Hikvision

2020-09-28T08:53:42Z

Wolterhv: /* About */ Changed format of list, to make it more readable. Added model DS-2DE3204W-DE.

=== Models ===

* [[Hikvision DS-2CD1631FWD-I CCTV POE 3MP HD Varifocal IR Bullet]]

* [[Hikvision_DS_2CD2732FIS|Hikvision DS-2CD2732F-I(S) Megapixel Outdoor IP Dome Camera]]

* [[Hikvision_DS-2CD2532F-IWS|Hikvision DS-2CD2532F-IWS 3MP Outdoor IP Mini Dome Camera]]

* [[Hikvision_DS-2CD2012-I|Hikvision DS-2CD2012-I 1.3MP IR Mini Bullet Camera]]

* [[Hikvision_DS-2CD2332-I|Hikvision DS-2CD2332-I 3MP Outdoor Network Mini Dome Camera]]

* [[Hikvision_DS-2CD2022WD-I|Hikvision DS-2CD2022WD-I]]

*[[Hikvision_DS-2CD2025FWD-I | Hikvision DS-2CD2025FWD-i 1920x1080 30FPS Bullet]]

* [[Hikvision DS-2CD2142FWD-I|Hikvision DS-2CD2142FWD-I 4MP Mini Vandal Dome IP Camera PoE]]

* [[Hikvision DS-7204-7208-7216HVI-ST‎‎ | Hikvision DS-7204-7208-7216HVI-ST‎‎ IP Video Encoder DVR]] - Supports HD-TVI, Analog, and IP Cameras (has errors)

* [[Hikvision Video Doorbell DS-KB6003-WIP]]

* [[Hikvision DS-2DE2A404IW-DE3]]

* [[Hikvision DT2A404]]

* [[ Hikvision DS-2CD2532F-IS ]]

For the [http://overseas.hikvision.com/en/Products_accessries_157_i3206.html DS-2CD2032-I] model, see the the DS-2CD2332-I model.

=== About ===

These seem to work. The biggest problem is people trying to use 'network camera' instead of 'ffmpeg' source type. Both have rtsp but only ffmpeg works here (because of h.264?) see [[http://www.cctvforum.com/viewtopic.php?f=19&t=37034]]

{|class="wikitable"
!Model
!Comment
|-
| DS-2CD2055FWD-I bullet
| Works with ZM 1.30.4 with Ffmpeg
|-
| DS-2CD2632F-IS Update Version outdoor bullet
| Works with ZM 1.30.4 ONVIF works for fast setup. See Model Specific Wiki page Hikvision DS-2CD1631FWD-I CCTV POE 3MP HD Varifocal IR Bullet
|-
| DS-2CD2732F-I
| Tested.
|-
| DS-2CD2032-I
| Tested. The DS-2CD2032-I's come in several different versions (Chinese, Int'l, English, etc...) each with multiple firmwares available. Be sure that you use the correct firmware for your camera model for best results.
|-
| DS-2CD2035-I outdoor bullet
| Works using Ffmpeg.
|-
| DS-2CD2532F-IWS
| Tested to work reliably only with Libvlc as source type.
|-
| DS-2CD2012-I
| Works.
|-
| DS-2CD2085FWD-I
| Works
|-
| DS-2DE3204W-DE
| At least pan, tilt and focus (to min. or max.) work in ZM 1.34. Used ffmpeg for capture and HikVision protocol for control.
|}

You can add some flags to the stream. An example is in the [http://forums.zoneminder.com/viewtopic.php?f=30&t=21651 forum] where ?tcp is added to the end of the stream to reduce artifacts.

=== Videostream: ===

== Hikvision DS-2DE2A404IW-DE3 ==
The Model Hikvision DT2A404 is a OEM version of the Hikvision DS-2DE2A404IW-DE3
IP after reset is 192.168.1.64

The following configuration is a example that is tested Zoneminder 1.32.3 but is expected to work with other versions, too.
The easy way ist to use the ONVIF Probe button in the upper right corner of each "Monitor" window.

In general, use the following configuration:
{| class="wikitable"
! style="text-align:center;" | Config Tab
! Option
! Config Setting
|-
|General
|Source Type
|Ffmpeg
|-
|rowspan="8"|Source
|Source Path
|to access the mainstream:
:rtsp://user:yourpassword@192.168.1.64:554/ch1/main/av_stream
:example: rtsp://admin:yourpassword@192.168.1.64:554/ch1/main/av_stream
or
rtsp://user:yourpassword@192.168.1.64:554/Streaming/Channels/101?transportmode=mcast&profile=Profile_1

:
to access the substream:
:rtsp://192.168.0.1:554/ch1/sub/av_stream
:example: rtsp://admin:yourpassword@192.168.1.64:554/ch1/sub/av_stream
|-
|Remote Method
|TCP or UDP
|-
|Target Colorspace
|32 bit colour
|-
|Capture Width (pixels)
|2560
|-
|Capture Height (pixels)
|1440
|-
|Preserve Aspect Ratio
|Unselected
|-
|Orientation
|Normal
|-
|Deinterlacing
|Disabled
|-
|rowspan="8"|Control
|-
|Control Type
|HikVision
|-
|Control Device (necessary for ptz,enter the exact camera model
|DS-2DE2A404IW-DE3
|-
|Control Address
|user:yourpassword@192.168.1.64
|-
|within the Hikvision Control Type: Protocol
|HikVision
|-
|}

==== General Tab ====
:Source Type : Ffmpeg / Libvlc / Remote(only some FW revisions)
==== Source Tab ====
:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp
(example: rtsp://admin:12345@mycamera.mydomain.com//Streaming/Channels/1)
:Target Colorspace : 24 bit colour
:Capture Width (pixels) : 1280 (set these to match camera config)
:Capture Height (pixels) : 720

I also had to set max FPS slightly higher than set in camera, or i lost the lower half of the frame. (Camera seems to send 10.6fps when 10 is selected)

The following URL gives another Source path that was far more stable on Zoneminder 1.25: http://onlinetechadvice.blogspot.com/2014/04/hikvision-ds-2cd2032-i-working-in.html#comment-form

The Source path that worked for me is: rtsp://username:password@XXX.XXX.XXX.XXX:554/cam/realmonitor?channel=1&subtype=0?tcp
Of course, replace username and password and port with your specific installation information.

The "Remote" option also seems to work now in ZM 1.28 (at least with ds-2cd2032-i's of a certain firmware version), with less rtsp streaming errors than when using ffmpeg. The source path /Streaming/Channels/1 works fine with firmware version 5.1.6, but seems to not work any longer in 5.2.5. The source path /cam/realmonitor?channel=1&subtype=0 works on any firmware model. In ZM 1.28 (perhaps earlier as well), TCP is automatically forced when the "Remote" source type is chosen and RTP/RTSP is used (https://github.com/ZoneMinder/ZoneMinder/issues/323), so the trailing "?tcp" is not necessary for either URL when this configuration is used.

==Issues==
* It's recommended to use ZM 1.34 (or the most up to date stable (even numbered) branch), as older ZMs may lack compatibility. e.g. 1.30.4 w/ffmpeg will fail, yet 1.34 w/ffmpeg will work with the streams.

== See Also ==

*[https://forums.zoneminder.com The forum] has multiple posts regarding Hikvision. Search there for more details.

ZoneMinder Wiki - User contributions [en]

Hikvision