View source for Geovision GV250 - bt878a chip

From ZoneMinder Wiki

← Geovision GV250 - bt878a chip

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

The Geovision Capture Card GV250 was successfully set up using the card number 157 which then gave four channels 0-3 with just the one 878a chip on board.

This was set up in the etc/modprobe.d directory with a file options.conf

Will post the exact file contents shortly

Return to Geovision GV250 - bt878a chip.

Retrieved from "http://wiki.staging.zoneminder.com/Geovision_GV250_-_bt878a_chip"

Navigation menu