Difference between revisions of "Swann"
m (→Links) |
|||
| (2 intermediate revisions by 2 users not shown) | |||
| Line 3: | Line 3: | ||
== SWNHD-806CAM 720P IP POE == | == SWNHD-806CAM 720P IP POE == | ||
With the help of: [http://sourceforge.net/projects/onvifdm/ Onvif Device Manager] found the correct port and path to camera feed as follows: | With the help of: [http://sourceforge.net/projects/onvifdm/ Onvif Device Manager] found the correct port and path to camera feed as follows: | ||
| Line 30: | Line 29: | ||
As yet, haven't ramped up the security settings on this or tweaked any of the Zoneminder settings and not sure if the Morecord feature works, but Record definitely does! --[[User:Jakestrat|Jakestrat]] ([[User talk:Jakestrat|talk]]) | As yet, haven't ramped up the security settings on this or tweaked any of the Zoneminder settings and not sure if the Morecord feature works, but Record definitely does! --[[User:Jakestrat|Jakestrat]] ([[User talk:Jakestrat|talk]]) | ||
== SWIFI-SPOTCAM 1080P IP WIFI/Ethernet == | |||
A permanent-power standalone 1080P 2.4Ghz Wifi/Ethernet camera with audio. Contrary to Swann's specifications, it is entirely possible to record audio with these cameras as part of the stream. | |||
Cameradar was used to brute-force the rtsp parameters. | |||
Using ffmpeg to encode it is possible to record the stream from either wifi or the optional ethernet port. | |||
Overlay date/time and "camera name" are embedded in stream. | |||
Stream was recorded with the following parameters: | |||
Camera connection path: "rtsp://:@<ip_path_to_camera>:554//" | |||
Codec: H264 | |||
Resolution: 1920x1080 | |||
Max FPS: ~14-15 | |||
Color Space: Rec. 709 in daylight (monochrome IR night vision) | |||
Audio Sample Rate: 8khz | |||
Audio Bits per sample: 32 | |||
Attempting to use VLC to monitor RTSP stream causes camera to power-cycle for some unknown reason? | |||
No authentication required and several other network ports open - consider air-gapping your setup with these cameras. | |||
Have not yet integrated into Zoneminder setup, so results may vary. | |||
--[[User:netstar98|netstar98]] | |||
== Links == | == Links == | ||
| Line 37: | Line 76: | ||
[http://swann.com/downloads/New_FTP/Name/Public_Software_Archives/Swannview_Link/ Swann's Own viewing software] | [http://swann.com/downloads/New_FTP/Name/Public_Software_Archives/Swannview_Link/ Swann's Own viewing software] | ||
NB Swann's viewing software is designed for their bespoke system | NB Swann's viewing software is designed for their bespoke system. | ||
Latest revision as of 21:25, 15 December 2025
Have been able to get the following model working:
SWNHD-806CAM 720P IP POE
With the help of: Onvif Device Manager found the correct port and path to camera feed as follows:
rtsp://<ip path to camera>:554/h264Preview_01_main
Tested this in VLC and was able to connect to the stream. Therefore used the following setting in Zoneminder camera setup:
Source Type: Libvlc
Max FPS 40
Source Path: rtsp://<ip path to camera>:554/h264Preview_01_main
Remote Method: RTP/Multicast
Options: none
Target Colorspace: 24 bit colour
Capture Width (pixels): 1280
Capture Height (pixels): 720
Preserve Aspect Ratio: (not selected)
As yet, haven't ramped up the security settings on this or tweaked any of the Zoneminder settings and not sure if the Morecord feature works, but Record definitely does! --Jakestrat (talk)
SWIFI-SPOTCAM 1080P IP WIFI/Ethernet
A permanent-power standalone 1080P 2.4Ghz Wifi/Ethernet camera with audio. Contrary to Swann's specifications, it is entirely possible to record audio with these cameras as part of the stream.
Cameradar was used to brute-force the rtsp parameters.
Using ffmpeg to encode it is possible to record the stream from either wifi or the optional ethernet port.
Overlay date/time and "camera name" are embedded in stream.
Stream was recorded with the following parameters:
Camera connection path: "rtsp://:@<ip_path_to_camera>:554//"
Codec: H264
Resolution: 1920x1080
Max FPS: ~14-15
Color Space: Rec. 709 in daylight (monochrome IR night vision)
Audio Sample Rate: 8khz
Audio Bits per sample: 32
Attempting to use VLC to monitor RTSP stream causes camera to power-cycle for some unknown reason?
No authentication required and several other network ports open - consider air-gapping your setup with these cameras.
Have not yet integrated into Zoneminder setup, so results may vary.
Links
How do I get my camera connected to IPCamLive?
Swann's Own viewing software
NB Swann's viewing software is designed for their bespoke system.
