Difference between revisions of "Beaglebone Black"
| Line 1: | Line 1: | ||
Materials: | ''Materials:'' | ||
| Line 7: | Line 7: | ||
Steps: | ''Steps:'' | ||
| Line 19: | Line 19: | ||
* Local | |||
* | ''Zoneminder settings:'' | ||
* 960 | * Source: Local | ||
* | * Maximum FPS: 3 | ||
* Device Path: /dev/video0 | |||
* Capture Method: Video for Linux 2 | |||
* Device Format: PAL | |||
* Capture Palette: *MJPEG | |||
* Capture Width (pixels): 960 | |||
* Capture Height (pixels): 720 | |||
Total load with camera, gets about 960x720 3FPS, with .7 load on the server, in monitor mode. Making this a potential external ZM server. | Total load with camera, gets about 960x720 3FPS, with .7 load on the server, in monitor mode. Making this a potential external ZM server. | ||
YUYV works with resolution of 320x240, but no higher. MJPG is able to get 320x240, 640x480, and 960x720. | YUYV works with resolution of 320x240, but no higher. MJPG is able to get 320x240, 640x480, and 960x720. I put the wrong resolution in during MJPEG mode, but the ZM logs happily told me that the 'correct' resolution available was 960x720, so I used that, and all worked. | ||
| Line 33: | Line 39: | ||
''Notes:'' | |||
* I ran into problems using this BBB with a long (>25 ft) ethernet cable. Network functions were slow, or failing. This could be a problem if you were to use these as substitutes for cameras. It may have been my particular model (BBB Element14 industrial). A shorter cable resolved all issues. | |||
Revision as of 14:16, 25 December 2016
Materials:
Beaglebone Black Industrial
Logitech C545 webcam
Steps:
Installed Debian Jessie via a netinstall from Elinux.org BeagleBoardDebian. Used serial port. Migrated to Devuan. Installed Zoneminder using jessie-backports according to official install guide.
Industrial BBB was chosen, in the hopes of using it as a dashcam under winter conditions.
Camera works plugged into USB. Logitech camera works under the following settings
Zoneminder settings:
- Source: Local
- Maximum FPS: 3
- Device Path: /dev/video0
- Capture Method: Video for Linux 2
- Device Format: PAL
- Capture Palette: *MJPEG
- Capture Width (pixels): 960
- Capture Height (pixels): 720
Total load with camera, gets about 960x720 3FPS, with .7 load on the server, in monitor mode. Making this a potential external ZM server.
YUYV works with resolution of 320x240, but no higher. MJPG is able to get 320x240, 640x480, and 960x720. I put the wrong resolution in during MJPEG mode, but the ZM logs happily told me that the 'correct' resolution available was 960x720, so I used that, and all worked.
This being an SBC, there is a additional interfaces, expansions (I2C, GPIO) to use in addition to the camera itself. Sensors can be added easily.
Notes:
- I ran into problems using this BBB with a long (>25 ft) ethernet cable. Network functions were slow, or failing. This could be a problem if you were to use these as substitutes for cameras. It may have been my particular model (BBB Element14 industrial). A shorter cable resolved all issues.
