Difference between revisions of "Debian 12 Bookworm with Zoneminder 1.36.x and 1.37.x"

From ZoneMinder Wiki
Jump to navigationJump to search
m (minor case conformity)
 
(39 intermediate revisions by 4 users not shown)
Line 1: Line 1:
__TOC__
__TOC__


===Debian 9 with Zoneminder 1.30.4===
08OCT17 - This procedure has been verified with the Debian 9.2.0. 


Note: 23JUN17 - I was able to get the libvlc source to work! I have added the install for vlc-plugin-base which allows the Zoneminder install to complete without errors. However, I have been getting some console errors from VLC. It may be my old camera and you may have good results with libvlc but I consider ffmpeg better to use.
==Debian 12 with Zoneminder 1.36.34==
Debian 12 has been released with Zoneminder 1.36.33 and as usual for Debian the zm database needs to be created manually. This is not user friendly.  So we will be using the packages provided by the ZoneMinder development team hosted at zmrepo.zoneminder.com.  


I used Debian 9 net install CD (https://www.debian.org/CD/netinst/).  
Debian, unlike Ubuntu, does not install sudo with the initial setup. While you can log in as root, a user with sudo authority is recommended.  


Install only: web server, SSH server and standard system utilities from tasksel
To enable sudo:
In a terminal,become root with su. Enter your root password.
Install sudo with:  
apt install sudo
Add the user account to the group sudo with:
/sbin/adduser username sudo
where username is your user account.
Exit root then log out and then log in with the same user.
Become root:
sudo su


Login and become root (su root) or prepend sudo to the following commands
Timezone: it is recommended you set your specific timesone with:
timedatectl set-timezone America/New_York
Of course use your timezone in place of America/New_York.


If needed check to make sure you are up to date
1. Install Apache2, PHP and your favorite database (Mariadb recommended). A quick way to install LAMP is:


apt install apache2 mariadb-server php libapache2-mod-php php-mysql lsb-release gnupg2
_________________________________________________________________________________________________________________________________________
New install process with a shell script!
Become root with sudo su before running this!
Shell script file contents:
#!/bin/sh
clear
read -p "This script installs ZoneMinder 1.36.x on Debian 12 with LAMP (MySQL or Mariadb) installed...
This script must be run as root!
Press Enter to continue or Ctrl + c to quit" nothing
clear
apt install -y lsb-release gnupg2
echo "deb https://zmrepo.zoneminder.com/debian/release-1.36 "`lsb_release  -c -s`"/" | sudo tee /etc/apt/sources.list.d/zoneminder.list
wget -O - https://zmrepo.zoneminder.com/debian/archive-keyring.gpg | sudo apt-key add -
read -p "Warning! Check above to insure the line says OK. If not the GPG signing key was not installed and you will need to figure out why before continuing.
Press enter to continue" nothing
  apt update
  apt update
  apt upgrade
clear
  apt dist-upgrade
  apt install zoneminder --install-recommends -y
systemctl enable zoneminder
service zoneminder start
adduser www-data video
a2enconf zoneminder
a2enmod rewrite
a2enmod headers
a2enmod expires
service apache2 reload
clear
  read -p "Install complete. Open Zoneminder/Options and set the timezone. Press enter to continue" nothing
clear


===Install additional LAMP components Mariadb server (recommended)===


apt install php mariadb-server php-mysql apache2-mod-php7.0
Copy the contents of the script, open a terminal and run:


Secure Mariadb, create root password et. al.
nano zm-install


mysql_secure_installation
Paste the contents of the script into Nano


NOTE:The MySQL/MariaDB configuration file is located at: /etc/mysql/mysql.conf.d/mysqld.cnf To better manage the MariaDB server I recommend you move the config file and replace the default my.cnf symbolic link (this also works for MySQL 5.6).
Then:


rm /etc/mysql/my.cnf 
Ctrl + o Ctrl + x


cp /etc/mysql/mariadb.conf.d/50-server.cnf /etc/mysql/my.cnf
Next run:


'''The following change to Mariadb settings is optional but is included if you have problems logging into Zoneminder'''
chmod 755 zm-install


nano /etc/mysql/my.cnf
Start the script by entering:


Make the following changes:
./zm-install


character-set-server = latin1
Follow the prompts. Things are pretty simple. The timezone is now set in Zoneminder/Options.
collation-server = latin1_swedish_ci


Note: The above settings are actually the Mariadb default. Changing back to default is necessary to avoid errors when logging into Zoneminder. This was added on 01APR17 but is not an April Fool! It may be necessary to align these settings with your regional language.
Good Luck!  


