Snake: /* Notes */

2018-02-19T19:19:26Z

Notes

← Older revision		Revision as of 15:19, 19 February 2018
Line 15:		Line 15:

	===Notes===		===Notes===
			<pre>
	On Wed, 7 Feb 2018, GBF Tech Support wrote:		On Wed, 7 Feb 2018, GBF Tech Support wrote:

Line 35:		Line 35:

	I left the Substream at the WAN default, but changed the Main stream to the LAN default to get the better resolution above.		I left the Substream at the WAN default, but changed the Main stream to the LAN default to get the better resolution above.
			</pre>

Snake: Created page with "A random user reports the following from the forums.[https://forums.zoneminder.com/viewtopic.php?f=10&t=26980] ===GBF PL960PM IP Video Door Phone=== In Zoneminder I set up t..."

2018-02-19T19:18:59Z

Created page with "A random user reports the following from the forums.[https://forums.zoneminder.com/viewtopic.php?f=10&t=26980] ===GBF PL960PM IP Video Door Phone=== In Zoneminder I set up t..."

New page

A random user reports the following from the forums.[https://forums.zoneminder.com/viewtopic.php?f=10&t=26980]

===GBF PL960PM IP Video Door Phone===

In Zoneminder I set up the Monitor/Source page as follows:

* Remote Protocol: RTSP
* Remote Method: RTP/Unicast
* Remote Host Name: <local.LAN.IP.address>
* Remote Host Port: 554
* Remote Host Path: /cam/realmonitor?
* Target colorspace: 24 bit Color
* Capture Width (pixels): 1280
* Capture Height (pixels):720

===Notes===

On Wed, 7 Feb 2018, GBF Tech Support wrote:

> Here is the video URL info.
>
> The URL for the video stream is compatible with Dahua brand IP Cameras and uses the following URL format;
>
> For Main Stream: rtsp://{CAM_ADDR}:{CAM_RTSP_PORT}/cam/realmonitor?
> For Sub Stream: rtsp://{CAM_ADDR}:{CAM_RTSP_PORT}/cam/realmonitor?subtype=1
>
> Some notes about the video coding;
>
> - The ControlCam App uses the Substream. The coding for this stream must stay H.264 and cannot be switched to MJPEG as this will disable
> the video stream through our servers and the App will no longer connect to
> the IP Doorbell.
> - The Video coding settings ideally should be left at WAN defaults (activated when you press the WAN button in the Video Coding settings in the
> Web Browser interface). Improving the video quality of this stream
> will be detrimental to the smooth communication between the IP Doorbell and your mobile device.

I left the Substream at the WAN default, but changed the Main stream to the LAN default to get the better resolution above.

GBF PL960PM IP Video Door Phone - Revision history

Snake: /* Notes */

Snake: Created page with "A random user reports the following from the forums.[https://forums.zoneminder.com/viewtopic.php?f=10&t=26980] ===GBF PL960PM IP Video Door Phone=== In Zoneminder I set up t..."