.6.13 

When using all 16 channels plug the additional BNC's onto the headers bearing in mind the first 4 are on the card.
but the order of the channels is
1,2,3,4,9,8,5,4,13,12,11,10,15,14,7,6

*James Wilson

It's very important to set: 
options -> config -> V4L_MULTI_BUFFER = '''disabled''' 
Otherwise, you will get half picture from one camera and half picture from other camera. 
and 
options -> config -> CAPTURES_PER_FRAME = '''4''' 
or something between 2 or 4, otherwise you could get two cameras swapping back and forth. 
 
[[File:Options_kodicom_zoneminder.PNG]] 

==Two Cards in a single box ****==
Two 4400r cards - labeled as se-120 (4 8778 chips/card). In an IBM 342 Server. FC4 

It is setup with : 
/dev/video0 channel 0 
/dev/video1 channel 1 
/dev/video2 channel 2 
/dev/video3 channel 3 

/dev/video4 channel 0 
/dev/video5 channel 1 
/dev/video6 channel 2 
/dev/video7 channel 3 

#modprobe.conf 
alias char-major-81 bttv 
options bttv gbuffers=32 card=0x85,0x84,0x85,0x85,0x85,0x84,0x85,0x85 tuner=4 

==If color cameras show black and white==
Adding chroma_agc=1 to your modprobe line might fix it.

Eg.

options bttv gbuffers=16 card=133,132,133,133 chroma_agc=1

Hardware Compatibility List

2013-07-22T07:46:30Z

Tonyguards:

Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

== bt8x8 Cards ==
A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

'''Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.'''

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== Network Cameras ==
For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.

Any network camera that allows access to single JPEG image grabs or '''some but not all''' multi-part JPEG feeds.

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[Apexis]] (APM-J011-WS, APM-J012-WS, possibly others)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] All

* [[Brickcom]] These have been tested

* [[BSTI]] Some

* [[Cisco]] some

* [[D-Link]] Most

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[Instar]] (IN-2905, possibly others)

* [[Level One]] some

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Rimax]] Some

* [[Rovio]]

* [[Sony]] Most

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[x-vision]] Xvision cameras by y3k

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* PLANET some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

*[[Edimax]] some

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== Network Digitizers ==

Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.

* [[Synectics E100]] encoder
*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: [[Logitech QuickCam Express]], QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the HCL [http://www.mpsmsc.com/recruitment-indonesia.html MSC Recruitment Indonesia]

== Links ==
* [http://www.mpsmsc.com/crewing-indonesia.html MSC Crewing Indonesia]
* [http://www.doxapest.co.id/index.php/pest-control-dan-anti-rayap Pest Control]
* [http://www.tokobungasabana.com Toko Bunga Online]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder

Hardware Compatibility List

2013-07-04T07:07:33Z

Tonyguards:

Anykeeper

2013-06-19T08:13:27Z

Tonyguards:

[[Image:anykeeper-low.jpg]]

I have the following line in /etc/modprobe.d/bttv.conf
options bttv card=131,131,131,131,131,131,131,131

or on a newer system (as .conf is deprecated)

/etc/modprobe.d/mycapturecard
options bttv card=131,131,131,131,131,131,131,131

I have 8x131 as I have 2 cards which I think is a WDT 2116. which gives me 16 inputs.

The only other thing in the main options under config I unticked STRICT_VIDEO_CONFIG.
[http://subconscious-therapy.com/hipnoterapi-surabaya/ Hipnoterapi Surabaya] | [http://littletods.com/en/content/4-perlengkapan-bayi Perlengkapan Bayi] | [http://www.pbtaxand.com/our-services/tax-advisory-services Konsultan Pajak] | [http://www.tiraimodern.com/product/vertical-blind Vertical Blind] | [http://www.tiraimodern.com/product/roller-blind Roller Blind]

Hardware Compatibility List

2013-06-14T06:13:38Z

Tonyguards:

Anykeeper

2013-06-13T07:01:17Z

Tonyguards:

Hardware Compatibility List

2013-05-13T06:10:20Z

Tonyguards:

Hardware Compatibility List

2013-05-13T06:09:49Z

Tonyguards:

Hardware Compatibility List

2013-04-25T06:31:56Z

Tonyguards:

Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the [http://www.zoneminder.com/forums/viewforum.php?f=10 Hardware Compatibility List] part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

== bt8x8 Cards ==
A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

'''Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.'''