Ctrl+o Enter to save
__________________________________________________________________________________________________________________________________________
Ctrl+x to exit
 
Old procedure retained for reference
 
Debian 12 Bookworm is released with Zoneminder 1.36.33 and as usual for Debian the zm database needs to be created manually.
 
'''Note: This version has been verified with Bookworm Debian 12 official release. A few issues have been found and corrected. Zoneminder now opens in Firefox (Windows, Linux and Android), Edge, Chrome (on Android). ZmNinja on Android also works. If using ZmNinja you may have to clear the API cache. Please report other errors on the Zoneminder forum.'''
 
In time a version of Zoneminder for Bookworm will be made available in the zmrepo.
 
You will have to install sudo and add the user to the sudoers file.
 
Become root with
 
su
 
Install sudo
 
apt install sudo
 
Then add the user
 
/sbin/adduser username sudo
 
I recommend rebooting at this point but a log out and back in also works.
 
Become root
 
sudo su
 
Timezone: it is recommended you set your specific timesone with:


Restart Mariadb
timedatectl set-timezone America/New_York


service mariadb restart
Of course use your timezone in place of America/New_York


===Install Zoneminder===
Install Apache2, PHP and your favorite database (Mariadb recommended). A quick way to install LAMP is:


Add the Deb Multimedia repository. (instructions at: https://deb-multimedia.org/)
apt install apache2 mariadb-server php libapache2-mod-php php-mysql lsb-release gnupg2


Edit sources.list
Add timezone to PHP (This may not be necessary but does not hurt and will allow the time of events to be displayed correctly)


  nano /etc/apt/sources.list
  nano /etc/php/8.2/apache2/php.ini


Add to the end of the file:
Search for [Date] (Ctrl + w then type Date and press Enter) and make changes as follows for your time zone


  deb http://www.deb-multimedia.org stretch main non-free
  [Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = America/New_York


Ctrl+o Enter to save
Ctrl+o Enter to save
Ctrl+x to exit


After you have added the necessary line in /etc/apt/sources.list the first package to install is deb-multimedia-keyring.
CTRL+x to exit


apt update
Restart Apache
apt install deb-multimedia-keyring


If apt-get can not find the new key, do that :
service apache2 restart


wget http://www.deb-multimedia.org/pool/main/d/deb-multimedia-keyring/deb-multimedia-keyring_2016.8.1_all.deb
or
dpkg -i deb-multimedia-keyring_2016.8.1_all.deb


Update packages list:
systemctl restart apache2


apt update
Install Zoneminder
apt upgrade
apt dist-upgrade


apt install zoneminder


Install Zoneminder
Create Zoneminder database in MySQL (Note: this also creates the default Zoneminder user and permissions in MySQL) Use the server root password when prompted.


  apt install zoneminder vlc-plugin-base php7.0-gd
  mysql -uroot -p < /usr/share/zoneminder/db/zm_create.sql


mysql -uroot -p -e "grant all on zm.* to 'zmuser'@localhost identified by 'zmpass';"


