Brickcom - Revision history

Kp4djt at 04:21, 7 June 2011

2011-06-07T04:21:06Z

← Older revision		Revision as of 00:21, 7 June 2011
Line 1:		Line 1:
			Brickcom was very forthcoming with the path to the video sources,
			they made finding the video a lot faster.

	== WCB-100a ==		== WCB-100a ==
	This camera is 802.11 b/g/n (at least b/g)		This camera is 802.11 b/g/n (at least b/g)

Kp4djt at 04:19, 7 June 2011

2011-06-07T04:19:13Z

← Older revision		Revision as of 00:19, 7 June 2011
Line 2:		Line 2:
	This camera is 802.11 b/g/n (at least b/g)		This camera is 802.11 b/g/n (at least b/g)
	It is also wired and the documents indicate is is PPoE		It is also wired and the documents indicate is is PPoE
			Cameras came with Channel 1 set to H.264, Channel 2 set to MJPEG
			out of the box. Check them prior to using them though You can access
			most of the settings from firefox, but if you want to see the video
			in the setup tool you have to use Windows as video display in the
			tool demands ActiveX. I just open a path to the raw video and watch
			it that way while I do changes in another browser window.

	Both mjpeg and mpeg4 work as indicated.		Both mjpeg and mpeg4 work as indicated.
Line 69:		Line 75:
	It is also wired and the documents indicate is is PPoE		It is also wired and the documents indicate is is PPoE
	I have been using it on the a side		I have been using it on the a side
			Cameras came with Channel 1 set to H.264, Channel 2 set to MJPEG
			out of the box. Check them prior to using them though You can access
			most of the settings from firefox, but if you want to see the video
			in the setup tool you have to use Windows as video display in the
			tool demands ActiveX. I just open a path to the raw video and watch
			it that way while I do changes in another browser window.

	Both mjpeg and mpeg4 work as indicated.		Both mjpeg and mpeg4 work as indicated.

Kp4djt at 04:14, 7 June 2011

2011-06-07T04:14:57Z

← Older revision		Revision as of 00:14, 7 June 2011
Line 60:		Line 60:
	Preserve Aspect Ratio []		Preserve Aspect Ratio []
	Orientation normal		Orientation normal

			Camera also does H.264, and VLC will display it just fine, but
			I had no luck with ZM.


Line 125:		Line 128:
	Preserve Aspect Ratio []		Preserve Aspect Ratio []
	Orientation normal		Orientation normal

			Camera also does H.264, and VLC will display it just fine, but
			I had no luck with ZM.

Kp4djt at 04:12, 7 June 2011

2011-06-07T04:12:28Z

← Older revision		Revision as of 00:12, 7 June 2011
Line 76:		Line 76:
	'''rtsp://camera_ip/channel1'''		'''rtsp://camera_ip/channel1'''
	I have not needed to use the login to access this stream.		I have not needed to use the login to access this stream.


			'''ZM Source info for mjpeg stream'''<br>
			Tab<br>
			+ General
			Name test1
			Source Type remote
			Function Whatever you have set
			Enabled [] check it to start capture
			Linked Monitors Whatever
			Maximum FPS 5 (my setting)
			Alarm Maximum FPS 10 (ditto)
			Reference Image Blend %ge 7
			Triggers none
			+ Source
			Remote Protocol http
			Remote Method simple
			Remote Host Name ip_address OR login:pwd@ip_address
			Remote Host Port 80 (unless you have set something different)
			Remote Host Path channel2 (unless you are using channel1)
			Remote Image Colors 24 bit
			Capture Width (pixels) 1280
			Capture Height (pixels) 800
			Preserve Aspect Ratio []
			Orientation normal

			'''ZM Source info for mpeg4 stream'''<br>
			Tab<br>
			+ General
			Name test1
			Source Type remote
			Function Whatever you have set
			Enabled [] check it to start capture
			Linked Monitors Whatever
			Maximum FPS 5 (my setting)
			Alarm Maximum FPs 10 (ditto)
			Reference Image Blend %ge 7
			Triggers none
			+ Source
			Remote Protocol rtsp
			Remote Method rtp/rtsp
			Remote Host Name ip_address OR login:pwd@ip_address
			Remote Host Port 554 (unless you have set something different)
			Remote Host Path channel1 (unless you are using channel2)
			Remote Image Colors 24 bit
			Capture Width (pixels) 1280
			Capture Height (pixels) 800
			Preserve Aspect Ratio []
			Orientation normal

Kp4djt at 04:11, 7 June 2011

2011-06-07T04:11:01Z

← Older revision		Revision as of 00:11, 7 June 2011
Line 51:		Line 51:
	+ Source		+ Source
	Remote Protocol rtsp		Remote Protocol rtsp
	Remote Method rtp/rtsp		Remote Method rtp/rtsp
	Remote Host Name ip_address OR login:pwd@ip_address		Remote Host Name ip_address OR login:pwd@ip_address
	Remote Host Port 554 (unless you have set something different)		Remote Host Port 554 (unless you have set something different)
	Remote Host Path channel1 (unless you are using channel2)		Remote Host Path channel1 (unless you are using channel2)
	Remote Image Colors 24 bit		Remote Image Colors 24 bit
	Capture Width (pixels) 1280		Capture Width (pixels) 1280
	Capture Height (pixels) 800		Capture Height (pixels) 800
	Preserve Aspect Ratio []		Preserve Aspect Ratio []
	Orientation normal		Orientation normal

