Talk:Hauppauge WinTV-PVR 150/160

From ZoneMinder Wiki
Revision as of 12:27, 11 October 2006 by Adam Sulmicki (talk | contribs)
Jump to navigationJump to search

What chipset does it use? Sawireless2000 13:27, 9 July 2006 (BST)

Conexant CX23880

CORE cx88[0]: subsystem: 0070:2801, board: Hauppauge WinTV 28xxx (Roslyn) models [card=24,autodetected] TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe usb 1-1: configuration #1 chosen from 1 choice tveeprom 1-0050: Hauppauge model 28552, rev C158, serial# xxxxxxx tveeprom 1-0050: tuner model is Philips FM1236 MK3 (idx 58, type 43) tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08) tveeprom 1-0050: audio processor is CX880 (idx 30) tveeprom 1-0050: has radio cx88[0]: hauppauge eeprom: model=28552 cx88[0]/0: found at 0000:00:0b.0, rev: 5, irq: 193, latency: 64, mmio: 0xf7000000

zmc_dvideo1[29497]: ERR [Failed to setup memory: Invalid argument]

I am using kernel 2.6.17.13 anf ivtv 0.7.

I am really keen to get zone minder set up. Is there a trick that I have'nt performed. I'm using zm 1.22.2

This is my first post to wiki so I apologize if I got something wrong.

to the original author. May I suggest checking your card against http://ivtvdriver.org/index.php/Supported_hardware listing and updating entry. It would be very odd if that's really PVR-150 since most people associate PVR-150 with ivtv based card.

--Adam Sulmicki 18:27, 11 October 2006 (BST)

Retrieved from "http://wiki.staging.zoneminder.com/index.php?title=Talk:Hauppauge_WinTV-PVR_150/160&oldid=1720"