Difference between revisions of "Dedicated RPI Camera Monitor"
From ZoneMinder Wiki
Jump to navigationJump to search
(Created page with "Following the similar Dedicated_SBC_Camera_Monitor guide, I'll do the same thing with a Raspberry Pi model 3, and Devuan Ascii, this time (migrated from Debian Stretch Lit...") |
|||
| Line 8: | Line 8: | ||
Before installing sysvinit-core I created an /etc/network/interfaces file with the following | Before installing sysvinit-core I created an /etc/network/interfaces file with the following | ||
tab did not exist. | |||
auto eth0 | auto eth0 | ||
iface eth0 inet dhcp | iface eth0 inet dhcp | ||
i | |||
Before rebooting, after apt-get install sysvinit-core, make sure /etc/inittab exists, and has startup data. | |||
I've had issues where, when migrating a VPS to devuan Jessie, inittab did not exist, and the VPS would fail to boot. | |||
Revision as of 22:04, 22 August 2018
Following the similar Dedicated_SBC_Camera_Monitor guide, I'll do the same thing with a Raspberry Pi model 3, and Devuan Ascii, this time (migrated from Debian Stretch Lite)
First, image the Debian Stretch Lite to your SD card
Boot up and enable ssh, change your password, and apt-get update && apt-get dist-upgrade
Now migrate following these instructions [1]
Before installing sysvinit-core I created an /etc/network/interfaces file with the following tab did not exist. auto eth0 iface eth0 inet dhcp i Before rebooting, after apt-get install sysvinit-core, make sure /etc/inittab exists, and has startup data. I've had issues where, when migrating a VPS to devuan Jessie, inittab did not exist, and the VPS would fail to boot.