Set permissions of /etc/zm/zm.conf to root:www-data 740
mysqladmin -uroot -p reload


chmod 740 /etc/zm/zm.conf
Set permissions


chmod 640 /etc/zm/zm.conf
  chown root:www-data /etc/zm/zm.conf
  chown root:www-data /etc/zm/zm.conf
chown -R www-data:www-data /var/cache/zoneminder/
chmod 755 /var/cache/zoneminder/
Replace zoneminder.conf


cp /etc/apache2/conf-available/zoneminder.conf /etc/apache2/conf-available/zoneminder.conf.sav
rm /etc/apache2/conf-available/zoneminder.conf
nano /etc/apache2/conf-available/zoneminder.conf
Paste the following content into nano:
# Remember to enable cgi mod (i.e. "a2enmod cgi").
ScriptAlias /zm/cgi-bin "/usr/lib/zoneminder/cgi-bin"
<Directory "/usr/lib/zoneminder/cgi-bin">
    Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
    AllowOverride All
    Require all granted
</Directory>
# Order matters. This alias must come first.
Alias /zm/cache "/var/cache/zoneminder"
<Directory "/var/cache/zoneminder">
    Options -Indexes +FollowSymLinks
    AllowOverride None
    <IfModule mod_authz_core.c>
        # Apache 2.4
        Require all granted
    </IfModule>
</Directory>
Alias /zm /usr/share/zoneminder/www
<Directory /usr/share/zoneminder/www>
  Options -Indexes +FollowSymLinks
  <IfModule mod_dir.c>
    DirectoryIndex index.php
  </IfModule>
</Directory>
# For better visibility, the following directives have been migrated from the
# default .htaccess files included with the CakePHP project.
# Parameters not set here are inherited from the parent directive above.
<Directory "/usr/share/zoneminder/www/api">
    RewriteEngine on
    RewriteRule ^$ app/webroot/ [L]
    RewriteRule (.*) app/webroot/$1 [L]
    RewriteBase /zm/api
</Directory>
<Directory "/usr/share/zoneminder/www/api/app">
    RewriteEngine on
    RewriteRule ^$ webroot/ [L]
    RewriteRule (.*) webroot/$1 [L]
    RewriteBase /zm/api
</Directory>
<Directory "/usr/share/zoneminder/www/api/app/webroot">
    RewriteEngine On
    RewriteCond %{REQUEST_FILENAME} !-d
    RewriteCond %{REQUEST_FILENAME} !-f
    RewriteRule ^ index.php [L]
    RewriteBase /zm/api
</Directory>
Enable Zoneminder service to start at boot
Enable Zoneminder service to start at boot


Line 105: Line 243:
  systemctl start zoneminder.service
  systemctl start zoneminder.service


Check to see that Zoneminder is running
Enable Zoneminder configuration in Apache.


  systemctl status zoneminder.service
  a2enconf zoneminder
a2enmod rewrite
a2enmod headers
a2enmod expires
a2enmod cgi
service apache2 reload
 
Install complete. Open Zoneminder/Options and set the timezone in Options/System. Add cameras.
 
----------------------------------------------------------------------------------------------------------
==Debian 12 with Zoneminder 1.37.x==
Install Zoneminder Development Branch 1.37.x on Debian 12


Enable CGI and Zoneminder configuration in Apache.
You will have to install sudo and add the user to the sudoers file.  


a2enmod cgi
Become root with


  a2enmod rewrite
  su


a2enconf zoneminder
Install sudo


Add timezone to PHP
apt install sudo


sed -i "s/;date.timezone =/date.timezone = $(sed 's/\//\\\//' /etc/timezone)/g" /etc/php/7.0/apache2/php.ini
Then add the user


Change permissions in /usr/share/zoneminder/
/sbin/adduser username sudo


chown -R www-data:www-data /usr/share/zoneminder/
I recommend rebooting at this point but a log out and back in also works.


Install Apache2, PHP and your favorite database (Mariadb recommended). A quick way to install LAMP is:


Restart Apache
apt install apache2 mariadb-server php libapache2-mod-php php-mysql lsb-release gnupg2


service apache2 restart


Open Zoneminder in a web browser (http://server-ip/zm).
Become root with sudo su before running this!