Kp4djt at 04:09, 7 June 2011

2011-06-07T04:09:08Z

← Older revision		Revision as of 00:09, 7 June 2011
Line 42:		Line 42:
	Name test1		Name test1
	Source Type remote		Source Type remote
	Function Whatever you have set		Function Whatever you have set
	Enabled check it to start capture		Enabled [] check it to start capture
	Linked Monitors Whatever		Linked Monitors Whatever
	Maximum FPS 5 (my setting)		Maximum FPS 5 (my setting)
	Alarm Maximum ~~FPS~~ 10 (ditto)		Alarm Maximum FPs 10 (ditto)
	Reference Image Blend %ge 7		Reference Image Blend %ge 7
	Triggers none		Triggers none
	+ Source		+ Source

Kp4djt at 04:06, 7 June 2011

2011-06-07T04:06:55Z

← Older revision		Revision as of 00:06, 7 June 2011
Line 19:		Line 19:
	Source Type remote		Source Type remote
	Function Whatever you have set		Function Whatever you have set
	Enabled [] check it to start capture		Enabled [] check it to start capture
	Linked Monitors Whatever		Linked Monitors Whatever
	Maximum FPS 5 (my setting)		Maximum FPS 5 (my setting)
Line 27:		Line 27:
	+ Source		+ Source
	Remote Protocol http		Remote Protocol http
	Remote Method simple		Remote Method simple
	Remote Host Name ip_address OR login:pwd@ip_address		Remote Host Name ip_address OR login:pwd@ip_address
	Remote Host Port 80 (unless you have set something different)		Remote Host Port 80 (unless you have set something different)
	Remote Host Path channel2 (unless you are using channel1)		Remote Host Path channel2 (unless you are using channel1)
	Remote Image Colors 24 bit		Remote Image Colors 24 bit
	Capture Width (pixels) 1280		Capture Width (pixels) 1280
	Capture Height (pixels) 800		Capture Height (pixels) 800
	Preserve Aspect Ratio []		Preserve Aspect Ratio []
	Orientation normal		Orientation normal

	'''ZM Source info for mpeg4 stream'''<br>		'''ZM Source info for mpeg4 stream'''<br>

Kp4djt at 04:04, 7 June 2011

2011-06-07T04:04:20Z

← Older revision		Revision as of 00:04, 7 June 2011
Line 18:		Line 18:
	Name test1		Name test1
	Source Type remote		Source Type remote
	Function Whatever you have set		Function Whatever you have set
	Enabled check it to start capture		Enabled [] check it to start capture
	Linked Monitors Whatever		Linked Monitors Whatever
	Maximum FPS 5 (my setting)		Maximum FPS 5 (my setting)
	Alarm Maximum FPS 10 (ditto)		Alarm Maximum FPS 10 (ditto)
	Reference Image Blend %ge 7		Reference Image Blend %ge 7
	Triggers none		Triggers none
	+ Source		+ Source

Kp4djt at 04:01, 7 June 2011

2011-06-07T04:01:46Z

@@ Line 12: / Line 12: @@
   '''rtsp://camera_ip/channel1'''
   I have not needed to use the login to access this stream.
 '''ZM Source info for mjpeg stream'''<br>
 Tab<br>
@@ Line 35: / Line 36: @@
       Preserve Aspect Ratio	         []
       Orientation                           normal
 == WCB-100Ap-0c ==

Kp4djt at 03:59, 7 June 2011

2011-06-07T03:59:50Z

← Older revision		Revision as of 23:59, 6 June 2011
Line 15:		Line 15:
	Tab<br>		Tab<br>
	+ General		+ General
	Name test1		Name test1
	Source Type remote		Source Type remote
	Function Whatever you have set		Function Whatever you have set
	Enabled check it to start capture		Enabled check it to start capture
	Linked Monitors Whatever		Linked Monitors Whatever
	Maximum FPS 5 (my setting)		Maximum FPS 5 (my setting)
	Alarm Maximum FPS 10 (ditto)		Alarm Maximum FPS 10 (ditto)
	Reference Image Blend %ge 7		Reference Image Blend %ge 7
	Triggers none		Triggers none
	+ Source		+ Source
	Remote Protocol http		Remote Protocol http
	Remote Method simple		Remote Method simple
	Remote Host Name ip_address OR login:pwd@ip_address		Remote Host Name ip_address OR login:pwd@ip_address
	Remote Host Port 80 (unless you have set something different)		Remote Host Port 80 (unless you have set something different)
	Remote Host Path channel2 (unless you are using channel1)		Remote Host Path channel2 (unless you are using channel1)
	Remote Image Colors 24 bit		Remote Image Colors 24 bit
	Capture Width (pixels) 1280		Capture Width (pixels) 1280
	Capture Height (pixels) 800		Capture Height (pixels) 800