Difference between revisions of "EasyN"
| Line 20: | Line 20: | ||
General tab: | General tab: | ||
Source Type = Remote | Source Type = Remote | ||
Function = Monitor | Function = Monitor | ||
Enabled = ticked | Enabled = ticked | ||
Source tab: | Source tab: | ||
Remote Protocol = RTSP | Remote Protocol = RTSP | ||
Remote Method = RTP/RTSP | Remote Method = RTP/RTSP | ||
Remote Host Name = user:user@192.168.1.126 | Remote Host Name = user:user@192.168.1.126 | ||
Remote Host Port = 554 | Remote Host Port = 554 | ||
Remote Host Path = 11 | Remote Host Path = 11 | ||
Target Colorspace = 24 bit colour | Target Colorspace = 24 bit colour | ||
Capture Width (pixels) = 320 | Capture Width (pixels) = 320 | ||
Capture Height (pixels) = 240 | Capture Height (pixels) = 240 | ||
Preserve Aspect Ratio = unticked | Preserve Aspect Ratio = unticked | ||
Orientation = Normal | Orientation = Normal | ||
Deinerlacing = Disabled | Deinerlacing = Disabled | ||
Revision as of 01:37, 11 January 2015
The following has only been used for the EasyN, Mini Speed Dome, Model No. 1BF, IP Camera.
Configuring the 1BF can be made with a web browser pointed to port 81, for example;
Initially used a web browser to enable ONVIF on the camera. The used ONVIF Device Manager v2.2.250, to ascertain it was possible to access video feed via;
rtsp://192.168.1.126:554/11
However this required the entering of a username and password.
It was possible to provide these detail in the ZM address field.
ZM monitor configuration
General tab:
Source Type = Remote
Function = Monitor
Enabled = ticked
Source tab:
Remote Protocol = RTSP
Remote Method = RTP/RTSP
Remote Host Name = user:user@192.168.1.126
Remote Host Port = 554
Remote Host Path = 11
Target Colorspace = 24 bit colour
Capture Width (pixels) = 320
Capture Height (pixels) = 240
Preserve Aspect Ratio = unticked
Orientation = Normal
Deinerlacing = Disabled