10OCT17 - An issue with the /tmp/zm directory has been reported. Debian uses private tmp folders so even though you can see the files & folders, zoneminder cannot because it is running under a different user account.
Shell script file contents:


Go to Options -> Paths and then inspect each PATH_XXX variable. If it is set to "/tmp/zm", change it to "/dev/shm". Don't forget to restart zoneminder.
#!/bin/sh
clear
read -p "This script installs ZoneMinder 1.37.x on Debian 12 with LAMP (MySQL or Mariadb) installed...
This script must be run as root!
Press Enter to continue or Ctrl + c to quit" nothing
clear
apt install -y lsb-release gnupg2
echo "deb https://zmrepo.zoneminder.com/debian/master "`lsb_release  -c -s`"/" | sudo tee /etc/apt/sources.list.d/zoneminder.list
wget -O - https://zmrepo.zoneminder.com/debian/archive-keyring.gpg | sudo apt-key add -
read -p "Warning! Check above to insure the line says OK. If not the GPG signing key was not installed and you will need to figure out why before continuing.
Press enter to continue" nothing
apt update
clear
apt install -y zoneminder
systemctl enable zoneminder
service zoneminder start
adduser www-data video
a2enconf zoneminder
a2enmod rewrite
a2enmod headers
a2enmod expires
service apache2 reload
clear
read -p "Install complete. Open Zoneminder/Options and set the timezone. Press enter to continue" nothing
clear


===Alternate install MySQL Server===
Note: Install of MySQL was not tested with the Debian 9.0.0 release but should work based on past experience


apt install php default-mysql-server php-mysql apache2-mod-php7.0
Copy the contents of the script, open a terminal and run:


Make a change to MySQL settings: (Note: Your my.cnf may be in another location)
nano zm-install


nano /etc/mysql/my.cnf
Paste the contents of the script into Nano


In the [mysqld] section add the following
Then:


  sql_mode = NO_ENGINE_SUBSTITUTION
  Ctrl + o Ctrl + x


Note: if you are installing on an existing database server you can use the following as an alternate to 'sql_mode = NO_ENGINE_SUBSTITUTION' (Thanks to "bodom" for this alternate):
Next run:


  init_connect = 'SET @@sql_mode = CASE CURRENT_USER() WHEN \'zmuser@localhost\' THEN \'NO_ENGINE_SUBSTITUTION\' ELSE @@sql_mode END;'
  chmod 755 zm-install


Ctrl+o Enter to save
Start the script by entering:
Ctrl+x to exit


Restart MySQL
./zm-install


systemctl restart mysql
Follow the prompts. Things are pretty simple. The timezone is now set in Zoneminder/Options.


Continue with Zoneminder install https://wiki.zoneminder.com/Debian_9_64-bit_with_Zoneminder_1.30.4_the_Easy_Way#Install_Zoneminder
Good Luck!

Latest revision as of 18:47, 24 August 2024


Debian 12 with Zoneminder 1.36.34

Debian 12 has been released with Zoneminder 1.36.33 and as usual for Debian the zm database needs to be created manually. This is not user friendly. So we will be using the packages provided by the ZoneMinder development team hosted at zmrepo.zoneminder.com.

Debian, unlike Ubuntu, does not install sudo with the initial setup. While you can log in as root, a user with sudo authority is recommended.

To enable sudo: In a terminal,become root with su. Enter your root password. Install sudo with: 

apt install sudo

Add the user account to the group sudo with: 

/sbin/adduser username sudo

where username is your user account. Exit root then log out and then log in with the same user. Become root: 

sudo su

Timezone: it is recommended you set your specific timesone with: 

timedatectl set-timezone America/New_York

Of course use your timezone in place of America/New_York.

1. Install Apache2, PHP and your favorite database (Mariadb recommended). A quick way to install LAMP is: 

apt install apache2 mariadb-server php libapache2-mod-php php-mysql lsb-release gnupg2

_________________________________________________________________________________________________________________________________________

New install process with a shell script!

Become root with sudo su before running this!

