Grandstream - Revision history

Ivanp: The same H264 streaming (rtsp) method worked fined with my GXP3610_HD camera.

2016-04-01T01:33:43Z

The same H264 streaming (rtsp) method worked fined with my GXP3610_HD camera.

← Older revision		Revision as of 21:33, 31 March 2016
Line 3:		Line 3:
	[[:File:Zoneminder_and_grandstream.pdf\|Setup instructions]] Instructions provided by Grandstream to set up one of their cameras on a VMS Zoneminder install.		[[:File:Zoneminder_and_grandstream.pdf\|Setup instructions]] Instructions provided by Grandstream to set up one of their cameras on a VMS Zoneminder install.

	== GXV-3672-FHD & GXV-3672-FHD-36 IP Cameras ==		== GXV-3672-FHD, GXV-3672-FHD-36 and GXP3610_HD IP Cameras ==
	[[File:Gxv3672_sideview_1.jpg\|150px]]		[[File:Gxv3672_sideview_1.jpg\|150px]]

Saxa: /* GXV-3672-FHD & GXV-3672-FHD-36 IP Cameras */

2014-08-20T15:19:06Z

GXV-3672-FHD & GXV-3672-FHD-36 IP Cameras

@@ Line 107: / Line 107: @@
 === Sample snapshot ===
 [[File:Cam1.png|150px]]
 [[Category:Cameras]]
 [[Category:Network Cameras]]

Biloxigeek at 19:15, 22 April 2014

2014-04-22T19:15:57Z

← Older revision		Revision as of 15:15, 22 April 2014
Line 104:		Line 104:

	[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].		[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].

			=== Sample snapshot ===
			[[File:Cam1.png\|150px]]

	[[Category:Cameras]]		[[Category:Cameras]]
	[[Category:Network Cameras]]		[[Category:Network Cameras]]

Biloxigeek: /* Hardware */

2014-04-16T11:54:38Z

Hardware

← Older revision		Revision as of 07:54, 16 April 2014
Line 21:		Line 21:

	==== Hardware ====		==== Hardware ====
	Using ~~three~~ GXV-3672-FHD cameras on home built Core i7-3770 CPU @ 3.40GHz, 16GB, Asus P8Z77-V motherboard, at idle (monitoring the ~~three~~ low def feeds, no alerts) I see a load average ~~about 0~~.6.		Using two GXV-3672-FHD cameras and two GXV-3672-FHD36 cameras on a home built Core i7-3770 CPU @ 3.40GHz, 8 core, 16GB, Asus P8Z77-V motherboard, at idle (monitoring the four low def feeds, no alerts) I see a load average right around 1.5.

	=== Camera Settings ===		=== Camera Settings ===

Biloxigeek: /* ZM Monitors */

2014-04-16T11:51:20Z

ZM Monitors

← Older revision		Revision as of 07:51, 16 April 2014
Line 101:		Line 101:
	Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.		Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.

	Leave "Maximum FPS" and "Alarm Maximum FPS" fields empty~~, if~~ you match the frame rate as set in the camera you'll likely get false events due to image smearing. I made that mistake and it took me a week to realize that I had inadvertently entered 10 for fps to match the camera.		'''Leave "Maximum FPS" and "Alarm Maximum FPS" fields empty!'''. If you match the frame rate as set in the camera you'll likely get false events due to image smearing. I made that mistake and it took me a week to realize that I had inadvertently entered 10 for fps to match the camera.

	[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].		[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].

Biloxigeek: /* ZM Monitors */ Added note to leave FPS fields empty on the ZM side.

2014-04-15T21:08:36Z

ZM Monitors: Added note to leave FPS fields empty on the ZM side.

← Older revision		Revision as of 17:08, 15 April 2014
Line 100:		Line 100:

	Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.		Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.

			Leave "Maximum FPS" and "Alarm Maximum FPS" fields empty, if you match the frame rate as set in the camera you'll likely get false events due to image smearing. I made that mistake and it took me a week to realize that I had inadvertently entered 10 for fps to match the camera.

	[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].		[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].

