Autotravis at 00:07, 23 January 2020

2020-01-23T00:07:13Z

← Older revision		Revision as of 20:07, 22 January 2020
Line 8:		Line 8:

	* Source Type: ffmpeg		* Source Type: ffmpeg
	* Source Path: rtsp://[camera's IP]:554		* Source Path: rtsp://[camera's IP]:554 (I turned off the security on the camera, but with it on it would be rtsp://admin:admin@[camera's IP]:554)
	* Method: TCP		* Method: TCP
	* Capture Resolution: 1920x1080 (I also changed this in the camera's settings. It worked fine at 4MP but I didn't need that high of resolution)		* Capture Resolution: 1920x1080 (I also changed this in the camera's settings. It worked fine at 4MP but I didn't need that high of resolution)

	This is my first camera and experience with ZoneMinder. The default zone definition was not catching motion. I changed the units from percent to pixels and minimum alarm area to 10,000 pixels (out of 2228840 total in my alarm area). This is perfect. Absolutely 0 false alarms and no missed motion that I care about (detects my 30 lb dog at 50 ft).		This is my first camera and experience with ZoneMinder. The default zone definition was not catching motion. I changed the units from percent to pixels and minimum alarm area to 10,000 pixels (out of 2228840 total in my alarm area). This is perfect. Absolutely 0 false alarms and no missed motion that I care about (detects my 30 lb dog at 50 ft).

Autotravis: Created page with "200px [https://amzn.to/2tzeVu5 WGCC Dome POE IP Camera Onvif 4MP 2.8mm Wide Angle IP Exterior Camera Indoor Outdoor Wired PoE Network Came..."

2020-01-23T00:02:02Z

Created page with "200px [https://amzn.to/2tzeVu5 WGCC Dome POE IP Camera Onvif 4MP 2.8mm Wide Angle IP Exterior Camera Indoor Outdoor Wired PoE Network Came..."

New page

[[File:Wgcc_4mp_poe_ip_camera.jpg|200px]]

[https://amzn.to/2tzeVu5 WGCC Dome POE IP Camera Onvif 4MP 2.8mm Wide Angle IP Exterior Camera Indoor Outdoor Wired PoE Network Camera with 98ft Security IR Night Vision, Remote Viewing, IP67 Waterproof]

[https://amzn.to/2tzeVu5 https://amzn.to/2tzeVu5]

I have this camera set up with ZoneMinder 1.34.0

* Source Type: ffmpeg
* Source Path: rtsp://[camera's IP]:554
* Method: TCP
* Capture Resolution: 1920x1080 (I also changed this in the camera's settings. It worked fine at 4MP but I didn't need that high of resolution)

This is my first camera and experience with ZoneMinder. The default zone definition was not catching motion. I changed the units from percent to pixels and minimum alarm area to 10,000 pixels (out of 2228840 total in my alarm area). This is perfect. Absolutely 0 false alarms and no missed motion that I care about (detects my 30 lb dog at 50 ft).

Wgcc - Revision history

Autotravis at 00:07, 23 January 2020

Autotravis: Created page with "200px [https://amzn.to/2tzeVu5 WGCC Dome POE IP Camera Onvif 4MP 2.8mm Wide Angle IP Exterior Camera Indoor Outdoor Wired PoE Network Came..."