Hikvision DS 2CD2732FIS - Revision history

Crosseye: /* DS-2CD2732F-I(S) settings within Zoneminder: */

2016-08-26T17:31:11Z

DS-2CD2732F-I(S) settings within Zoneminder:

← Older revision		Revision as of 13:31, 26 August 2016
Line 59:		Line 59:
	When defining a monitor within Zoneminder with either type (Remote, Ffmpeg or Libvlc), most defaults will work with the exception of:		When defining a monitor within Zoneminder with either type (Remote, Ffmpeg or Libvlc), most defaults will work with the exception of:

	Remote		Remote:

	General tab:		General tab:
	:Source Type: Remote		:Source Type: Remote
Line 78:		Line 79:


	Ffmpeg or Libvlc		Ffmpeg or Libvlc:

	General tab:		General tab:
	:Source Type: Ffmpeg		:Source Type: Ffmpeg

Crosseye at 17:28, 26 August 2016

2016-08-26T17:28:46Z

← Older revision		Revision as of 13:28, 26 August 2016
Line 59:		Line 59:
	When defining a monitor within Zoneminder with either type (Remote, Ffmpeg or Libvlc), most defaults will work with the exception of:		When defining a monitor within Zoneminder with either type (Remote, Ffmpeg or Libvlc), most defaults will work with the exception of:

	Remote:		Remote
	General tab:		General tab:
	:Source Type: Remote		:Source Type: Remote
Line 78:		Line 78:


	Ffmpeg or Libvlc:		Ffmpeg or Libvlc
	General tab:		General tab:
	:Source Type: Ffmpeg		:Source Type: Ffmpeg

Crosseye: /* DS-2CD2732F-I(S) settings within the cameras WebGUI: */

2016-08-26T17:26:17Z

DS-2CD2732F-I(S) settings within the cameras WebGUI:

← Older revision		Revision as of 13:26, 26 August 2016
Line 16:		Line 16:
	:Bitrate Type: Constant		:Bitrate Type: Constant
	:Video Quality: Medium		:Video Quality: Medium
	:Frame Rate: 10 #Depends on needs but any setting works, just costs you on server resource consumption		:Frame Rate: 10 #Depends on needs but any setting works, higher rates just costs you on server resource consumption
	:Max. Bitrate: 12288 Kbps		:Max. Bitrate: 12288 Kbps
	:Video Encoding: H.264		:Video Encoding: H.264

Crosseye: /* DS-2CD2732F-I(S) settings within the cameras WebGUI: */

2016-08-26T17:24:41Z

DS-2CD2732F-I(S) settings within the cameras WebGUI:

← Older revision		Revision as of 13:24, 26 August 2016
Line 35:		Line 35:
	:I Frame Interval: 50		:I Frame Interval: 50


			Audio Options:
			:Video Type: Video&Audio
			:Audio Encoding: G.711uLaw
			:Audio Input: MicIn (unpowered microphone) or LineIn (powered microphone)
			:Input Volume: 75 #depends on sensitivity levels on your microphone
			:Environmental Noise Filter: On

	== DS-2CD2732F-I(S) settings within Zoneminder: ==		== DS-2CD2732F-I(S) settings within Zoneminder: ==

Crosseye at 15:58, 26 August 2016

2016-08-26T15:58:01Z

← Older revision		Revision as of 11:58, 26 August 2016
Line 1:		Line 1:
	H.264 1080p megapixel IP dome camera [http://www.hikvision.com/en/~~products_show~~.~~asp?id=8724~~] .		H.264 1080p megapixel IP dome camera [http://www.hikvision.com/us/Products_1_10532_i7626.html] .

	~~The camera I have working successfully~~ with Zoneminder ~~is running the following firmware~~:		These cameras work great depending on your firmware, the following firmwares are known to work with Zoneminder:
			:V5.0.2 build 130805
			:V5.3.0 build 150513

	~~:V5~~.0.~~2 130805~~		There are multiple ways to connect these cameras to Zoneminder, either with Remote, Ffmpeg or Libvlc. But thanks to Zoneminder v1.28 or higher and the complete rebuild to the RTP receiver, the best way to connect these cameras are by using Remote. This method cuts out transcoding and drastically cuts down on CPU usage and any smudging effect caused by transcoding (Ffmpeg or Libvlc).

	~~High Bit Rate, Frame Rate, non-TCP and 1080p streaming cause smearing for me when using Zoneminder 1.26.3, but the following camera settings seem to be reliable:~~

			== DS-2CD2732F-I(S) settings within the cameras WebGUI: ==

			Remote:
			:Stream Type: Main Stream(Normal)
			:Video Type: Video Stream #Change to Video&Audio if a microphone is connected
			:Resolution: 1920*1080P
			:Bitrate Type: Constant
			:Video Quality: Medium
			:Frame Rate: 10 #Depends on needs but any setting works, just costs you on server resource consumption
			:Max. Bitrate: 12288 Kbps
			:Video Encoding: H.264
			:Profile: Main Profile
			:I Frame Interval: 15 #This is important to keep the video in sync, might even want to drop it to 10
			:SVC: Auto