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== Network Cameras ==
For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.

Any network camera that allows access to single JPEG image grabs or '''some but not all''' multi-part JPEG feeds.

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[Apexis]] (APM-J011-WS, APM-J012-WS, possibly others)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] All

* [[Brickcom]] These have been tested

* [[BSTI]] Some

* [[Cisco]] some

* [[D-Link]] Most

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[Instar]] (IN-2905, possibly others)

* [[Level One]] some

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Rimax]] Some

* [[Rovio]]

* [[Sony]] Most

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[x-vision]] Xvision cameras by y3k

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* PLANET some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

*[[Edimax]] some

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== Network Digitizers ==

Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.

* [[Synectics E100]] encoder
*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: [[Logitech QuickCam Express]], QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the HCL [http://www.mpsmsc.com/recruitment-indonesia.html MSC Recruitment Indonesia]

== Links ==
* [http://www.mpsmsc.com/crewing-indonesia.html MSC Crewing Indonesia]
* [http://www.doxapest.co.id/index.php/pest-control-dan-anti-rayap Pest Control]
* [http://www.tokobungasabana.com Toko Bunga Online]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder on it -> [http://plugcomputer.org/plugwiki/index.php/ZoneMinder PlugComputer Wiki Zoneminder Howto]

Kodicom 4400r

2013-04-25T06:30:48Z

Tonyguards:

This card works a little different than the others. The inputs are not bound to any spacific bt878 chip but go through a crosspoint video switch. The way this works is you have inputs (channles) 0-15 and you can assign them to any of the video devices (bt878 chips /dev/video 0-3)
 /dev/video0 (3) assigns composit input 3 to the first device
 /dev/video1 (0) assigns composit input 0 to the second device etc...
More information can be obtained at [http://vamostech.com/gps-tracking GPS Tracking]

For video display in ZonEMindeR, make sure you select "Video For Linux Version 1" and the proper resolution for the camera.

==Add a single card==
modprobe bttv gbuffers=16 card=133,132,133,133 
or 
edit your modprobe.conf (on modern linux distributions, the options below should be placed in /etc/modprobe.d/bttv.conf) to include 
options bttv gbuffers=16 card=133,132,133,133 
requires a 2.6.12 kernel but fully supported in a 2.6.13 
I tried and failed on the 2.6.12 but succeeded on the 2.6.13 

When using all 16 channels plug the additional BNC's onto the headers bearing in mind the first 4 are on the card.
but the order of the channels is
1,2,3,4,9,8,5,4,13,12,11,10,15,14,7,6

*James Wilson

==Two Cards in a single box ****==
Two 4400r cards - labeled as se-120 (4 8778 chips/card). In an IBM 342 Server. FC4 

It is setup with : 
/dev/video0 channel 0 
/dev/video1 channel 1 
/dev/video2 channel 2 
/dev/video3 channel 3 

/dev/video4 channel 0 
/dev/video5 channel 1 
/dev/video6 channel 2 
/dev/video7 channel 3 

#modprobe.conf 
alias char-major-81 bttv 
options bttv gbuffers=32 card=0x85,0x84,0x85,0x85,0x85,0x84,0x85,0x85 tuner=4 

==If color cameras show black and white==
Adding chroma_agc=1 to your modprobe line might fix it.

Eg.

options bttv gbuffers=16 card=133,132,133,133 chroma_agc=1

Hardware Compatibility List

2013-04-23T03:08:40Z

Tonyguards:

Hardware Compatibility List

2013-04-05T03:51:39Z

Tonyguards:

Hardware Compatibility List

2013-03-04T03:39:07Z

Tonyguards:

Hardware Compatibility List

2013-02-25T04:22:09Z

Tonyguards:

Hardware Compatibility List

2013-02-18T06:07:12Z

Tonyguards:

Hardware Compatibility List

2013-02-11T08:49:52Z

Tonyguards:

Hardware Compatibility List

2013-02-05T03:30:43Z

Tonyguards:

Kodicom 4400r

2013-01-25T03:15:47Z

Tonyguards:

This card works a little different than the others. The inputs are not bound to any spacific bt878 chip but go through a crosspoint video switch. The way this works is you have inputs (channles) 0-15 and you can assign them to any of the video devices (bt878 chips /dev/video 0-3)
 /dev/video0 (3) assigns composit input 3 to the first device
 /dev/video1 (0) assigns composit input 0 to the second device etc...
More information can be obtained at [http://vamostech.com/gps-tracking GPS Tracking]

For video display in ZonEMindeR, make sure you select "Video For Linux Version 1" and the proper resolution for the camera.