Shell script file contents: 

#!/bin/sh
clear
read -p "This script installs ZoneMinder 1.36.x on Debian 12 with LAMP (MySQL or Mariadb) installed...
This script must be run as root!
Press Enter to continue or Ctrl + c to quit" nothing
clear
apt install -y lsb-release gnupg2
echo "deb https://zmrepo.zoneminder.com/debian/release-1.36 "`lsb_release  -c -s`"/" | sudo tee /etc/apt/sources.list.d/zoneminder.list
wget -O - https://zmrepo.zoneminder.com/debian/archive-keyring.gpg | sudo apt-key add -
read -p "Warning! Check above to insure the line says OK. If not the GPG signing key was not installed and you will need to figure out why before continuing. 
Press enter to continue" nothing
apt update
clear
apt install zoneminder --install-recommends -y
systemctl enable zoneminder
service zoneminder start
adduser www-data video
a2enconf zoneminder
a2enmod rewrite
a2enmod headers
a2enmod expires
service apache2 reload
clear
read -p "Install complete. Open Zoneminder/Options and set the timezone. Press enter to continue" nothing
clear


Copy the contents of the script, open a terminal and run: 

nano zm-install

Paste the contents of the script into Nano

Then:

Ctrl + o Ctrl + x

Next run: 

chmod 755 zm-install

Start the script by entering:

./zm-install

Follow the prompts. Things are pretty simple. The timezone is now set in Zoneminder/Options.

Good Luck!

__________________________________________________________________________________________________________________________________________

Old procedure retained for reference

Debian 12 Bookworm is released with Zoneminder 1.36.33 and as usual for Debian the zm database needs to be created manually.

Note: This version has been verified with Bookworm Debian 12 official release. A few issues have been found and corrected. Zoneminder now opens in Firefox (Windows, Linux and Android), Edge, Chrome (on Android). ZmNinja on Android also works. If using ZmNinja you may have to clear the API cache. Please report other errors on the Zoneminder forum.

In time a version of Zoneminder for Bookworm will be made available in the zmrepo.

You will have to install sudo and add the user to the sudoers file.

Become root with 

su

Install sudo 

apt install sudo

Then add the user 

/sbin/adduser username sudo

I recommend rebooting at this point but a log out and back in also works.

Become root 

sudo su

Timezone: it is recommended you set your specific timesone with: 

timedatectl set-timezone America/New_York

Of course use your timezone in place of America/New_York

Install Apache2, PHP and your favorite database (Mariadb recommended). A quick way to install LAMP is: 

apt install apache2 mariadb-server php libapache2-mod-php php-mysql lsb-release gnupg2

Add timezone to PHP (This may not be necessary but does not hurt and will allow the time of events to be displayed correctly) 

nano /etc/php/8.2/apache2/php.ini

Search for [Date] (Ctrl + w then type Date and press Enter) and make changes as follows for your time zone 

[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
date.timezone = America/New_York

Ctrl+o Enter to save

CTRL+x to exit

Restart Apache 

service apache2 restart

or 

systemctl restart apache2

Install Zoneminder 

apt install zoneminder

Create Zoneminder database in MySQL (Note: this also creates the default Zoneminder user and permissions in MySQL) Use the server root password when prompted. 

mysql -uroot -p < /usr/share/zoneminder/db/zm_create.sql

mysql -uroot -p -e "grant all on zm.* to 'zmuser'@localhost identified by 'zmpass';"

mysqladmin -uroot -p reload

Set permissions 

chmod 640 /etc/zm/zm.conf

chown root:www-data /etc/zm/zm.conf

chown -R www-data:www-data /var/cache/zoneminder/

chmod 755 /var/cache/zoneminder/

Replace zoneminder.conf 

cp /etc/apache2/conf-available/zoneminder.conf /etc/apache2/conf-available/zoneminder.conf.sav

rm /etc/apache2/conf-available/zoneminder.conf

nano /etc/apache2/conf-available/zoneminder.conf

Paste the following content into nano: 

# Remember to enable cgi mod (i.e. "a2enmod cgi").
ScriptAlias /zm/cgi-bin "/usr/lib/zoneminder/cgi-bin"
<Directory "/usr/lib/zoneminder/cgi-bin">
    Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch
    AllowOverride All
    Require all granted
</Directory>


