SC-3171 - Revision history

Plalloni: /* Getting MPEG streams from TL-SC3171/G */

2011-05-19T21:28:56Z

Getting MPEG streams from TL-SC3171/G

← Older revision		Revision as of 17:28, 19 May 2011
Line 20:		Line 20:

	* Enable RTSP in the camera (leaving the default RTSP port of 554, otherwise modify appropriately the following steps' URLs)		* Enable RTSP in the camera (leaving the default RTSP port of 554, otherwise modify appropriately the following steps' URLs)
	* Point your monitor to an ffmpeg source to <code>rtsp://<camera-ip>/video.mp4</code> to get the stream configured as the MPEG4 "Computer View" in your camera, so you must match width, height and color depth to ~~that~~, or...		* Point your monitor to an ffmpeg source to <code>rtsp://<camera-ip>/video.mp4</code> to get the stream configured as the MPEG4 "Computer View" in your camera, so you must match width & height and set color depth to 24, or...
	* Point your monitor to an ffmpeg source to <code>rtsp://<camera-ip>/video.3gp</code> to get the stream configured as the MPEG4 "Mobile View" in your camera, so you must match width, ~~height~~ and color depth to ~~that~~.		* Point your monitor to an ffmpeg source to <code>rtsp://<camera-ip>/video.3gp</code> to get the stream configured as the MPEG4 "Mobile View" in your camera, so you must match width & height to whatever you configured there, and set color depth to 24.

	Tested working fine with audio codec enabled & disabled, with multicast streaming enabled & disabled, with viewer authentication enabled (put <code>rtsp://<user>:<password>@<camera-ip>/...</code> in above URLs) ~~& disabled~~ and with uPnP enabled & disabled.		Tested working fine with audio codec enabled & disabled, with multicast streaming enabled & disabled, with viewer authentication disabled & enabled (put <code>rtsp://<user>:<password>@<camera-ip>/...</code> in above URLs) and with uPnP enabled & disabled.

	In both cases worked fine over wifi at maximum resolutions and color depths allowed by the camera in each case (~~640x480x24bppx30fps, on~~ fixed "excelent" quality on "Computer View"'s mp4 and ~~320x240x24bppx10fps, on~~ fixed "excelent" quality on "Mobile View"'s 3gp streams).		In both cases worked fine over wifi at maximum resolutions and color depths allowed by the camera in each case (640x480 24bpp 30fps at fixed "excelent" quality on "Computer View"'s mp4 and 320x240 24bpp 10fps at fixed "excelent" quality on "Mobile View"'s 3gp streams).

	The side effect is that MJPEG stream is disabled when you enable RTSP for accessing MPEG streams, so you can't do both at the same time.		The side effect is that MJPEG stream is disabled when you enable RTSP for accessing MPEG streams, so you can't do both at the same time.

Plalloni: Added config for accessing mpeg streams

2011-05-19T20:51:52Z

Added config for accessing mpeg streams

← Older revision		Revision as of 16:51, 19 May 2011
Line 16:		Line 16:

	Settings > BASCI > Network > UPnP (Enable and Turn on)		Settings > BASCI > Network > UPnP (Enable and Turn on)

			= Getting MPEG streams from TL-SC3171/G =

			* Enable RTSP in the camera (leaving the default RTSP port of 554, otherwise modify appropriately the following steps' URLs)
			* Point your monitor to an ffmpeg source to <code>rtsp://<camera-ip>/video.mp4</code> to get the stream configured as the MPEG4 "Computer View" in your camera, so you must match width, height and color depth to that, or...
			* Point your monitor to an ffmpeg source to <code>rtsp://<camera-ip>/video.3gp</code> to get the stream configured as the MPEG4 "Mobile View" in your camera, so you must match width, height and color depth to that.

			Tested working fine with audio codec enabled & disabled, with multicast streaming enabled & disabled, with viewer authentication enabled (put <code>rtsp://<user>:<password>@<camera-ip>/...</code> in above URLs) & disabled and with uPnP enabled & disabled.

			In both cases worked fine over wifi at maximum resolutions and color depths allowed by the camera in each case (640x480x24bppx30fps, on fixed "excelent" quality on "Computer View"'s mp4 and 320x240x24bppx10fps, on fixed "excelent" quality on "Mobile View"'s 3gp streams).

			The side effect is that MJPEG stream is disabled when you enable RTSP for accessing MPEG streams, so you can't do both at the same time.

Beandj: Created page with "TP-Link SC3171 (Firmware LM.1.6.17) - First Update the firmware - Change Zoneminder Cam settings Remote Protocol: HTTP Remote Method: Simple Remote Host Name: x.x..."

2011-05-05T11:29:20Z

Created page with "TP-Link SC3171 (Firmware LM.1.6.17) - First Update the firmware - Change Zoneminder Cam settings Remote Protocol: HTTP Remote Method: Simple Remote Host Name: x.x..."

New page

TP-Link SC3171 (Firmware LM.1.6.17)

- First Update the firmware

- Change Zoneminder Cam settings

Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: x.x.x.x
Remote Host Port: xx
Remote Host Path: /video.mjpg

on web browser: http://<ip>:<port>/

Settings > BASIC > System > Initialize (Disable RTSP and Audio Codec)

Settings > BASCI > Network > UPnP (Enable and Turn on)