==Add a single card==
modprobe bttv gbuffers=16 card=133,132,133,133 
or 
edit your modprobe.conf (on modern linux distributions, the options below should be placed in /etc/modprobe.d/bttv.conf) to include 
options bttv gbuffers=16 card=133,132,133,133 
requires a 2.6.12 kernel but fully supported in a 2.6.13 
I tried and failed on the 2.6.12 but succeeded on the 2.6.13 

When using all 16 channels plug the additional BNC's onto the headers bearing in mind the first 4 are on the card.
but the order of the channels is
1,2,3,4,9,8,5,4,13,12,11,10,15,14,7,6

*James Wilson

==Two Cards in a single box ****==
Two 4400r cards - labeled as se-120 (4 8778 chips/card). In an IBM 342 Server. FC4 

It is setup with : 
/dev/video0 channel 0 
/dev/video1 channel 1 
/dev/video2 channel 2 
/dev/video3 channel 3 

/dev/video4 channel 0 
/dev/video5 channel 1 
/dev/video6 channel 2 
/dev/video7 channel 3 

#modprobe.conf 
alias char-major-81 bttv 
options bttv gbuffers=32 card=0x85,0x84,0x85,0x85,0x85,0x84,0x85,0x85 tuner=4 

==If color cameras show black and white==
Adding chroma_agc=1 to your modprobe line might fix it.

Eg.

options bttv gbuffers=16 card=133,132,133,133 chroma_agc=1

Hardware Compatibility List

2013-01-22T03:43:45Z

Tonyguards:

Linksys

2013-01-21T05:59:17Z

Tonyguards:

WVC-210 PTZ

remote host path = /img/video.mjpeg

[http://www.goldenfibreglass.com/product-atap-fiberglass.php Atap Fiberglass] | [http://www.goldenfibreglass.com/product-tangki-fiberglass.php Tangki Fiberglass]

WVC2300 / PVC2300

A few options for these cameras:

*Base hit uses still image snapshots:
**Remote Host Name: user:password@ip.ad.dr.ess
**Remote Host Path: img/snapshot.cgi?size=3&quality=1
***size=1-3 (160x120, 320x240, 640x480)
***quality=1-5(very high - very low)
*Even better solution is to use pushed jpegs:
**Remote Host Name: user:password@ip.ad.dr.ess
**Remote Host Path: img/mjpeg.jpg
**Use the web administration UI for the camera to set size, quality and framerate throttling
*Would like to use ffmpeg, however this seems to be giving problems - partial image scans etc
**Source Path: http://user:password@ip.ad.dr.ess/img/video.asf
**Seems to use size and quality settings from the administration website
*What doesnt work
**img/video.mjpeg (and other similar urls). Generally barfs on zm_remote_camera_http.cpp:134, and I cant be bothered debugging it.
*Other notes
**See NetcamMjpegStreamDumps for information from the 'motion' application (scroll down to Linksys WVC54G which gave me some hints)

WVC54GC

*Source Type: ffmpeg
*Source Path: http://##.##.##.##/img/mjpeg.cgi

[[Category:Network Cameras]]

Anykeeper

2013-01-21T05:57:36Z

Tonyguards:

Hardware Compatibility List

2013-01-16T02:56:49Z

Tonyguards: /* Links */

Hardware Compatibility List

2013-01-14T03:43:03Z

Tonyguards:

Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the [http://www.zoneminder.com/forums/viewforum.php?f=10 Hardware Compatibility List] part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

== bt8x8 Cards ==
A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

'''Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.'''

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== Network Cameras ==
For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.

Any network camera that allows access to single JPEG image grabs or '''some but not all''' multi-part JPEG feeds.

