Difference between revisions of "Wgcc"
From ZoneMinder Wiki
Jump to navigationJump to search
Autotravis (talk | contribs) (Created page with "200px [https://amzn.to/2tzeVu5 WGCC Dome POE IP Camera Onvif 4MP 2.8mm Wide Angle IP Exterior Camera Indoor Outdoor Wired PoE Network Came...") |
Autotravis (talk | contribs) |
||
| Line 8: | Line 8: | ||
* Source Type: ffmpeg | * Source Type: ffmpeg | ||
* Source Path: rtsp://[camera's IP]:554 | * Source Path: rtsp://[camera's IP]:554 (I turned off the security on the camera, but with it on it would be rtsp://admin:admin@[camera's IP]:554) | ||
* Method: TCP | * Method: TCP | ||
* Capture Resolution: 1920x1080 (I also changed this in the camera's settings. It worked fine at 4MP but I didn't need that high of resolution) | * Capture Resolution: 1920x1080 (I also changed this in the camera's settings. It worked fine at 4MP but I didn't need that high of resolution) | ||
This is my first camera and experience with ZoneMinder. The default zone definition was not catching motion. I changed the units from percent to pixels and minimum alarm area to 10,000 pixels (out of 2228840 total in my alarm area). This is perfect. Absolutely 0 false alarms and no missed motion that I care about (detects my 30 lb dog at 50 ft). | This is my first camera and experience with ZoneMinder. The default zone definition was not catching motion. I changed the units from percent to pixels and minimum alarm area to 10,000 pixels (out of 2228840 total in my alarm area). This is perfect. Absolutely 0 false alarms and no missed motion that I care about (detects my 30 lb dog at 50 ft). | ||
Latest revision as of 19:07, 22 January 2020
I have this camera set up with ZoneMinder 1.34.0
- Source Type: ffmpeg
- Source Path: rtsp://[camera's IP]:554 (I turned off the security on the camera, but with it on it would be rtsp://admin:admin@[camera's IP]:554)
- Method: TCP
- Capture Resolution: 1920x1080 (I also changed this in the camera's settings. It worked fine at 4MP but I didn't need that high of resolution)
This is my first camera and experience with ZoneMinder. The default zone definition was not catching motion. I changed the units from percent to pixels and minimum alarm area to 10,000 pixels (out of 2228840 total in my alarm area). This is perfect. Absolutely 0 false alarms and no missed motion that I care about (detects my 30 lb dog at 50 ft).
