ZMTrigger
About
/usr/bin/zmtrigger.pl (debian location) is an optional program for Zoneminder that listens on the network for commands. Read the perl script for more information.
One way it can be used is to overlay text information from an external source (e.g. temperature sensor) onto the video feed. It can also be used as an external trigger source for cameras. By using an external trigger source, you can avoid some of the problems inherent in ZM modect - false alarms, and CPU use. False alarms are commonly caused when the video feed has a change come across it, such as weather events, wildlife, or the transition from daylight filter to night ir filter. An external trigger source might be one or more of a PIR, Microwave, or Ultrasonic sensor.
Note that if you have a house, or single breaker, you might want to consider using X10 for Zoneminder. This will save you the need for ethernet wiring, or setting up wifi.
Configuration
Enable it first, by going into options, config, and checking Enable Triggers.
Then
# service restart zoneminder
Verify it is running with
ps auxw | grep zmtrigger
Usage
Overlaying Text Data onto a Video Feed
After you have verified the script is running, test it is working.
Choose a monitor by monitor ID, say monitor 1, then add %Q to the monitors timestamp section.
The monitor must be in either modect, mocord, or nodect mode.
Open the video feed for monitor 1.
Then type in another terminal
telnet ipaddress 6802
in the telnet session type the following
1|show||||testingOSD
then press return.
Refer to Documentation for what this command means. A brief explanation for this is:
MonitorID # | Show text mode |||| text to put in.
You should immediately see testingOSD in place of the %Q you put in the timestamps section.
For more examples and scripts of ZMTrigger search the forums.
Example Script
Here is a script of connecting to an ipaddress that serves a value from a sensor. Wget is not as fast as possible, but this is simple and works quickly as a test.
#!/bin/bash counter=1 while [$counter -le 10] do PRESSURE=`wget ipaddress -q -O -` echo "1|show||||$PRESSURE" | telnet ipaddress 6802 sleep 4 #((counter++)) done
This text overlay can be used for any information, not just from the LAN. Maybe you want to overlay information from an online database or website.
Possible uses of text trigger
- temperature
- air pressure
- humidity
- sunset/sunrise time
- which alarm activated
- which person entered an electronically locked door
- random quote / message
- id of last camera alarm that went off on system
- the name of the person buying something from the POS system
- insert idea here
As an External Trigger
It is possible with minor effort, to communicate with ZMTrigger.pl at the Zoneminder Server IP Address, using a microcontroller and a device that does the actual triggering. Common options would be 8-bit microcontrollers such as the Arduino Uno, the ESP8266, or an ARM based SBC such as the Raspberry Pi, Beaglebone, and others.
Some benefits
- Fully customizable
- Less false positives
- Less CPU usage
Some drawbacks
- Some assembly required
- Probably more difficult than software motion detection built into ZM
Types of Controllers
This is up to you. If you have a wired ethernet connection available for the external sensor, then an Arduino Uno is a good choice. If you don't want to run ethernet, then an ESP8266 or Arduino w/wifi should do. An Arduino Uno will require a separate ethernet board. You can also connect an Arduino via USB, if the computer is within 15 feet.
Types of Sensors
You will need to decide which sensors to use. There are many options. I'll start with the common options, most likely to be used by a casual hacker. The first obvious options for Arduino solutions would be a PIR sensor, a Microwave sensor, or an Ultrasonic sensor.
PIR Sensors
PIR stands for Passive Infrared. These can be obtained from $4 and up online. Across auction sites from China for the cheapest, to hobbyist electronics stores for tested chinese products, and then for brand name sensors from electronics distributors like Digikey, Mouser, and Farnell. These sensors are useful, but have limitations.
- Range is limited to 10-20 Feet. Sensitivity can be tuned.
- Sunlight will cause false triggers. Direct OR indirect.
- Works good in a hallway, or room where no outdoor sunlight will penetrate.