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[Apexis]] (APM-J011-WS, APM-J012-WS, possibly others)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] All

* [[Brickcom]] These have been tested

* [[BSTI]] Some

* [[Cisco]] some

* [[D-Link]] Most

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[Instar]] (IN-2905, possibly others)

* [[Level One]] some

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Rimax]] Some

* [[Rovio]]

* [[Sony]] Most

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[x-vision]] Xvision cameras by y3k

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* PLANET some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

*[[Edimax]] some

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== Network Digitizers ==

Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.

* [[Synectics E100]] encoder
*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: [[Logitech QuickCam Express]], QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the HCL [http://www.mpsmsc.com/recruitment-indonesia.html MSC Recruitment Indonesia]

== Links ==
* [http://www.mpsmsc.com/crewing-indonesia.html MSC Crewing Indonesia]
* [http://www.doxapest.co.id/index.php/pest-control-dan-anti-rayap Pest Control]
* [http://www.tokobungasabana.com Toko Bunga]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder on it -> [http://plugcomputer.org/plugwiki/index.php/ZoneMinder PlugComputer Wiki Zoneminder Howto]

Hardware Compatibility List

2013-01-10T03:57:44Z

Tonyguards:

Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the [http://www.zoneminder.com/forums/viewforum.php?f=10 Hardware Compatibility List] part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]]

[[Hauppauge]]

[[Ituner Spectra 8]]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]]
[[ Bluecherry - BC-H16480A]]
[[TView 95/99]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

== bt8x8 Cards ==
A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

'''Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.'''

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== Network Cameras ==
For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.

Any network camera that allows access to single JPEG image grabs or '''some but not all''' multi-part JPEG feeds.

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[Apexis]] (APM-J011-WS, APM-J012-WS, possibly others)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] All

* [[Brickcom]] These have been tested

* [[BSTI]] Some

* [[Cisco]] some

* [[D-Link]] Most

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[Instar]] (IN-2905, possibly others)

* [[Level One]] some

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Rimax]] Some

* [[Rovio]]

* [[Sony]] Most

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[x-vision]] Xvision cameras by y3k

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* PLANET some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

*[[Edimax]] some

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== Network Digitizers ==

Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.

* [[Synectics E100]] encoder
*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: [[Logitech QuickCam Express]], QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the HCL [http://www.mpsmsc.com/recruitment-indonesia.html MSC Recruitment Indonesia]

== Links ==
* [http://www.mpsmsc.com/crewing-indonesia.html MSC Crewing Indonesia]
* [http://www.doxapest.co.id/index.php/pest-control-dan-anti-rayap Pest Control]
* [http://www.tokobungasabana.com Toko Bunga]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder on it -> [http://plugcomputer.org/plugwiki/index.php/ZoneMinder PlugComputer Wiki Zoneminder Howto]

Linksys

2013-01-09T02:35:20Z

Tonyguards:

Anykeeper

2013-01-09T02:32:17Z

Tonyguards:

Hardware Compatibility List

2012-12-13T07:33:38Z

Tonyguards:

Zoneminder will work with almost any capture card that is supported by the linux kernel. You may find additional details about supported hardware in the [http://www.zoneminder.com/forums/viewforum.php?f=10 Hardware Compatibility List] part of the forums. Also if you find something in the forums that is missing from the wiki ADD IT.

== Capture Cards ==

[[Anykeeper]]

[[Avermedia]]

[[Camsecure PCI Express video capture]]

[[Digiflower]]

[[Geovision GV250 - bt878a chip]]

[[Grandtec Grand X Guard]] [http://www.grandtec.com/products/surveillance/xguard.html]

[[Hauppauge]]

[[Ituner Spectra 8]] [http://www.ituner.com/spectra.htm]

[[Kodicom 4400r]]

[[Kodicom 8800]]

[[Tungson TE-8008]]

Leadtek WinFast VC 100 - the cheapest bt878 model with no tuner on it, just Com/Svideo in.

