Sony

Link to the Sony SNC patches for 1.22.1: zm_remote_camera-patches.tgz

Excerpt from the forum post regarding setup:

For now, you must set the camera to the following configuration using (gulp) Internet Explorer:

MJPEG Mode 320x240 Image size Frame rate 5 (or another value of your choice - just remember it for creating the monitor - the values must match for now) Microphone disabled

Then, you can create a new monitor with the following values:

General Name: <Your Choice> Source: Remote Function: Monitor Maximum FPS: 5 (or the value you set with Internet Explorer)

Source Remote Host Name: username:password@<camera ip address> Remote Host Port: <camera remote port> (usually 9000 unless you changed) Remote Host Path: /mjpeg?speed=5 (or the speed value you set with Internet Explorer) Remote Image Colours: 24 bit colour Capture Width: 320 Capture Height: 240

Once that's set, you should see video when you watch the new monitor!