			Ffmpeg or Libvlc:
	:Stream Type: Main Stream(Normal)		:Stream Type: Main Stream(Normal)
	:Video Type: Video Stream		:Video Type: Video Stream
Line 17:		Line 35:
	:I Frame Interval: 50		:I Frame Interval: 50

	~~You may get away with a higher Bit/Frame Rate and resolution, but the above work well for me.~~

	== ~~Using the~~ DS-2CD2732F-I(S) ~~with~~ Zoneminder : ==		== DS-2CD2732F-I(S) settings within Zoneminder: ==

			There are a few streaming channels available, depending on your version and if you have a microphone connect. Highly recommend testing the different channels to find one that best works for your system.

			rtsp:// /Streaming/Channels/1
			rtsp:// /Streaming/Channels/101
			rtsp:// /Streaming/Channels/2
			rtsp:// /video.h264
			rtsp:// /rtsph2641080p
			rtsp:// /cam1/mpeg4
			rtsp:// /live/ #without audio channel
			rtsp:// /live.sdp/ #with audio channel


	~~== Videostream~~: ==		When defining a monitor within Zoneminder with either type (Remote, Ffmpeg or Libvlc), most defaults will work with the exception of:

	~~Default settings, with the exception of~~:		Remote:
			General tab:
			:Source Type: Remote

	~~General~~		Source tab:
			:Remote Protocol: RTSP
			:Remote Method: RTP/RTSP
			:Remote Host Name: <username>:<password>@<ip_address>
			:Remote Host Port: 554
			:Remote Host Path: /live/ #/live.sdp/ with microphone connected
			:Target colorspace: 32 bit color
			:Capture Width (pixels): 1920
			:Capture Height (pixels): 1080
			:Preserve Aspect Ratio: Unchecked
			:Orientation: Normal
			:Deinterlacing: Disabled
			:Use RTSP Response Media URL: Checked

	~~:Source Type : Ffmpeg~~

	Source		Ffmpeg or Libvlc:
			General tab:
			:Source Type: Ffmpeg

	:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1		Source tab:
	:Remote Method : RTP/RTSP		:Source Path: rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1
	:Target Colorspace : 32 bit colour		:Remote Method: RTP/RTSP
	:Capture Width (pixels) : 1280		:Target Colorspace: 32 bit colour
	:Capture Height (pixels) : 720		:Capture Width (pixels): 1280
			:Capture Height (pixels): 720

C128: /* Videostream: */

2015-01-04T09:36:53Z

Videostream:

← Older revision		Revision as of 05:36, 4 January 2015
Line 31:		Line 31:
	Source		Source

	:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1~~?tcp~~		:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1
			:Remote Method : RTP/RTSP
	:Target Colorspace : 32 bit colour		:Target Colorspace : 32 bit colour
	:Capture Width (pixels) : 1280		:Capture Width (pixels) : 1280
	:Capture Height (pixels) : 720		:Capture Height (pixels) : 720

C128 at 09:22, 4 January 2015

2015-01-04T09:22:27Z

← Older revision		Revision as of 05:22, 4 January 2015
Line 3:		Line 3:
	The camera I have working successfully with Zoneminder is running the following firmware:		The camera I have working successfully with Zoneminder is running the following firmware:

	:~~TBC~~		:V5.0.2 130805

	High Bit Rate, Frame Rate, non-TCP and 1080p streaming cause smearing for me when using Zoneminder 1.26.3, but the following camera settings seem to be reliable:		High Bit Rate, Frame Rate, non-TCP and 1080p streaming cause smearing for me when using Zoneminder 1.26.3, but the following camera settings seem to be reliable:

	:~~TBC~~		:Stream Type: Main Stream(Normal)
			:Video Type: Video Stream
			:Resolution: 1080*720p
			:Bitrate Type: Variable
			:Video Quality: Medium
			:Frame Rate: 10
			:Max. Bitrate: 1024 Kbps
			:Video Encoding: H.264
			:I Frame Interval: 50

	You may get away with a higher Bit/Frame Rate and resolution, but the above work well for me.		You may get away with a higher Bit/Frame Rate and resolution, but the above work well for me.

C128: Created page with "H.264 1080p megapixel IP dome camera [http://www.hikvision.com/en/products_show.asp?id=8724] . The camera I have working successfully with Zoneminder is running the following..."

2013-12-07T15:30:50Z

Created page with "H.264 1080p megapixel IP dome camera [http://www.hikvision.com/en/products_show.asp?id=8724] . The camera I have working successfully with Zoneminder is running the following..."

New page

H.264 1080p megapixel IP dome camera [http://www.hikvision.com/en/products_show.asp?id=8724] .

The camera I have working successfully with Zoneminder is running the following firmware:

:TBC

High Bit Rate, Frame Rate, non-TCP and 1080p streaming cause smearing for me when using Zoneminder 1.26.3, but the following camera settings seem to be reliable:

:TBC

You may get away with a higher Bit/Frame Rate and resolution, but the above work well for me.

== Using the DS-2CD2732F-I(S) with Zoneminder : ==

== Videostream: ==

Default settings, with the exception of:

General

:Source Type : Ffmpeg

Source

:Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp
:Target Colorspace : 32 bit colour
:Capture Width (pixels) : 1280
:Capture Height (pixels) : 720