[[LinkDelight CCTV H.264 4CH DVR Card]]

[[Linux Media Labs LMLBT44]] [http://www.linuxmedialabs.com]

[[Osprey 100]]

[[Provideo PV- series (Bluecherry)]] [http://store.bluecherry.net/SearchResults.asp?Cat=63&Click=51]

[[ Bluecherry - BC-H16480A]] [http://store.bluecherry.net/products/Bluecherry-BC%252dH16480A-%252d-16-port-video%2C-16-port-audio-H.264-%7B47%7D-PCIe-hardware-compression-capture-card.html]

[[TView 95/99]]

[[Videocards with Philips saa7134 chipset]]

[[WinFast TV2000 XP]]

[[Rapid OS]]

== bt8x8 Cards ==
A note on the bt8x8-based TV-tuner cards: these usually have beside the tuner input, also a Composite and an S-Video input. You can hook up 2 analog cameras to these, and access from ZoneMinder both of them as individual cameras, at max 15Fps. You don't need two separate TV cards for two cameras!

[[Pico2000]] - 4 port card, one chip bt878, around 2 fps when using all channels

[[Bt878_4chip_8inputs]] -4 chips bt878, 8 inputs, around 5 fps when using 2 inputs per chip

[[:Image:Karta.jpg| bt878 8 chip 8 input]] - This card is supplied with D-sub to 8 BNC connector and uses the bt878 chip for each input allowing full frame rates and quality. See [[Kodicom 8800]] for more information.

Geovision GV250 bt878a single chip 4 inputs - This capture Card is supplied with 4 video inputs but with NO audio channel

'''Most other BTTV (bt878, bt848) cards, see /usr/src/linux/Documentation/video4linux/bttv/CARDLIST on your system for a list of some of them.'''

== Analog Cameras ==

Any regular composite or S-video camera connected via a supported capture card. Some analog cameras feature camera control - ZM supports several of these camera's Pan/Tilt/Zoom functions via serial port control, as well as camera Presets, Focus, Iris, etc.
*[[PicturetelControlScript | PictureTel PTZ2N]].

== Network Cameras ==
For Network Cams to work they need to be able to stream MJPEG without the requirement of activex controls. If you see the requirement for the camera calls for IE then there is a good chance it may not work. The other option is to grab JPEG images if the camera supports that option which will work but at a lower frame rate.

Any network camera that allows access to single JPEG image grabs or '''some but not all''' multi-part JPEG feeds.

'''Full Compatibility '''

* [[7Links]](TM Trade Mark)

* [[A-mtk]]

* [[Abus]] some

* [[Airlink 101]] some

* [[Apexis]] (APM-J011-WS, APM-J012-WS, possibly others)

* [[ArecontVision]] (AV3130M, probably other too)

* [[Astak Mole]] Some

* [[Axis]] All

* [[Brickcom]] These have been tested

* [[BSTI]] Some

* [[Cisco]] some

* [[D-Link]] Most

* [[Foscam]] (FI8908W, FI8904W, possibly others)

* [[Gadspot]] Most

* [[Generic]] Only tested one

* [[Geovision]] (GV-FE420, possibly others)

* [[hootoo]] Some

* [[Iguard]] IP390E

* [[Instar]] (IN-2905, possibly others)

* [[Level One]] some

* [[Linksys]] WVC-210 / WVC2300 / PVC2300 / WVC54GC

* [[Loftek]] Sentinel PTZ

* [[Maygion]] (IP-603, IP-604, possibly others)

* [[Rimax]] Some

* [[Rovio]]

* [[Sony]] Most

* [[TP-LINK]] Some

* [[Trendnet]] Most

* [[Wanscam]] FR4020A2 (Foscam clone)

* [[x-vision]] Xvision cameras by y3k

* [[Y-Cam]] (Sharx Ip) Most

* [[Zavio]] Some

* [[Zecumate]] JPT3815W

* Remote systems, themselves running zoneminder, can be accessed as cameras using the Remote Path of '''/cgi-bin/nph-zms?mode=single&monitor=1&scale=100&maxfps=5&buffer=1000''' - where the monitor number is the correct camera on the remote system.

'''Single Jpeg Only'''

* [[Airlink 101]] some

* [[JVC]] some

* [[Panasonic]] some

* PLANET some

*[[Toshiba]] some

* [[Veo Observer IP NetCam]] most

*[[Vivotek]] All

'''Mpeg(ver1.24.0 and up)'''

*[[ABS_MegaCam]]

* [[Axis]] All

* [[ ACTi]] All

*[[Vivotek]] Most

'''Compatible with modifications'''

*[[Aviosys]] some

* [[Mobotix]] all

*[[Edimax]] some

* [[Conceptronic]] some

'''Compatible with problems'''

* [[Compro]] IP70. MPEG4 only, some reliability issues and general poor firmware quality.

