Cisco - Revision history

Compost01 at 21:24, 1 October 2019

2019-10-01T21:24:14Z

← Older revision		Revision as of 17:24, 1 October 2019
Line 22:		Line 22:
	**Remote Host Path: /img/video.mjpeg		**Remote Host Path: /img/video.mjpeg

	== CIVS-IPC-2611 / 2621V ==		== CIVS-IPC-2611 / 2621V (zm 1.32.3 release fix)==
			*Single H.264 Stream
	*~~MPEG-4~~		**Source Type: Libvlc
	**Source Type: ~~remote~~		**Source Path: rtsp://admin:your_password@xxx.xxx.xxx.xxx/img/h264media.sav (I used admin acct)
	**~~Remote Protocol~~: ~~RTSP~~		**Method: UDP
	**Remote Method: ~~RTP~~/~~RTSP~~		**Options: --rtp-client-port=5000
	**Remote Host Name: ~~User:pass~~@ip.~~address~~ (I used admin ~~acc~~)		**Target Colorspace: 24 bit color
	**~~Remote Host Port~~: ~~554 (defined at cam web interface)~~
	**~~Remote Host Path~~: ~~/img/video.sav (don't forget to choose MPEG~~-~~4 Stream at cam web interface)~~
	**~~Resolution depending on NTSC or PAL~~

	== CIVS-IPC-2630V ==		== CIVS-IPC-2630V ==

Blee: Added WVC210 Camera

2018-01-16T05:43:35Z

Added WVC210 Camera

@@ Line 11: / Line 11: @@
 **Remote Host Port:  80 (or whatever port you are forwarding if remote)
 **Remote Host Path:  /img/video.mjpeg   OR   /img/mjpeg.cgi
 == CIVS-IPC-2611 / 2621V ==

Compost01 at 17:39, 6 October 2017

2017-10-06T17:39:10Z

← Older revision		Revision as of 13:39, 6 October 2017
Line 59:		Line 59:

	'''Notes''': These settings finally yielded a perfect image and a consistent framerate of 15 FPS. It finally removed the smudging/smearing on the lower part of the image. The framerate settings in the camera will vary with your specific camera model (PAL/NTSC), and thus you may need to adjust acccordingly.		'''Notes''': These settings finally yielded a perfect image and a consistent framerate of 15 FPS. It finally removed the smudging/smearing on the lower part of the image. The framerate settings in the camera will vary with your specific camera model (PAL/NTSC), and thus you may need to adjust acccordingly.

			== CIVS-IPC-3530 ==
			*Tested with ffmpeg, firmware 2.0.3-27 (08/23/2014)
			*Source Path (primary stream): rtsp://user:password@x.x.x.x:554/StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=1&ChannelName=Channel1
			*Camera --> Network Setup Basic --> disable session id
			*Camera --> remember to set resolution to camera resolution and I had to play with the framerate (10) and quality (high)

	== CIVS-IPC-4500E ==		== CIVS-IPC-4500E ==
Line 78:		Line 84:

	'''''Notes''''': With these settings, I was able to completely eliminate image smudging/smearing.		'''''Notes''''': With these settings, I was able to completely eliminate image smudging/smearing.

	~~== CIVS-IPC-3530 ==~~
	*Tested with ffmpeg, firmware 2.0.3-27 (08/23/2014)
	*Source Path (primary stream): rtsp://user:password@x.x.x.x:554/StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=1&ChannelName=Channel1
	*Camera --> Network Setup Basic --> disable session id
	*Camera --> remember to set resolution to camera resolution and I had to play with the framerate (10) and quality (high)

	== CIVS-IPC-5011 ==		== CIVS-IPC-5011 ==
			*Testing in Progress

	== CIVS-IPC-6400 ==		== CIVS-IPC-6400 ==

Compost01 at 17:31, 6 October 2017

2017-10-06T17:31:33Z

← Older revision		Revision as of 13:31, 6 October 2017
Line 36:		Line 36:
	'''Notes''': This method yields a very clean image but only 1-2 FPSs, since it is pulling JPGs from the camera and displaying them as "video".		'''Notes''': This method yields a very clean image but only 1-2 FPSs, since it is pulling JPGs from the camera and displaying them as "video".

	*'''Stream Method''' ~~(flawed)~~		*'''Stream Method'''
	**Source Type: FFMPEG		**Source Type: FFMPEG
	**Source: rtsp://x.x.x.x/img/stream1		**Source: rtsp://x.x.x.x/img/stream1
Line 84:		Line 84:
	*Camera --> Network Setup Basic --> disable session id		*Camera --> Network Setup Basic --> disable session id
	*Camera --> remember to set resolution to camera resolution and I had to play with the framerate (10) and quality (high)		*Camera --> remember to set resolution to camera resolution and I had to play with the framerate (10) and quality (high)

			== CIVS-IPC-5011 ==

	== CIVS-IPC-6400 ==		== CIVS-IPC-6400 ==

Compost01: /* CIVS-IPC-2916 / 2930 / 2935 */

2017-07-30T01:56:43Z

CIVS-IPC-2916 / 2930 / 2935

@@ Line 40: / Line 40: @@
 **Source: rtsp://x.x.x.x/img/stream1
 **Remote Method: UDP (can´t get it to work on TCP)
 **Target Colorspace: 24 Bit Color
 **Width/Height: 704x576 (depends on your camera model)
-'''Notes''': This method yields great framerate but I get a horribly smudged image, even at 10 FPS in the camera settings.
+**Deinterlacing: Disabled
 == CIVS-IPC-4500E  ==

Compost01: /* CIVS-IPC-4500E */

2017-07-06T21:08:07Z

CIVS-IPC-4500E

← Older revision		Revision as of 17:08, 6 July 2017
Line 61:		Line 61:
	**Camera --> Network Setup Basic --> disable session id CHECKED		**Camera --> Network Setup Basic --> disable session id CHECKED

	'''Notes''': With these settings, I was able to completely eliminate image smudging/smearing.		'''''Notes''''': With these settings, I was able to completely eliminate image smudging/smearing.

