Difference between revisions of "Airlink 101"
| Line 2: | Line 2: | ||
Remote Protocol: HTTP | Remote Protocol: HTTP | ||
Remote Method: Simple | Remote Method: Simple | ||
Remote Host Name: {username}:{password}@{camera ip} | Remote Host Name: {username}:{password}@{camera ip} | ||
Remote Host Port: 80 | Remote Host Port: 80 | ||
Remote Host Path: /cgi/mjpg/mjpg.cgi | Remote Host Path: /cgi/mjpg/mjpg.cgi | ||
Remote Image colors: 24 bit | Remote Image colors: 24 bit | ||
Capture Width: 640 | Capture Width: 640 | ||
Capture Height: 480 | Capture Height: 480 | ||
http://www.zoneminder.com/forums/viewtopic.php?t=14094 | http://www.zoneminder.com/forums/viewtopic.php?t=14094 | ||
== AIC250W == | == AIC250W == | ||
Revision as of 14:34, 8 September 2009
Airlink Skyipcam777w
Remote Protocol: HTTP
Remote Method: Simple
Remote Host Name: {username}:{password}@{camera ip}
Remote Host Port: 80
Remote Host Path: /cgi/mjpg/mjpg.cgi
Remote Image colors: 24 bit
Capture Width: 640
Capture Height: 480
http://www.zoneminder.com/forums/viewtopic.php?t=14094
AIC250W
Airlink101 AIC250 settings for 2 fps as JPG stream: to use this camera with Zoneminder with JPG stream, use these settings for the Monitor: "hostname = <ip of camera>", "path = /video.jpg", use these settings for Options: "ffmpeg" as encoder, "jpg" stream and not mpeg. Select the right resolution for the camera, such as 640x480. To set the resolution for the camera, use a web browser and go to the configuration pages http://<ip of camera>. While in the configuration pages, delete the username and password to get the camera to work with these settings. Save the camera configuration.
AIC250W - Just remember to turn off PCRE processing in the Options > Network tab. http://x.x.x.x/video.cgi gives 10 fps 640 x 480 mjpeg feed. Same camera as D-Link DCS-900W / TrendNet IP-200
Airlink101 SkyIPCam 747W
The device requires authentication, so you need to provide the Remote Host Name parameter with <username>:<password>@mycamip
/cgi/jpg/image.cgi
http://www.zoneminder.com/forums/viewtopic.php?t=12238&highlight=cameras
AICN747/AICN747W
Same Camera as Fitivision CS-130A/CS-131A and TrendNet TV-IP410/TV-IP410W. The 'W'/CS-131A version is wireless. Note: the Trendnet cameras have no built-in IR illumination.
hostname = <username>:<password>@<ip of camera> path = /cgi/jpg/image.cgi for JPEG stills, or /cgi/mjpg/mjpeg.cgi for MJPEG (MJPEG mode doesn't return the correct MIME type, and thus doesn't appear to work with ZM)
PTZ module details: SkyIPCam 7xx ZM Module and Audio dump script