Biloxigeek at 19:47, 29 March 2014

2014-03-29T19:47:35Z

← Older revision		Revision as of 15:47, 29 March 2014
Line 3:		Line 3:
	[[:File:Zoneminder_and_grandstream.pdf\|Setup instructions]] Instructions provided by Grandstream to set up one of their cameras on a VMS Zoneminder install.		[[:File:Zoneminder_and_grandstream.pdf\|Setup instructions]] Instructions provided by Grandstream to set up one of their cameras on a VMS Zoneminder install.

	== GXV-3672-FHD IP ~~Camera~~ ==		== GXV-3672-FHD & GXV-3672-FHD-36 IP Cameras ==
	[[File:Gxv3672_sideview_1.jpg\|150px]]		[[File:Gxv3672_sideview_1.jpg\|150px]]


	[http://www.grandstream.com/products/ip-video-surveillance/gxv3672 GXV-3272-FHD] Full HD camera, nighttime capability, supports a power over ethernet connection.		[http://www.grandstream.com/products/ip-video-surveillance/gxv3672 GXV-3272-FHD] Full HD camera, nighttime capability, supports a power over ethernet connection. FHD model uses an 8mm lens, FHD-36 model uses a 3.6 mm lens for a wider field of view. FHD model has a BNC video connector. FHD-36 has audio input and output connectors.

	=== Notes ===		=== Notes ===
Line 100:		Line 100:

	Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.		Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.


	~~== GXV-3672-FHD-36 IP Camera ==~~
	Set up info for this camera will be available soon. Only significant difference compared to the GXV-3672-FHD is the lens. This one has a 77° field of view using an 8mm lens, the GXV-3672-FHD has 45° using a 3.6mm.

	[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].		[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].

Biloxigeek at 11:34, 25 March 2014

2014-03-25T11:34:10Z

← Older revision		Revision as of 07:34, 25 March 2014
Line 100:		Line 100:

	Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.		Link from Cam1 to Cam1-low. Cam1-low is where the motion detection happens. When it alarms and starts recording the HiDef feed also starts recording.


			== GXV-3672-FHD-36 IP Camera ==
			Set up info for this camera will be available soon. Only significant difference compared to the GXV-3672-FHD is the lens. This one has a 77° field of view using an 8mm lens, the GXV-3672-FHD has 45° using a 3.6mm.

	[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].		[http://www.grandstream.com/products/surveillance/general/documents/grandstream_http_api.pdf API Document].

Biloxigeek: /* Notes */

2014-03-25T11:28:04Z

Notes

← Older revision		Revision as of 07:28, 25 March 2014
Line 10:		Line 10:

	=== Notes ===		=== Notes ===
			==== Testing camera functionality ====
	From Fedora 20, CentOS 6.5 or Scientific Linux 6.5 using vlc:		From Fedora 20, CentOS 6.5 or Scientific Linux 6.5 using vlc:
	* '''vlc rtsp://<ip addres>/0''' - The HiDef stream		* '''vlc rtsp://<ip addres>/0''' - The HiDef stream
Line 16:		Line 17:
	That showed me the camera was working well, had a stable stream with good resolution on both streams.		That showed me the camera was working well, had a stable stream with good resolution on both streams.

			==== ZM Version ====
	I started out using zm 1.26 and had a few minor issues that I was working through. Then I got ahold of the 1.27beta and pretty much all my minor issues were fixed. Now running under 1.27 things are working smooth.		I started out using zm 1.26 and had a few minor issues that I was working through. Then I got ahold of the 1.27beta and pretty much all my minor issues were fixed. Now running under 1.27 things are working smooth.

			==== Hardware ====
			Using three GXV-3672-FHD cameras on home built Core i7-3770 CPU @ 3.40GHz, 16GB, Asus P8Z77-V motherboard, at idle (monitoring the three low def feeds, no alerts) I see a load average about 0.6.

	=== Camera Settings ===		=== Camera Settings ===

Biloxigeek: /* Camera Settings */

2014-03-17T22:51:40Z

Camera Settings

← Older revision		Revision as of 18:51, 17 March 2014
Line 51:		Line 51:
	\|}		\|}

	One oddity: the HiDef stream is detected by vlc as 1920x1088.		One oddity: the HiDef stream is detected by vlc as 1920x1088, that is what needs to be set for the monitor.

	=== ZM Monitors ===		=== ZM Monitors ===