ArecontVision - Revision history

Snake at 02:50, 27 November 2016

2016-11-27T02:50:50Z

← Older revision		Revision as of 22:50, 26 November 2016
Line 1:		Line 1:
	== ArecontVision ==		== ArecontVision ==


			=== [https://wiki.zoneminder.com/AV10115DN AV10115DN] ===


	=== AV3130M ===		=== AV3130M ===

Svrkispm: added patch to make camera work

2011-07-25T09:21:40Z

added patch to make camera work

← Older revision		Revision as of 05:21, 25 July 2011
Line 18:		Line 18:
	Resolution in zoneminder is set to 1280x1024.		Resolution in zoneminder is set to 1280x1024.

	Have on mind, that camera ~~remonte~~ path is always set to same value with 2048x1536 resolution in it and actually downloaded file have different resolutions!		Have on mind, that camera remote path is always set to same value with 2048x1536 resolution in it and actually downloaded file have different resolutions!

			=== Additional Notes ===
			After installation, this camera was sending only blue picture. The ZoneMinder version used was 1.24.4. I have found this patch in the [http://www.zoneminder.com/forums/viewtopic.php?f=21&t=17869&hilit=blue&start=0 FORUM] :

			<code>
			Index: src/zm_remote_camera_http.cpp
			===================================================================
			--- src/zm_remote_camera_http.cpp (revision 3475)
			+++ src/zm_remote_camera_http.cpp (working copy)
			@@ -451,9 +451,12 @@
			int buffer_len = ReadData( buffer );
			if ( buffer_len == 0 )
			{
			+ if ( mode == MULTI_IMAGE )
			+ {
			Error( "Connection dropped by remote end" );
			return( 0 );
			}
			+ }
			else if ( buffer_len < 0 )
			{
			Error( "Unable to read content" );
			@@ -982,9 +985,12 @@
			int buffer_len = ReadData( buffer );
			if ( buffer_len == 0 )
			{
			+ if ( mode == MULTI_IMAGE )
			+ {
			Error( "Connection dropped by remote end" );
			return( 0 );
			}
			+ }
			else if ( buffer_len < 0 )
			{
			Error( "Unable to read content" );

Svrkispm: typo

2011-06-21T16:03:43Z

typo

← Older revision		Revision as of 12:03, 21 June 2011
Line 3:		Line 3:
	=== AV3130M ===		=== AV3130M ===
	Manual [http://www.arecontvision.com/index.php?section=downloads&id=26]		Manual [http://www.arecontvision.com/index.php?section=downloads&id=26]
	~~Thic~~ camera has two sensors:		This camera has two sensors:
	- Color sensor: 2048(H) x 1536(V) pixel array (0.2 Lux @ F1.4)		- Color sensor: 2048(H) x 1536(V) pixel array (0.2 Lux @ F1.4)
	- B/W sensor: 1280(H) x 1024(V) pixel array (0 Lux, IR sensitive)		- B/W sensor: 1280(H) x 1024(V) pixel array (0 Lux, IR sensitive)

Svrkispm: added manual for camera

2011-06-21T16:01:18Z

added manual for camera

← Older revision		Revision as of 12:01, 21 June 2011
Line 2:		Line 2:

	=== AV3130M ===		=== AV3130M ===
			Manual [http://www.arecontvision.com/index.php?section=downloads&id=26]
	Thic camera has two sensors:		Thic camera has two sensors:
	- Color sensor: 2048(H) x 1536(V) pixel array (0.2 Lux @ F1.4)		- Color sensor: 2048(H) x 1536(V) pixel array (0.2 Lux @ F1.4)

Svrkispm: Some info about cameras...

2011-06-21T13:58:30Z

Some info about cameras...

New page

== ArecontVision ==

=== AV3130M ===
Thic camera has two sensors:
- Color sensor: 2048(H) x 1536(V) pixel array (0.2 Lux @ F1.4)
- B/W sensor: 1280(H) x 1024(V) pixel array (0 Lux, IR sensitive)

I have set up in zoneminder two monitors (cameras). First is working in day conditions and second is working on night conditions.

First camera remonte path:
image?res=full&x0=0&y0=0&x1=2048&y1=1536&quality=21&doublescan=0
Resolution in zoneminder is set to 2048x1536.

Second (night, BW) camera remonte path:
image?res=full&x0=0&y0=0&x1=2048&y1=1536&quality=21&doublescan=0
Resolution in zoneminder is set to 1280x1024.

Have on mind, that camera remonte path is always set to same value with 2048x1536 resolution in it and actually downloaded file have different resolutions!