Overall, the PIR Sensors are good if you have the right environment. They are not feasible outside, but indoors, away from sunlight, they do the trick.
Microwave Sensors
Microwave sensors operate in the 10-24GHz radio bands. The 10 GHz sensors have a range of about 20-30 feet for a person, more for large vehicles (reflective metal objects). The 24GHz sensors have shorter range. There are a variety of these, from brand name, to cheap. HB100 is a common 10GHz model, though it requires an external amplifier to read the uV signal. This can be as simple as an lm386 arduino module. Other sensors have circuitry built in to output a high or low signal depending on the motion, and how sensitive you make it. These sensors are a step above the PIR in some ways, but have their own limitations.
- Relatively short range for radio. Typically 10M, but some claim 15M. Depends on how conductive the item in motion is.
- Can't use multiple of these, as they may interfere with each other. (need to test)
- Items are detected greater when moving towards or away the sensor, not as much when moving across its field of sight.
Why don't I make a radio sensor that goes longer than 10M?
It's been done. And if they are within the ISM bands they can be used without FCC testing. More details here: make FMCW radars. Not easy but doable. The trick will be to make one that is practical enough but also not $100 each.
Ultrasonic Sensors
I have not and will not use ultrasonic sensors, but maybe someone else has some experience they can chime in with here (no pun intended).
- Uses high frequency sound, may disrupt animals.
Infrared Trip Sensors
It's easy to find infrared trip sensors (think a laser going from 10-50 feet across). These can be setup with a microcontroller, and if someone walks across the beam, you can activate the alarm. Some brands are Sick or Seco-larm Enforcer. If you need a real short IR (inches), off the shelf Arduino modules will work (ir photo beam detector). These can be purchased from distributors such as [1] and others online. Search the opto-electronics section (subject to change).
- Requires a bit of installation, though works well, when installed.
- Requires power at both ends of the laser.
- More Immune to sun interference than PIR
- One end must connect back to server somehow (ethernet/wifi/usb)
- Reasonably long distance. Some are up to 100M.
- Possible to avoid if you step over them. Put these aiming at a device that moves such as a door or gate. You can also get larger sensors, which can be a 6-7 feet tall, and are used in elevators to detect people in the doorway (search "elevator door sensors").
- These are all in the class of "photo electric sensors"
- the single beam modules (that don't have a receiver) may require a reflective sticker (bike reflector) on the other side
An example sketch is included in the links at the bottom.
Other Sensors
An infinite amount of devices could be used as triggers. House alarms use reed switches on windows and doors. If you have the capital, then there are many off the shelf products that can be purchased.
Troubleshooting
tail -f /var/log/zm/zmtrigger.log
Enable debug on it in the logs and set to 9. The logs that contain the /var/log/zm/ logs are the component logs in options.
MySQL server has gone away error
After following forum recommendations to use mysqltuner (see MySQL), mysqltuner told me to add wait_timeout=300 to my.cnf.
Unfortunately, ZMTrigger will disconnect every five minutes, if this is enabled. It appears that ZMTrigger will "Loading monitors" every five minutes, so you can't have a wait_timeout equal or lower than that. Otherwise the MySQL server will go away. If the wait timeout is higher, then ZMTrigger will "Loading monitors" without error.
This timeout error doesn't seem to adversely affect any other features of ZM so, a low wait_timeout may be acceptable if you don't use ZMTrigger.
The default wait timeout is 8 hours for MySQL. The solution seems to be add a wait_timeout >300, or use the default. Note that this might be fixed for ZM > 1.30.4 Reference:[2]
Notes
- It's possible to have the source name of the device reporting the trigger to ZMTrigger show up in the video feed.
This means you could have multiple sensors, each triggering a different location. A reed switch on a window, a laser on a door, etc... When the alarm goes off, the video feed displays the alarm that was triggered.
See Also
- Arduino Sketch via USB [5]
