Difference between revisions of "Zone Parameter Explanations"
From ZoneMinder Wiki
Jump to navigationJump to search
| Line 4: | Line 4: | ||
==Name== | ==Name== | ||
Each Zone can be named for reference purposes. Choose a name that helps you identify your zones. | |||
==Type== | ==Type== | ||
Active - | |||
Inclusive - | |||
Exclusive - | |||
Preclusive - | |||
Inactive - | |||
==Units== | ==Units== | ||
Pixels - | |||
Percentage - | |||
==Minimum X - Minimum Y - Maximum X - Maximum Y== | ==Minimum X - Minimum Y - Maximum X - Maximum Y== | ||
Use these parameters to define the X,Y coordinates of the corners of the zone that is to be defined. | |||
==Alarm Colour== | ==Alarm Colour== | ||
These parameters can be used to indvidually colorize the zone overlay pattern. By default, red is the active zone and green is the ??? zone. | |||
==Alarm Check Method== | ==Alarm Check Method== | ||
Alarmed Pixels - | |||
Filtered Pixels - | |||
Blob Pixels - | |||
==Minimum Pixel Threshold== | ==Minimum Pixel Threshold== | ||
==Maximum Pixel Threshold== | ==Maximum Pixel Threshold== | ||
==Filter Width and Filter Height== | |||
==Minimum Filtered Area== | |||
==Maximum Filtered Area== | |||
==Minimum Blob Area== | |||
==Maximum Blob Area== | |||
==Minimum Blobs== | |||
==Maximum Blobs== | |||
Revision as of 16:53, 17 June 2007
Zone Parameter Explanations
- Note: This area is complex and needs alot of work. Please help in any way that you can!
Name
Each Zone can be named for reference purposes. Choose a name that helps you identify your zones.
Type
Active -
Inclusive -
Exclusive -
Preclusive -
Inactive -
Units
Pixels -
Percentage -
Minimum X - Minimum Y - Maximum X - Maximum Y
Use these parameters to define the X,Y coordinates of the corners of the zone that is to be defined.
Alarm Colour
These parameters can be used to indvidually colorize the zone overlay pattern. By default, red is the active zone and green is the ??? zone.
Alarm Check Method
Alarmed Pixels -
Filtered Pixels -
Blob Pixels -