	== CIVS-IPC-3530 ==		== CIVS-IPC-3530 ==

Compost01 at 21:06, 6 July 2017

2017-07-06T21:06:33Z

← Older revision		Revision as of 17:06, 6 July 2017
Line 30:		Line 30:
	== CIVS-IPC-2916 / 2930 / 2935 ==		== CIVS-IPC-2916 / 2930 / 2935 ==
	*'''JPG Method'''		*'''JPG Method'''
	*cURL (HTTP(s))		**Source Type: cURL (HTTP(s))
	*Source: http://x.x.x.x/jpeg?id=2		**Source: http://x.x.x.x/jpeg?id=2
	*Username/Password: admin/password (your selected password)		**Username/Password: admin/password (your selected password)
	*Width/Height: 704x576 (depends on your camera model)		**Width/Height: 704x576 (depends on your camera model)
	*'''Notes''': This method yields a very clean image but only 1-2 FPSs, since it is pulling JPGs from the camera and displaying them as "video".		'''Notes''': This method yields a very clean image but only 1-2 FPSs, since it is pulling JPGs from the camera and displaying them as "video".

	*'''Stream Method''' (flawed)		*'''Stream Method''' (flawed)
	*Source Type: FFMPEG		**Source Type: FFMPEG
	*Source: rtsp://x.x.x.x/img/stream1		**Source: rtsp://x.x.x.x/img/stream1
	*Remote Method: UDP (can´t get it to work on TCP)		**Remote Method: UDP (can´t get it to work on TCP)
	*Target Colorspace: 24 Bit Color		**Target Colorspace: 24 Bit Color
	*Width/Height: 704x576 (depends on your camera model)		**Width/Height: 704x576 (depends on your camera model)
	*'''Notes''': This method yields great framerate but I get a horribly smudged image, even at 10 FPS in the camera settings.		'''Notes''': This method yields great framerate but I get a horribly smudged image, even at 10 FPS in the camera settings.

	== CIVS-IPC-4500E ==		== CIVS-IPC-4500E ==
	*Tested on '''Firmware v2.4.3-293'''		*Tested on '''Firmware v2.4.3-293'''
	*'''General'''		*'''General'''
	*Source: Ffmpeg		**Source: Ffmpeg
	*Analysis FPS: Blank		**Analysis FPS: Blank
	*Maximum FPS: Blank		**Maximum FPS: Blank

	*'''Source'''		*'''Source'''
	*Source Path: rtsp://x.x.x.x:554/StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=1&ChannelName=Channel1&userName=user&password=password		**Source Path: rtsp://x.x.x.x:554/StreamingSetting?version=1.0&action=getRTSPStream&ChannelID=1&ChannelName=Channel1&userName=user&password=password
	*Target Colorspace: 24 Bit Color		**Target Colorspace: 24 Bit Color
	*Capture W/H: 1920/1080 pixels		**Capture W/H: 1920/1080 pixels

	*'''Camera Web Settings'''		*'''Camera Web Settings'''
	*Feature Setup --> Streaming --> Channel Name: Channel1		**Feature Setup --> Streaming --> Channel Name: Channel1
	*Feature Setup --> Streaming --> Video --> std: NTSC / codec: H.264 / Resolution: 1920x1080 / Rate: 10 fps / Quality: High		**Feature Setup --> Streaming --> Video --> std: NTSC / codec: H.264 / Resolution: 1920x1080 / Rate: 10 fps / Quality: High
	*Camera --> Network Setup Basic --> disable session id CHECKED		**Camera --> Network Setup Basic --> disable session id CHECKED

	'''Notes''': With these settings, I was able to completely eliminate image smudging/smearing.		'''Notes''': With these settings, I was able to completely eliminate image smudging/smearing.

Compost01 at 21:05, 6 July 2017

2017-07-06T21:05:06Z

← Older revision		Revision as of 17:05, 6 July 2017
Line 11:		Line 11:
	**Remote Host Port: 80 (or whatever port you are forwarding if remote)		**Remote Host Port: 80 (or whatever port you are forwarding if remote)
	**Remote Host Path: /img/video.mjpeg OR /img/mjpeg.cgi		**Remote Host Path: /img/video.mjpeg OR /img/mjpeg.cgi


	== CIVS-IPC-2611 / 2621V ==		== CIVS-IPC-2611 / 2621V ==

Compost01 at 21:04, 6 July 2017

2017-07-06T21:04:23Z

@@ Line 28: / Line 28: @@
 *Source Path: rtsp://user:password@x.x.x.x/img/h264media.sav
 *Camera --> remember to set resolution to camera resolution and I had to play with the framerate (10) and quality (high)
 == CIVS-IPC-4500E  ==

Compost01: /* CIVS-IPC-4500E */

2017-07-06T19:28:53Z

CIVS-IPC-4500E

← Older revision		Revision as of 15:28, 6 July 2017
Line 46:		Line 46:
	*Camera --> Network Setup Basic --> disable session id CHECKED		*Camera --> Network Setup Basic --> disable session id CHECKED

	Notes: With these settings, I was able to completely eliminate image smudging/smearing.		'''Notes''': With these settings, I was able to completely eliminate image smudging/smearing.

	== CIVS-IPC-3530 ==		== CIVS-IPC-3530 ==