Difference between revisions of "Foscam C1"
From ZoneMinder Wiki
Jump to navigationJump to search
| (5 intermediate revisions by 3 users not shown) | |||
| Line 3: | Line 3: | ||
'''Source''' | '''Source''' | ||
* Source Path: rtsp://<user>:<password>@<ip>/videoMain | * Source Path: rtsp://<user>:<password>@<ip>:<port>/videoMain | ||
* Remote Method: RTP/RTSP | * Remote Method: RTP/RTSP | ||
* Target Colorspace: 32 bit | * Target Colorspace: 32 bit | ||
| Line 9: | Line 9: | ||
* Capture Height: 720 | * Capture Height: 720 | ||
* Deinterlacing: Disabled | * Deinterlacing: Disabled | ||
'''Control''' | |||
* Controllable: No | |||
'''Other Considerations''' | |||
* On newer firmware for the C1 you need to enable "Onvif" in the network settings to enable the RTSP port. This can be done by accessing the local webpage for the IP address and port 88 (http://x.x.x.x:88) | |||
Latest revision as of 16:49, 20 January 2018
General
- Source Type: FFmpeg
Source
- Source Path: rtsp://<user>:<password>@<ip>:<port>/videoMain
- Remote Method: RTP/RTSP
- Target Colorspace: 32 bit
- Capture Width: 1280
- Capture Height: 720
- Deinterlacing: Disabled
Control
- Controllable: No
Other Considerations
- On newer firmware for the C1 you need to enable "Onvif" in the network settings to enable the RTSP port. This can be done by accessing the local webpage for the IP address and port 88 (http://x.x.x.x:88)
