Maygion

How to setup Maygion IP CAM (or clones)

Camera IP-603 (wifi/LAN)

http://www.maygion.com/Picfiles/ip-603.jpg

Camera IP-604 (LAN)

http://www.maygion.com/Picfiles/ip-604.jpg

Camera useful information

Support/downloads-> http://www.maygion.com/

Camera specs-> http://www.maygion.com/product_ui.html

CGI commands manual-> http://www.maygion.com/downloads/20091208/IPCamera%20CGI%20manual.pdf

I recommend to setup the camera settings using Windows (yes...I have to recognize that using the ActiveX and IE makes it easier than sending CGI commands...., am I lazy?), but you could setup your camera using CGI commands as follows:

Setting video resolution

QVGA(320x240) -> http://XXX.XXX.XXX.XXX/cgi.cmd?cmd=setqvga?usr=your_user&pwd=your_pwd

VGA(640x480) -> http://XXX.XXX.XXX.XXX/cgi.cmd?cmd=setvga?usr=your_user&pwd=your_pwd

Zoneminder settings (these are the settings I'm using, change them to match your needs as appropriate):

General Tab:

Source Type : Remote

Enabled : checked

Maximum FPS : 6

Alarm Maximum FPS : 12

Reference Image Blend %ge : 9

Source Tab:

Remote Protocol: HTTP

Remote Method: Simple

Remote Host Name: put.your.cam.ip

Remote Host Port: 80

Remote Host Path: /snapshot.cgi?usr=your_user&pwd=your_pwd

Remote Image Colors: 24 bit color

Capture Width (pixels): 320

Capture Height (pixels):240

Buffers:

Image Buffer Size (frames): 40

Warmup Frames: 18

Pre Event Image Count: 18

Post Event Image Count: 60

Stream Replay Image Buffer: 480

Alarm Frame Count: 4

Hope it helps,

--PacoLM 08:53, 17 March 2010 (UTC)