ACTi - Revision history

Novarlynx: Added RTSP settings for ACTI ACM cameras, such as my ACM 3401s.

2023-01-21T03:52:14Z

Added RTSP settings for ACTI ACM cameras, such as my ACM 3401s.

← Older revision		Revision as of 23:52, 20 January 2023
Line 30:		Line 30:
	ACM family, they all worked.		ACM family, they all worked.

			== ACTi ACM 3401 (RTSP), works for other ACM series cameras ==

			'''In ACTI camera video settings:'''

			Streaming Method = RTP Over UDP

			RTSP Authen Enable: checked

			B2 Frame Enable: unchecked (Important!)

			Strongly recommend changing Root password (User Account screen) from default!

			'''In ZM Monitor config'''
			Source type = Remote

			Protocol = RTSP

			Method = RTSP/Unicast

			Host Name = user:pass@address (default user:pass = admin:123456)

			Port = 7070 (camera's default)

			Path = leave blank

			Target colourspace = 24 bit colour

			Capture Resolution = 1280 x 1024 (or whatever your camera is set to)

			Preserve aspect ratio: unchecked

	== ACTi D32 ==		== ACTi D32 ==

Stevegilvarry at 08:03, 22 May 2016

2016-05-22T08:03:18Z

← Older revision		Revision as of 04:03, 22 May 2016
Line 54:		Line 54:

	Deinterlacing: Disabled		Deinterlacing: Disabled

			== ACTi TCM-5611 working setup ==

			I could only get the streaming unicast from the camera working with VLC but not with Zoneminder so I went the HTTP route.

			Using the camera's web configurator page, I first set the camera to 640x480, MJPEG.

			Then created a device in Zoneminder.

			Source: remote

			protocol: HTTP

			FPS: blank

			max FPS: blank

			640x480


			address: user:password@xxx.xxx.xxx.xxx

			path: /cgi-bin/cmd/system?GET_STREAM

			=== RTP B2 Frames ===

			Some ACTi cameras, including the KCM-5611 and B95, have a proprietary feature which injects "B2 Frames" (an ACTi-proprietary data blob containing timestamps and other info) into the MJPEG stream. If this feature is enabled, neither ZoneMinder nor browsers like Firefox and Chrome will be able to decode the MJPEG stream from the camera. On some cameras this option is enabled by default; to disable the B2 frames, go to the Network->RTP page in the camera's Web Configurator and un-check the RTP B2 Frame option.

C.huchel: /* ACM 5611 D32 */

2014-02-18T23:09:47Z

ACM 5611 D32

← Older revision		Revision as of 19:09, 18 February 2014
Line 29:		Line 29:

	ACM family, they all worked.		ACM family, they all worked.


			== ACTi D32 ==

			HTTP support buggy in the D32. Use RTSP.

			Remote Method: RTP/RTSP

			Remote host name: user:pass@host

			Remote Host Port: 7070 (this is the default port for the factory configuration. can be changed in Network menu)

			Remote Host Path: (leave empty)

			Target Colorspace 24 bit color

			Capture Width: (set the same as camera's config)

			Capture Height: (set the same as camera's config)

			Preserve Aspect Ratio: unchecked

			Orientation: (set to whatever you need/like)

			Deinterlacing: Disabled

Kp4djt: /* ACM 5611 */

2013-07-22T23:30:10Z

ACM 5611

← Older revision		Revision as of 19:30, 22 July 2013
Line 3:		Line 3:

	This is the setup I am using for the ACM 5611		This is the setup I am using for the ACM 5611

	Source type = remote		Source type = remote

	Remote Protocol = HTTP		Remote Protocol = HTTP

	Remote Method = Simple		Remote Method = Simple

	Remote Host Name = login:pwd@IP_address		Remote Host Name = login:pwd@IP_address

	Remote Port = 80		Remote Port = 80

	Remote Host Path = /cgi-bin/cmd/encoder?GET_STREAM		Remote Host Path = /cgi-bin/cmd/encoder?GET_STREAM

	Remote Image Colours = 24 bit colour		Remote Image Colours = 24 bit colour

	Capture Width 1280		Capture Width 1280

	Capture Height 720 (also used 1024)		Capture Height 720 (also used 1024)


	Those were all I set and it came right up.		Those were all I set and it came right up.


	I have used this same format with other cameras of the		I have used this same format with other cameras of the

	ACM family, they all worked.		ACM family, they all worked.

Kp4djt: I do not like the fact that you need i.e. for some admin functions, but the cameras do work well.

2013-07-22T23:29:27Z

I do not like the fact that you need i.e. for some admin functions, but the cameras do work well.

New page

== ACM 5611 ==

This is the setup I am using for the ACM 5611
Source type = remote
Remote Protocol = HTTP
Remote Method = Simple
Remote Host Name = login:pwd@IP_address
Remote Port = 80
Remote Host Path = /cgi-bin/cmd/encoder?GET_STREAM
Remote Image Colours = 24 bit colour
Capture Width 1280
Capture Height 720 (also used 1024)

Those were all I set and it came right up.

I have used this same format with other cameras of the
ACM family, they all worked.