Difference between revisions of "Kodicom 4400r"
m (Added information how to setup two cards) |
|||
| Line 19: | Line 19: | ||
Greg | Greg | ||
Two Cards in a single box **** | |||
Two 4400r cards - labeled as se-120 (4 8778 chips/card) | Two 4400r cards - labeled as se-120 (4 8778 chips/card) | ||
In an IBM 342 Server | In an IBM 342 Server | ||
| Line 35: | Line 34: | ||
/dev/video6 channel 2 | /dev/video6 channel 2 | ||
/dev/video7 channel 3 | /dev/video7 channel 3 | ||
Revision as of 09:46, 21 June 2006
Add modprobe bttv gbuffers=16 card=133,132,133,133
or edit your modprobe.conf to include
options bttv gbuffers=16 card=133,132,133,133
requires a 2.6.12 kernel but fully supported in a 2.6.13 I tried and failed on the 2.6.12 but succeeded on the 2.6.13
James Wilson
KMC-4400r
http://www.anko-tech.com/products/
While setting up a new server I omitted the "card=" and had the 133,132,133,133. This resulted in just blue screens. Once I figured out I had omitted the phrase "card=" and add it the card worked. Greg
Two Cards in a single box **** Two 4400r cards - labeled as se-120 (4 8778 chips/card) In an IBM 342 Server FC4
It is setup with : /dev/video0 channel 0 /dev/video1 channel 1 /dev/video2 channel 2 /dev/video3 channel 3
/dev/video4 channel 0 /dev/video5 channel 1 /dev/video6 channel 2 /dev/video7 channel 3
- modprobe.conf
alias eth0 e100 alias scsi_hostadapter aic7xxx alias scsi_hostadapter1 ips alias char-major-81 bttv alias usb-controller ohci-hcd options bttv gbuffers=32 card=0x85,0x84,0x85,0x85,0x85,0x84,0x85,0x85 tuner=-1
