Difference between revisions of "Anran VGB101-IP"
(Created page with "This camera must be setup with IE since it requires an ActiveX control. Not being a Windows guy, it took me a while to figure out how to get Windows to stop "protecting" me fr...") |
|||
| Line 12: | Line 12: | ||
rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp | rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp | ||
If you have image corruption, add ?tcp to the url like this: | |||
rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp?tcp | |||
The camera comes with it's own Windows DVR but zero documentation on the camera. I finally found out the default IP is 192.168.1.10 and user "admin" no password. at $138 it seems to be a fairly good camera for the price. Just wish it didn't require ActiveX but it's only needed for initial set up. | The camera comes with it's own Windows DVR but zero documentation on the camera. I finally found out the default IP is 192.168.1.10 and user "admin" no password. at $138 it seems to be a fairly good camera for the price. Just wish it didn't require ActiveX but it's only needed for initial set up. | ||
http://www.aliexpress.com/item/78-IR-H-264-HP-1080P-25fps-Network-IP-Camera-Waterproof-Security-Camera-Varifocal-2-8/1008342579.html | http://www.aliexpress.com/item/78-IR-H-264-HP-1080P-25fps-Network-IP-Camera-Waterproof-Security-Camera-Varifocal-2-8/1008342579.html | ||
Latest revision as of 19:49, 23 September 2013
This camera must be setup with IE since it requires an ActiveX control. Not being a Windows guy, it took me a while to figure out how to get Windows to stop "protecting" me from an unknown ActiveX publisher. Within IE, select Tools -> Internet Options -> Security. Select "Custom Level" and change the ActiveX settings to "Prompt".
This is a 2MP night vision outdoor bullet camera that so far seems to do a good job but I've only tested it for a few hours. I'll update after I have more experience with it.
- H.264 only
- 1920X1080 or 1280X720
- 25 FPS
In ZM, Set to ffmpeg and use this for source:
rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp
If you have image corruption, add ?tcp to the url like this:
rtsp://192.168.1.10/user=admin&password=admin_channel=1_stream=0.sdp?tcp
The camera comes with it's own Windows DVR but zero documentation on the camera. I finally found out the default IP is 192.168.1.10 and user "admin" no password. at $138 it seems to be a fairly good camera for the price. Just wish it didn't require ActiveX but it's only needed for initial set up.
