Difference between revisions of "Hikvision"
Kingster80 (talk | contribs) m |
|||
| Line 25: | Line 25: | ||
[[Hikvision_DS_2CD2732FIS|Hikvision DS-2CD2732F-I(S) Megapixel Outdoor IP Dome Camera]] | [[Hikvision_DS_2CD2732FIS|Hikvision DS-2CD2732F-I(S) Megapixel Outdoor IP Dome Camera]] | ||
[[Hikvision_DS-2CD2532F-IWS|Hikvision DS-2CD2532F-IWS 3MP Outdoor IP Mini Dome Camera]] | |||
Revision as of 20:58, 8 August 2014
These seem to work. The biggest problem is people trying to use 'network camera' instead of 'ffmpeg' source type. Both have rtsp but only ffmpeg works here (because of h.264?) see [[1]]
The DS-2CD2732F-I and DS-2CD2032-I are tested
Videostream:
General Tab
- Source Type : Ffmpeg
Source Tab
- Source Path : rtsp://<username>:<password>@<ip_address>:<port>/Streaming/Channels/1?tcp
(example: rtsp://admin:12345@mycamera.mydomain.com//Streaming/Channels/1)
- Target Colorspace : 24 bit colour
- Capture Width (pixels) : 1280 (set these to match camera config)
- Capture Height (pixels) : 720
I also had to set max FPS slightly higher than set in camera, or i lost the lower half of the frame. (Camera seems to send 10.6fps when 10 is selected)
The following URL gives another Source path that was far more stable on Zoneminder 1.25: http://onlinetechadvice.blogspot.com/2014/04/hikvision-ds-2cd2032-i-working-in.html#comment-form
The Source path that worked for me is: rtsp://username:password@XXX.XXX.XXX.XXX:554/cam/realmonitor?channel=1&subtype=0?tcp Of course, replace username and password and port with your specific installation information.
