Difference between revisions of "Ubuntu Server 19.04 Zoneminder 1.32.3"

From ZoneMinder Wiki
Jump to navigationJump to search
m
m
Line 68: Line 68:


  start() {
  start() {
    sleep 15
        sleep 15
echo -n "Starting $prog: "
echo -n "Starting $prog: "



Revision as of 14:54, 20 October 2014

Zoneminder 1.28.0 on Ubuntu 14.04

I did this install on a 64 BIT server but it should work on 32 BIT

If you install from CD install Ubuntu Server, OpenSSH Server, and LAMP Server (LAMP installs Apache2, PHP, and MySQL server)

If you use the minimum ISO CD install Basic Server, OpenSSH Server, and LAMP Server (LAMP installs Apache2, PHP, and MySQL server)

Log in then become root:

sudo su

If you used the server install CD

apt-get update
apt-get upgrade
apt-get dist-upgrade

Optional: Set static IP address

nano /etc/network/interfaces

Make changes similar to this:

auto eth0
iface eth0 inet static
  address 192.168.1.10
  netmask 255.255.255.0
  gateway 192.168.1.1
  dns-nameservers 192.168.1.1

Note: for Ubuntu 14.04 the resolv.conf is dynamically assigned. The "dns-servers" entry in the interfaces file will set the DNS Multiple DNS server entries can be used.

Reboot server

CGI is not enabled in Ubuntu 14.04 by default. Enable it this way:

a2enmod cgi

Restart Apache

/etc/init.d/apache2 force-reload 

or

service apache2 restart

Add Repository

apt-get install python-software-properties
add-apt-repository ppa:iconnor/zoneminder
apt-get update

Install Zoneminder

apt-get install zoneminder

Note: a couple of package configurations will open up. These are to configure Nullmailer. You can just OK them and come back to configure them later.

You may need to install "extra" VLC components (I will check this and edit as needed)

apt-get install libvlc-dev libvlccore-dev vlc

Add delay to allow MySQL to start before Zoneminder

nano /etc/init.d/zoneminder

Add sleep 15 as shown:

start() {
       sleep 15

echo -n "Starting $prog: "

Ctrl+o Enter to save

CTRL+x to exit

Create a directory in apache2

mkdir /etc/apache2/conf.d

Create two symbolic links

ln -s /etc/zm/apache.conf /etc/apache2/conf.d/zoneminder.conf
ln -s /etc/zm/apache.conf /etc/apache2/conf-enabled/zoneminder.conf


Create a new user

adduser www-data video

Restart Apache

/etc/init.d/apache2 force-reload 

or

service apache2 restart


Install Cambozola (needed if you use Internet Explorer)


cd /usr/src && wget http://www.andywilcock.com/code/cambozola/cambozola-latest.tar.gz
tar -xzvf cambozola-latest.tar.gz
replace 935 with cambozola version downloaded
cp cambozola-0.935/dist/cambozola.jar /usr/share/zoneminder

You should now be able to access the web server using https://servername

NTP Daily Sync

nano /etc/cron.daily/ntpdate

Copy the following into nano

!/bin/sh ntpdate ntp.ubuntu.com

Ctrl+o Enter to save

CTRL+x to exit

chmod 755 /etc/cron.daily/ntpdate

Open Zoneminder in web browser

http://serverip/zm

Click Options

Uncheck: Check with zoneminder.com for updated versions (?) click Save

Click Images tab

check Is the (optional) cambozola java streaming client installed (?) Click Save