Difference between revisions of "Hauppauge ImpactVCB"
From ZoneMinder Wiki
Jump to navigationJump to search
m (Hauppauge/Hauppauge ImpactVCB moved to Hauppauge ImpactVCB: opps) |
|||
| Line 7: | Line 7: | ||
This card is now supported in the 2.6.16 kernel as card 143 and should autodetect. | This card is now supported in the 2.6.16 kernel as card 143 and should autodetect. | ||
Note that the card ships with either an NTSC (26Mhz) or a PAL (35MHz) crystal. The driver assumes that your camera format matches the crystal. If it does not, you will get no colour and/or loss of picture lock. Fortunately the card can synthesise one frequency from the other, but has to be told to do so with the option | |||
bttv pll=1 (for NTSC crystal ->PAL camera) | |||
bttv pll=2 (for PAL->NTSC) | |||
Revision as of 16:56, 5 November 2007
Hauppauge ImpactVCB use the same drivers as the Osprey 100
http://www.bttv-gallery.de/Hauppauge_Impact_VCB_Model.jpg
Modprobe.conf option
options bttv card=82 tuner=4
This card is now supported in the 2.6.16 kernel as card 143 and should autodetect.
Note that the card ships with either an NTSC (26Mhz) or a PAL (35MHz) crystal. The driver assumes that your camera format matches the crystal. If it does not, you will get no colour and/or loss of picture lock. Fortunately the card can synthesise one frequency from the other, but has to be told to do so with the option
bttv pll=1 (for NTSC crystal ->PAL camera) bttv pll=2 (for PAL->NTSC)
