Difference between revisions of "Toshiba"
From ZoneMinder Wiki
Jump to navigationJump to search
m (→IK-WD01A) |
|||
| Line 1: | Line 1: | ||
=IK-WD01A= | = IK-WD01A = | ||
Source type: Remote | Source type: Remote | ||
Remote Host Name: IP Address of Camera | Remote Host Name: IP Address of Camera | ||
Remote Host Port: 80 (Default) or the non-default port assigned to the camera in your network | Remote Host Port: 80 (Default) or the non-default port assigned to the camera in your network | ||
Remote | Remote Host Path: /video2.mjpg | ||
The camera can be configured to provide two video streams within the camera's configuration web page (http://<camera-ip>/setup/audiovideo.html). The above example connects to stream 2, which is configured on the camera as JPEG mode. Be sure that the frame size indicated on the camera configuration matches that in the ZoneMinder configuration. Frame rate is dependent on ambient lighting conditions, and is typically 20fps for nominal indoor ambient lighting and as high as 40fps outdoors. | |||
= IK-WB02A = | |||
This camera works pretty good once you use Internet Exploder to configure it (lots of ActiveX). | |||
Set '''Remote Host Path''' to '''/Jpeg/CamImg.jpg''' | |||
[[Category:Cameras]] | [[Category:Cameras]] | ||
Revision as of 12:32, 9 March 2009
IK-WD01A
Source type: Remote Remote Host Name: IP Address of Camera Remote Host Port: 80 (Default) or the non-default port assigned to the camera in your network Remote Host Path: /video2.mjpg
The camera can be configured to provide two video streams within the camera's configuration web page (http://<camera-ip>/setup/audiovideo.html). The above example connects to stream 2, which is configured on the camera as JPEG mode. Be sure that the frame size indicated on the camera configuration matches that in the ZoneMinder configuration. Frame rate is dependent on ambient lighting conditions, and is typically 20fps for nominal indoor ambient lighting and as high as 40fps outdoors.
IK-WB02A
This camera works pretty good once you use Internet Exploder to configure it (lots of ActiveX). Set Remote Host Path to /Jpeg/CamImg.jpg
