Difference between revisions of "Kodicom 4400r"
(Readability edit) |
|||
| Line 31: | Line 31: | ||
#modprobe.conf<br> | #modprobe.conf<br> | ||
alias char-major-81 bttv<br> | alias char-major-81 bttv<br> | ||
options bttv gbuffers=32 card=0x85,0x84,0x85,0x85,0x85,0x84,0x85,0x85 tuner=-1<br> | options bttv gbuffers=32 card=0x85,0x84,0x85,0x85,0x85,0x84,0x85,0x85 tuner=-1<br> | ||
Revision as of 15:08, 27 June 2006
Add
modprobe bttv gbuffers=16 card=133,132,133,133
or
edit your modprobe.conf to include
options bttv gbuffers=16 card=133,132,133,133
requires a 2.6.12 kernel but fully supported in a 2.6.13
I tried and failed on the 2.6.12 but succeeded on the 2.6.13
- James Wilson
Anko-tech the manufacturer of the card
KMC-4400r
http://www.anko-tech.com/products
While setting up a new server I omitted the "card=" and had the 133,132,133,133.
This resulted in just blue screens. Once I figured out I had omitted the phrase "card=" and add it the card worked.
Greg
Two Cards in a single box ****
Two 4400r cards - labeled as se-120 (4 8778 chips/card). In an IBM 342 Server. FC4
It is setup with :
/dev/video0 channel 0
/dev/video1 channel 1
/dev/video2 channel 2
/dev/video3 channel 3
/dev/video4 channel 0
/dev/video5 channel 1
/dev/video6 channel 2
/dev/video7 channel 3
- modprobe.conf
alias char-major-81 bttv
options bttv gbuffers=32 card=0x85,0x84,0x85,0x85,0x85,0x84,0x85,0x85 tuner=-1