# Order matters. This alias must come first.
Alias /zm/cache "/var/cache/zoneminder"
<Directory "/var/cache/zoneminder">
    Options -Indexes +FollowSymLinks
    AllowOverride None
    <IfModule mod_authz_core.c>
        # Apache 2.4
        Require all granted
    </IfModule>
</Directory>

Alias /zm /usr/share/zoneminder/www
<Directory /usr/share/zoneminder/www>
  Options -Indexes +FollowSymLinks
  <IfModule mod_dir.c>
    DirectoryIndex index.php
  </IfModule>
</Directory>

# For better visibility, the following directives have been migrated from the
# default .htaccess files included with the CakePHP project.
# Parameters not set here are inherited from the parent directive above.
<Directory "/usr/share/zoneminder/www/api">
   RewriteEngine on
   RewriteRule ^$ app/webroot/ [L]
   RewriteRule (.*) app/webroot/$1 [L]
   RewriteBase /zm/api
</Directory>

<Directory "/usr/share/zoneminder/www/api/app">
   RewriteEngine on
   RewriteRule ^$ webroot/ [L]
   RewriteRule (.*) webroot/$1 [L]
   RewriteBase /zm/api
</Directory>

<Directory "/usr/share/zoneminder/www/api/app/webroot">
    RewriteEngine On
    RewriteCond %{REQUEST_FILENAME} !-d
    RewriteCond %{REQUEST_FILENAME} !-f
    RewriteRule ^ index.php [L]
    RewriteBase /zm/api
</Directory>

Enable Zoneminder service to start at boot 

systemctl enable zoneminder.service

Add www-data to the sudo group (to enable use of local video devices) 

adduser www-data video

Start Zoneminder 

systemctl start zoneminder.service

Enable Zoneminder configuration in Apache. 

a2enconf zoneminder

a2enmod rewrite

a2enmod headers

a2enmod expires

a2enmod cgi

service apache2 reload

Install complete. Open Zoneminder/Options and set the timezone in Options/System. Add cameras.

Debian 12 with Zoneminder 1.37.x

Install Zoneminder Development Branch 1.37.x on Debian 12

You will have to install sudo and add the user to the sudoers file.

Become root with 

su

Install sudo 

apt install sudo

Then add the user 

/sbin/adduser username sudo

I recommend rebooting at this point but a log out and back in also works.

Install Apache2, PHP and your favorite database (Mariadb recommended). A quick way to install LAMP is: 

apt install apache2 mariadb-server php libapache2-mod-php php-mysql lsb-release gnupg2


Become root with sudo su before running this!

Shell script file contents: 

#!/bin/sh
clear
read -p "This script installs ZoneMinder 1.37.x on Debian 12 with LAMP (MySQL or Mariadb) installed...
This script must be run as root!
Press Enter to continue or Ctrl + c to quit" nothing
clear
apt install -y lsb-release gnupg2
echo "deb https://zmrepo.zoneminder.com/debian/master "`lsb_release  -c -s`"/" | sudo tee /etc/apt/sources.list.d/zoneminder.list
wget -O - https://zmrepo.zoneminder.com/debian/archive-keyring.gpg | sudo apt-key add -
read -p "Warning! Check above to insure the line says OK. If not the GPG signing key was not installed and you will need to figure out why before continuing. 
Press enter to continue" nothing
apt update
clear
apt install -y zoneminder
systemctl enable zoneminder
service zoneminder start
adduser www-data video
a2enconf zoneminder
a2enmod rewrite
a2enmod headers
a2enmod expires
service apache2 reload
clear
read -p "Install complete. Open Zoneminder/Options and set the timezone. Press enter to continue" nothing
clear


Copy the contents of the script, open a terminal and run: 

nano zm-install

Paste the contents of the script into Nano

Then: 

Ctrl + o Ctrl + x

Next run: 

chmod 755 zm-install

Start the script by entering: 

./zm-install

Follow the prompts. Things are pretty simple. The timezone is now set in Zoneminder/Options.

Good Luck!

Retrieved from "http://wiki.staging.zoneminder.com/index.php?title=Debian_12_Bookworm_with_Zoneminder_1.36.x_and_1.37.x&oldid=17395"