* [[Grandtec]] [[Grandtec_WLAN_Camera|WLAN Camera]] WiFi or III - acceptable indoor quality, no infrared-filter (better nightvision) cheap!

* [[Intellinet]] IPCamera with the new firmware.

* Old Intellinet IPCamera (model MWNC-100) with this (http://www.zoneminder.com/forums/viewtopic.php?t=7500) protocol adapter.

* OvisLink AirLive WL-5400CAM

Useful link: Flash's IP Camera Database, with Zoneminder compatibility guide: http://digdilem.org/cameras

== Network Digitizers ==

Like Network Cameras, these devices produce a video stream - but they accept an analog video input from a camera or other video source.

* [[Synectics E100]] encoder
*The [[IP9100 | Aviosys IP9100, Models A, B and Plus]] has four analog video inputs. It produces a ZM compatible video stream from one of the inputs, which is selectable via an HTTP GET command. There might even be a control script for ZM that lets you select the active video input using ''ZM's Camera Control Presets!''

With the yoics Aviosys 9100 firmware at http://www.yoics.com/?p=28, ZoneMinder can directly access all four ports via /usr/yoicsX.jpg as the remote host path, where X is 0 - 3.

== USB Cameras ==

*Just Zoom USB cam

*Creative Webcam Pro, Webcam 3, LIVE! Cam OPTIA PRO (V4L2, Chan 0, PAL, YUYV)

*''Most'' UVCvideo cameras, including: [[Logitech QuickCam Express]], QuickCam Pro 3000, [[QuickCam Pro 4000]], QuickCam Communicate STX/Deluxe, [[Logitech Webcam Pro 9000]], and [[Webcam C250]]

*Logitech Quickcam Orbit/Sphere (experimental basic pan/tilt control has also published for testing and hacking [http://www.zoneminder.com/forums/viewtopic.php?t=9788])

*[[Philips]]

*Any OV511 based USB camera [http://alpha.dyndns.org/ov511/cameras.html]

*Any CPIA based USB camera [http://webcam.sourceforge.net]

*[[LabTec WebCam Pro]]

*Confirmed basic functionality with Microsoft Lifecam VX 5000 using UVC Streaming method

Note that most USB cameras that can use Video4Linux/V4L2, and so can be used by ZoneMinder. Some have older chipsets and can be hard to find new.

Note that PWC drivers are not included in the kernel. Some distribution's add them in and other may not. Here are some relevant links:
* [http://www.smcc.demon.nl/webcam/ Old Maintainer]
* [http://www.saillard.org/linux/pwc/ Current PWC Maintainer]

== X10 Devices ==
The only device that really needs to be compatable with ZM is the Transceiver, all other x10 devices comunicate through that device.
*[[CM11]] Bi-Directional Transceiver

Other X10 notes:

[http://www.zoneminder.com/forums/viewtopic.php?t=6423&highlight=x10 Topic 6423]

[http://www.zoneminder.com/forums/viewtopic.php?t=7082&highlight=x10 Topic 7082]

== All other hardware as supported by Linux ==
To find out if your hardware is supported, check the HCL at [http://www.linuxquestions.org/hcl/ linuxquestions.org]

[http://kmuto.jp/debian/hcl/ Debian]

[http://fedoraproject.org/wiki/HCL Fedora] [http://fedora-linux.nl/wiki/index.php/HCL Fedora Unofficial HCL]

[http://www.mandriva.com/hardware Mandriva]

[https://hardware.redhat.com/index.cgi RedHat]

[http://en.opensuse.org/Hardware Suse]

[http://doc.gwos.org/index.php/HCL Ubuntu]

== Links ==
* [http://www.macmanitou.de/mediawiki/index.php?title=Webcam_Manufacturer_Data Manufacturer Data]
* [http://www.doxapest.co.id/index.php/pest-control-dan-anti-rayap Pest Control]
* [http://www.tokobungasabana.com Toko Bunga]

== Plug Computers ==
Guruplug Server Plus -> How to install Zoneminder on it -> [http://plugcomputer.org/plugwiki/index.php/ZoneMinder PlugComputer Wiki Zoneminder Howto]